24 device engineer jobs found

Description SAIC is seeking an Senior Electrical Engineer to join our team in Crane, IN , in support of engineering, testing, and sustainment of radar systems employed by the U.S. Navy. The selected candidate will contribute to important projects supporting the development, maintenance, and documentation of systems critical to national defense. Job Responsibilities and Duties Software Development and Maintenance: Modify and develop software to meet new requirements. Develop instrumentation device drivers for new test equipment. Update software to correct identified deficiencies and adapt to changing environments. Develop software for one-time engineering tests and new testing techniques. Assist in the development and support of test sets and tools written in MATLAB. Lab-Based Testing and Hardware/Software Troubleshooting: Perform maintenance and development of automated test set software in a laboratory setting. Support daily production...

Description Position: Systems Engineer III (456) SAIC is seeking a Systems Engineer III to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports systems integration and testing for the DRAKE system. DRAKE is a portable, electromagnetic warfare jammer designed to protect Navy ships and personnel by detecting and defeating small unmanned aerial systems (UAS). DRAKE often acts in combination with the Joint Counter Radio-Controlled Improvised Explosive Device Electronic Warfare (JCREW) system to protect against both drones and electronic threats. You will be working onsite in a fast paced and dynamic environment where teamwork and collaboration are essential. SECRET to CLEARANCE Requirement: Interim Secret to start. Continued employment contingent upon favorable final Secret clearance. Responsibilities: • Develop and execute test procedures, cases, and plans under established guidance • Support Developmental Testing, including lab, integration,...

Description SAIC is seeking a Cellular Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports the design, development, integration, testing, and evaluation of cellular and wireless communication capabilities under the JCREW program. The selected candidate will analyze and develop cellular protocol implementations across 3G, LTE, and 5G environments. Additionally, this role involves performing software engineering using C, C++, and Python, executing structured test plans in laboratory or field environments, and contributing to test automation efforts. Job Responsibilities: Support the design, development, integration, testing, and evaluation of cellular and wireless communication capabilities in support of Government research, development, and test activities. Develop and assess cellular protocol implementations across 3G, LTE, and 5G environments. Perform software engineering activities including design, coding, integration,...

Description SAIC is seeking an Electrical Systems Engineer (EE2) to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports RF and electrical engineering for signal communications management and power distribution supporting test and evaluation activities. The selected candidate will design and optimize electrical and electronic test range infrastructure, including wired and wireless communications and fiber-to-cellular towers. Additionally, this role involves managing range power distribution systems, performing power system studies, and testing/evaluating threat devices. Job Responsibilities: Provide RF and electrical engineering support for signal communications management and power distribution in support of MXQT test and evaluation activities. Design, analyze, evaluate, and optimize electrical and electronic test range infrastructure, including wired and wireless communications systems. Manage and support fiber-to-cellular...

Description SAIC is seeking an Electronic Warfare Systems Engineer Senior to support the Expeditionary Electromagnetic Warfare Division at NSWC Crane and the Joint Counter - Radio Controlled Improvised Explosive Device EW (JCREW) program. This position will be responsible for the development of Signal Processing Engineering - algorithms, waveforms, and mission-load content for communications, networking, and Electronic Warfare (EW) systems. The selected candidate will design, model, implement, and test algorithm concepts through software for RF and EW applications. Additionally, this role involves performing radio frequency protocol analysis, evaluating waveform behaviors, and supporting diagnostic testing to resolve complex technical issues on Navy EW platforms. Job Responsibilities: Develop signal processing algorithms, waveforms, and mission-load content for communications, networking, and Electronic Warfare systems. Design, model, implement, and test algorithm...

Description SAIC is seeking a highly skilled Cross-Domain Network & Data Systems Engineer to support our work at Naval Surface Warfare Center (NSWC) Crane, Indiana in direct support of the Mach-CORE program. In this role, you will design, implement, and sustain secure network architectures enabling the controlled transfer of digital engineering data across multiple security classification boundaries. This position directly supports advanced weapons development environments, with a specific emphasis on enabling data exchange between external programs - most notably the Multi-Service Advanced Capability Hypersonic Accelerator (MACH-XL) - and internal analysis systems. This is a high-visibility, on-site role that places you at the intersection of network engineering, cybersecurity, and cutting-edge hypersonic weapons development - contributing directly to programs that define the future of national defense. Your Mission at SAIC Network Architecture & Infrastructure...

