7 electrical engineer jobs found

Description: Join the Lockheed Martin Aeronautics team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE) for the United Arab Emirates (UAE) Air Force at Al Dhafrah Air Base (AB), UAE. This position will serve as the F-16 Avionics ATE Field Service Engineer (FSE) by providing on-site repair, advice, liaison, and training in the installation, operation and maintenance of equipment and systems related to F-16 avionics What You Will Be Doing * Provide on-site/on-equipment repair and informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. * Devise local informal training programs and provide advice in identifying needed training programs. * Render technical advice to resolve difficult and unusual maintenance problems. * Provide liaison through which...

Description: Join the Lockheed Martin Aeronautics team as an In-Country F-16 Field Service Engineer (FSE). This position is located at Abu Dhabi Air Base (AB), United Arab Emirate (UAE). This position will serve as the F-16 Avionics and APG Field Service Engineer (FSE) to support the United Arab Emirates Air Force by providing on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to all F-16 systems on and off the aircraft. What You Will Be Doing * Accomplish troubleshooting and analysis of aircraft discrepancies experienced in the field. * Attend maintenance meetings and debriefings to aid with rapid identification of emerging issues requiring company intervention and mitigate aircraft downtime. * Document unusual operations/maintenance issues ensuring company awareness and identify emerging failure trends. * Prepares and presents technical product information to customers. Post-installation...

Description: You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools. What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. What’s In It For You: 3 day weekends every weekend! Candidate must be able to work a 4x10B Tue -Fri From onsite to remote, we...

Description: You will be the Electrical Harness Backshop, Avionics Technician for the Lockheed Martin Greenville Electrical Backshop. Our team is responsible for backshop harness build, fabricating wires, continuity testing, and soldering/termination operations. What You Will Be Doing As the Production Hangar Avionics F-16 Technician you will be responsible for support by Building electrical harnesses, repairing harnesses, fabricating various wires, and performing solder/de-soldering, post fabrication testing, troubleshooting as required. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. • Frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. •...

Description: You will be the Production Hangar Avionics F-16 Technician for the Lockheed Martin Greenville Production Team. Our team is responsible for production line, installs of electrical harnesses/wires, continuity testing, and soldering/termination operations. What You Will Be Doing As the Production Hangar Avionics F-16 Technician you will be responsible for installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat,...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 2 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 2 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 3 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel,...