60 radio frequency engineer jobs found

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer Senior for the Aeronautics team which is responsible for advancing cutting‑edge aircraft technologies. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer Senior you will be responsible for leading requirements development, tracking, and verification testing of systems, and overseeing electromagnetic compatibility testing of developmental and deployable systems on flight‑test fighter platforms. Your responsibilities will include: Lead requirements development, tracking, and verification testing for system‑level projects. Conduct platform‑level Electromagnetic Compatibility (EMC) testing and develop test procedures for flight‑test modifications. Perform RF and antenna analysis, including COSITE assessments, antenna radome performance, and RF/fiber‑optic cabling evaluations. Oversee electromagnetic radiation hazard (EMRADHAZ) assessments and...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer for the Aeronautics team which is responsible for advancing cutting‑edge aircraft technologies. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer you will be responsible for leading requirements development, tracking, and verification testing of systems, and overseeing electromagnetic compatibility (EMC) testing of developmental and deployable payloads on flight‑test fighter platforms. Your responsibilities will include: Lead requirements development, tracking, and verification testing for system‑level projects. Conduct platform‑level EMC testing and create test procedures for flight‑test modifications. Perform RF and antenna analysis, including COSITE assessments, antenna‑radome performance, and RF/fiber‑optic cabling evaluations. Assess electromagnetic radiation hazards (EMRADHAZ) and ensure compliance with aircraft power and wiring...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer Staff, Level 4 for the Aeronautics team which is responsible for advancing cutting‑edge air‑mobility capabilities. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer Staff, Level 4 you will be responsible for leading requirements development, tracking, and verification testing of systems, as well as driving integration of developmental and deployable payloads onto air mobility platforms. Your responsibilities will include: Lead requirements development, tracking, and verification testing for system‑level projects. Conduct Electromagnetic Compatibility (EMC) testing and design flight‑test modification procedures. Perform RF/COSITE analysis, antenna‑radome performance assessments, and RF/fiber‑optic cabling evaluations. Lead key working groups and system/payload trade studies to inform design decisions. Coordinate domestic travel for...

Description: This position is for the Chief Engineer Manager – Cyber Security & Emerging Technologies (CSET) in the SP AP program area. The role reports to the SP AP Chief Engineer and leads a high impact, cross functional team delivering affordable, secure, future ready solutions in advanced cyber, electromagnetic (EM) warfare, 5G/6G radio frequency (RF), and micro electronics. The successful candidate will work closely with the entire Advanced Programs staff to ensure synergy across teams and to lead/participate in lessons learned communication What You Will Be Doing • Provide technical leadership for the CSET portfolio, setting direction, priorities, and performance targets. • Drive the capture and white paper process, translating emerging technology opportunities into competitive proposals that satisfy RFP requirements. • Own technical risk management, trade off analysis, and affordability metrics, establishing mitigation plans and continuous improvement indicators. •...

Description: WHAT WE ARE DOING: At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! Our programs utilize cutting edge technologies like Software Defined Radios (SDRs), high powered digital signal processing, and modern DevSecOps to support our SEMS portfolio and to dominate the RF spectrum. WHO YOU ARE: We are seeking a motivated and experienced Staff Digital Signal Processing Software Engineer to join our team. At a level 5 this person would be considered an emerging authority with 7+ years of experience working with the following: • Digital Signal Processing development • C++ development and integration • Software Defined Radios (SDRs) • Agile / Scrum methodology THE WORK: As a Staff...

Description: WHO WE ARE At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! As a team member on our Software Engineering team, you can help us take on the world’s most important and complex challenges by providing solutions to a variety of technical problems. Within the RMS SEMS we are seeking a motivated and experienced Software Engineer to support our team. The program enables the warfighter to utilize cutting edge technologies like Software Defined Radios (SDRs), high powered Radio Frequency (RF) Digital Signal Processing (DSP) hardware (HW), and modern DevSecOps to achieve their goals and dominate the RF spectrum. In this important role, you will collaborate with a diverse team of...

Description: We are Lockheed Martin Advanced Electronic Warfare (EW) capabilities enable F-35 pilots to locate and track enemy forces, jam radars and disrupt attacks with unparalleled effectiveness. Advanced avionics give the pilot real-time access to battle space information with 360-degree coverage and an unparalleled ability to dominate the tactical environment. Data collected by sensors on the F-35 will immediately be shared with commanders at sea, in the air or on the ground, providing an instantaneous, high-fidelity view of ongoing operations - making the F-35 a formidable force multiplier while enhancing coalition operations. This system allows F-35 pilots to reach well-defended targets and suppress enemy radars. The F-35 Mission Data organization is in need of a Mission Systems engineer with an understanding of EW and RF principles to help deploy the Common Reprogramming Tool (CRT) to our customers. The CRT will effectively provide our customers with a more efficient,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an experienced Guidance, Navigation, and Control (GNC) Engineer who will specialize in Modeling and Simulation (M&S) of complex technical solutions to join our team in sunny Dallas, TX! What You Will Be Doing This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control. Modeling & Simulation Engineer tasks include: • Design and documentation of model and simulation requirements and architecture • Develop, verify, and...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Engineer to provide state of the art Radar Cross Section testing. What You Will Be Doing The responsible engineer will be performing RF testing in an engineering development lab. Tasks will include but not limited to material, subcomponent, and system level testing. The RF engineer will be responsible for preparing comprehensive test reports and work with program leads. Aside from program work, the RF engineer will organize data and conduct health check of the anechoic chambers. Why Join Us We are committed to supporting your work-life...