Description SAIC is seeking a highly capable Modeling, Simulation & Analysis (MS&A) / Digital Engineering Specialist to support our work at Naval Surface Warfare Center (NSWC) Crane, Indiana in direct support of the NSWC Crane Multi-Service Advanced Capabilities Hypersonics (MACH)-CORE program . In this role, you will lead the integration, translation, and analysis of advanced digital weapons system models into high-fidelity mission simulation environments. This position directly supports the ingestion of digital engineering artifacts from the MACH-XL program - often delivered in highly complex or unfamiliar data formats - and ensures accurate, efficient translation into the Advanced Framework for Simulation, Integration, and Modeling (AFSIM) . This is a high-impact, on-site role that places you at the intersection of digital engineering, modeling & simulation, and cutting-edge hypersonic weapons development - contributing directly to programs that define...

Description SAIC is looking for a Test Engineer to work with our team at Crane NSWC in Crane, IN. This position requires a candidate with a background in electronics engineering and a proven track record in designing, developing, and executing end-to-end tests for complex, high-speed digital and RF systems. The ideal candidate will possess an understanding of test methodologies and hands-on experience with a wide range of test equipment and processes, including: Developing test code routines, Interface Test Adapters (ITAs), Operational Test Program Hardware, and all associated documentation. Developing each Test Program Set (TPS) as a screen-only or fault detection test in accordance with established requirements. Creating stimulus and response test vectors to achieve fault detection ratings using Logic Automated Stimulus and Response (LASAR) simulation software. Designing hardware and software interface devices to integrate Weapons Replaceable Assemblies (WRAs) and/or...

Description SAIC is seeking an experienced and results-driven Program Manager - Mobility Systems to lead and oversee the successful execution of complex Department of Defense (DoD) ground mobility programs. This position is responsible for managing a diverse portfolio of military ground vehicle programs spanning the full spectrum of tactical mobility platforms, including Legacy Light Tactical Vehicles (LLTV), All-Terrain Vehicles (ATV), Internally Transportable Vehicles (ITV), High Mobility Multipurpose Wheeled Vehicles (HMMWV), Joint Light Tactical Vehicle (JLTV), Medium Heavy Tactical Vehicles (MHTV), and Ultra-Light Tactical Vehicles (ULTV). The Program Manager will serve as the primary point of contact for customers, stakeholders, and internal leadership, ensuring all program objectives are met on time, within scope, and within budget. This role requires a dynamic leader with technical knowledge of military ground mobility systems and vehicle integration combined with...

Description Drafter/CAD Operator Location: Bedford, IN | Full-Time | Onsite About the Role SAIC is seeking an Drafter/CAD Operator to support a new contract for DoD. In this role the Drafter/CAD Operator will provide drafting and documentation support as part of a collaborative production team. The Drafter/CAD Operator will report directly to the Manufacturing Engineer and will play a key role in creating and updating Technical Data Packages while working closely with other engineers, technicians, and customers to capture and document design requirements. Key Responsibilities Create and modify detailed drawings using Solid Edge CAD software. Develop and update Technical Data Packages in accordance with applicable military and industry standards. Work closely with customers, engineers, technicians, and other personnel to capture design intent and requirements. Work both independently and collaboratively to effect changes to design and documentation. Perform a...

Description SAIC is seeking an experienced and results-driven Program Manager to lead and oversee the successful execution of complex Department of Defense (DoD) and government programs focused on Intelligence, Surveillance, and Reconnaissance (ISR) systems, sensor integration, modeling and simulation, prototyping, system design, and drone dominance solutions. The Program Manager will serve as the primary point of contact for customers, stakeholders, and internal leadership, ensuring all program objectives are met on time, within scope, and within budget. This role requires a dynamic leader with technical knowledge of ISR and sensor systems combined with strong business acumen and a proven track record of delivering mission-critical solutions in support of warfighter requirements. Program Execution & Delivery Lead end-to-end program management for DoD contracts focused on ISR, sensor systems, ECP development, modeling and simulation, prototyping, and...

Description SAIC is seeking a well-rounded Senior Test Engineer to lead test activities for a team of EEs, MEs, programmers and other project personnel involved in delivering concepts and products related to aircraft and other military systems. The candidate will directly support Government program(s) as a test engineer throughout the entire program lifecycle. This position will be onsite at our facility in Indianapolis, IN. JOB DUTIES: The candidate will support test during all aspects of design and will test and debug circuit card assemblies, embedded systems and other hardware and software systems. Candidate will be expected to lead and advise other test personnel as well as other engineers. Candidate will work multiple projects and will develop test plans, procedures and reports. Candidate will work with test equipment architects to determine test strategies for products. Candidate will work with team on requirements allocation, will identify best method for...

Description SAIC is currently seeking an Engineering Tech III to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with SolidEdge and SolidWorks 3D parametric software, as well as PDM, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. JOB DESCRIPTION: Creates and modifies detailed models and drawings using SolidWorks and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture...

Description SAIC is currently seeking an Engineering Tech IV to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with SolidEdge and SolidWorks 3D parametric software, as well as PDM, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. Job Description: Creates and modifies detailed models and drawings using SolidWorks and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture...

Description SAIC is seeking a motivated and highly skilled Mechanical Engineer to join our team focused on the design, development, and deployment of innovative maritime off-board countermeasure systems. This role offers a unique opportunity to contribute to developing advanced mechanical systems that protect naval vessels from threats. The successful candidate will be a creative problem-solver, applying a strong mechanical engineering foundation to support the system lifecycle, from concept development to production and delivery. Knowledge or experience in maritime domain systems and/or countermeasure technologies is highly desirable. Key Responsibilities: Collaborate with multi-disciplinary teams (engineers, designers, and analysts) to design, develop, and test mechanical systems and components for maritime countermeasure technologies. Participate in all phases of the product lifecycle, including requirements analysis, system design, fabrication, testing, and...

Description Position - Senior Electronics Technician (495) We are currently seeking a highly skilled and motivated Senior Electronics Technician to provide critical hands-on support for the Expeditionary Electronic Warfare division (MXQ) at NSWC Crane. In this role, you will be instrumental in Counter-Unmanned Aircraft Systems (CUAS) test and evaluation activities involving threat devices, unmanned aircraft systems, RF systems, sensors, test equipment, and supporting field infrastructure. Job Responsibilities Your primary job responsibilities will include supporting threat device operations such as configuration, inspection, readiness verification, staging, inventory control, operation, recovery, maintenance, and post-test accountability. You will serve as a UAS pilot or support technician for CUAS test events, which involve obtaining and maintaining required UAS pilot certifications, licenses, and customer-required qualifications to operate unmanned target devices,...

Description SAIC is seeking a Draftsman to provide drafting and documentation support for NSWC Crane. In this role you will support a team creating/updating Technical Data Package(s) using Creo, SolidWorks 3D parametric Software and Windchill. Be able to understand, preform and be able to be trained quickly and efficiently to the processes and procedures that are required. JOB DUTIES: Creates and modifies detailed models and drawings using SolidWorks and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture design, revise existing documentation and attend meetings. Works independently as well as in a collective team effort to effect changes to design and/or documentation Able to delegate tasking and advice to other team members while maintaining quick decision making under pressure. Able to keep Configuration Management of the tasking, files and correspondences as required to complete...

Description Position Title: Systems Engineer Senior (536) Position Description: SAIC is seeking a Senior EW Systems Engineer to support the Expeditionary Electromagnetic Warfare Division at NSWC Crane. This position supports the integration of critical communication, force protection, and electromagnetic spectrum capabilities into Navy and DoD mission systems. Ultimately, by systematically identifying technical risks and managing Engineering Change Proposals, the role guarantees that EW assets remain resilient, compatible, and operationally dominant against evolving adversary threats. Job Responsibilities: Analyze operational needs and develop, allocate, validate, and maintain system/subsystem requirements and traceability. Support system architectures, functional baselines, design alternatives, and technical trade studies. Develop and review Interface Control Documents (ICDs) and coordinate hardware, software, network, data, and subsystem interfaces. Support laboratory...

Description SAIC is seeking a motivated and highly skilled Mechanical Engineer to join our team focused on the design, development, and deployment of innovative maritime off-board countermeasure systems. This role offers a unique opportunity to contribute to developing advanced mechanical systems that protect naval vessels from threats.The successful candidate will be a creative problem-solver, applying a strong mechanical engineering foundation to support the system lifecycle, from concept development to production and delivery. Knowledge or experience in maritime domain systems and/or countermeasure technologies is highly desirable. Responsibilities may include: Collaborate with multi-disciplinary teams (engineers, designers, and analysts) to design, develop, and test mechanical systems and components for maritime countermeasure technologies. Participate in all phases of the product lifecycle, including requirements analysis, system design, fabrication, testing, and...

Description SAIC is seeking an SCA Drafter/CAD Operator II to support the US Navy in Crane, IN. JOB DESCRIPTION: This position will provide drafting and documentation support for NSWC Crane. In this role you will support a team creating/updating Technical Data Packages using SolidWorks 3D parametric Software. JOB DUTIES: Creates and modifies detailed models and drawings using SolidWorks and other 3D parametric CAD Software(s) Works closely with the Customer, Engineers, Technicians and other CAD Operators to capture design Works independently as well as in a collective team effort to effect changes to design and/or documentation Performs a variety of moderate and complex tasks and have the ability to use a variety of tools to include, but not limited to, Calipers, Gauges, Tape Measure, Ruler and other mechanical devices to aid in design development and verification/validation of first article pieces Qualifications Required Education and...