Description: You will be a Safety Compliance Engineer with Lockheed Martin Missiles and Fire Control manufacturing facility in Troy, Alabama. Here, you will become a member of a dynamic Environmental, Safety, and Health team supporting all programs at the Troy site. What You Will Be Doing As a Safety Compliance Engineer, you will analyze accident and injury data to develop mitigation strategies, ensuring adherence to safety regulations and safeguarding employees from potential hazards. Your responsibilities will include, but are not limited to: Conducting compliance assessments to verify adherence to safety standards and procedures. Collaborating with cross-functional teams to implement ergonomic tools and practices within manufacturing operations. Developing job hazard analyses and risk assessments to support manufacturing processes. Conducting incident investigations with recommended corrective actions. Applying relevant standards such as DOD,...

Description: Seeking an FPGA Design Engineer to support RF Sensor Stimulation Hardware-in-the-Loop (HWIL) capabilities. FPGA Engineer to oversee the design, development and implementation of Radio Frequency (RF) signal modulation capabilities in FPGAs. Tasks for this position will include the definition of FPGA architecture, development of VHDL firmware and development of interfaces to ancillary HWIL HW. Also responsible for the integration, test, verification and validation of multiple subsystems. Basic Qualifications: • 8+ years of experience developing FPGA Programmable Logic • Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education • HDL programming experience with VHDL, Verilog, and/or System Verilog • Experience on Hardware-Software Integration and Validation • Familiarity with FPGA toolsets (Vivado, Libero, and/or Quartus strongly preferred) • Experience with electronics design...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an experienced Guidance, Navigation, and Control (GNC) Staff Engineer who will specialize in Modeling and Simulation (M&S) of complex technical solutions to join our team. What You Will Be Doing This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control. Modeling & Simulation Engineer tasks include: • Design and documentation of model and simulation requirements and architecture • Develop, verify, and validate both...

Description: Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking a Staff RF Engineer to join our team in Littleton,...

Description: You will be a Cyber Software Engineer, EMBEDDED in the Program Protection Organization. Our organization oversees all aspects of Anti-Tamper and embedded Cybersecurity across Missiles and Fire Control. We are chartered with providing the skills and innovative technologies to develop, design, produce and sustain secure products across our Lines of Business. What You Will Be Doing As the Cyber Software Engineer you will be responsible for supporting a broad range of challenges in a dynamic team environment and the ability to work with Cyber Exploitation Engineers, Cyber System Security Engineers and system engineers across Lockheed Martin MFC to develop new exploitation software tools, and maintain current capabilities. Your responsibilities will include: • Leverage your technical, and interpersonal skills in a structured team framework and work in a cross-functional engineering Team environment. • Employ a high level of productivity and responsiveness,...

Description: Lockheed Martin Missiles and Fire Control is looking for an experienced Mechanical Design Engineer to support development and production of a missile system. What You Will Be Doing: As the Mechanical Engineering Designer Staff, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: We are seeking a highly motivated and experienced Artificial Intelligence Engineer to join our Lockheed Martin Artificial Intelligence Center (LAIC) team. As a key member of our Applied AI team, you will play a critical role in developing technologies and products that leverage Artificial Intelligence to provide discriminating signal processing capabilities to our customers. You will work on a broad range of projects across the LAIC, from low Technical Readiness Level research to deployment and will be responsible for leading critical technical projects. Key Responsibilities: • Develop and Apply AI Technologies: • Develop and apply current AI paradigms, including computer vision, deep learning, and reinforcement learning, to solve complex signal processing problems and field innovative solutions. • Engage in every phase of the system development lifecycle, including requirements generation, system and software design, implementation, integration, and flight test. •...

Description: We are seeking a highly motivated and experienced Artificial Intelligence Engineer to join our Lockheed Martin Artificial Intelligence Center (LAIC) team. As a key member of our Applied AI team, you will play a critical role in developing technologies and products that leverage Artificial Intelligence to provide discriminating signal processing capabilities to our customers. You will work on a broad range of projects across the LAIC, from low Technical Readiness Level research to deployment and will be responsible for leading critical technical projects. Key Responsibilities: • Develop and Apply AI Technologies: • Develop and apply current AI paradigms, including computer vision, deep learning, and reinforcement learning, to solve complex signal processing problems and field innovative solutions. • Engage in every phase of the system development lifecycle, including requirements generation, system and software design, implementation, integration, and flight test. •...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Calibration Engineer to join our team in Dallas, TX. The RF Seeker Calibration Engineer is responsible for the calibration, testing, characterization, and performance validation of Radio Frequency (RF) seekers used in radar-guided systems, such as missiles, drones, or other precision-guided munitions. This role ensures that RF seekers (active, semi-active, or passive radar homing systems) meet stringent accuracy, reliability, and performance requirements through precise calibration procedures, data analysis, and troubleshooting in laboratory, anechoic...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a Sr Systems Integration and Test Engineer at Lockheed Martin's Andover, MA facility, to support the design, development, and maintenance of test consoles and automated test equipment (ATE) systems. What You Will Be Doing Our team is responsible for ensuring the production of reliable products that meet customer requirements, and you will play a key role in architecting new test stands, designing test solutions, and developing algorithms and techniques. Why Join Us We are committed to supporting your work-life balance and overall well-being,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a Systems Integration and Test Engineer at Lockheed Martin's Andover, MA facility, to support the design, development, and maintenance of test consoles and automated test equipment (ATE) systems. Our team is responsible for ensuring the production of reliable products that meet customer requirements, and you will play a key role in architecting new test stands, designing test solutions, and developing algorithms and techniques. Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling...