55 engineering jobs found

Description SAIC is seeking an Engineering Technician to assist in multiple areas of customer support including part and material testing, shock testing, and other testing. The Engineering Technician performs task assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy (or conformity with instructions). This technician performs at this level one or a combination of such typical duties as: Constructing or disassembling components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions Following specific layouts, procedures, drawings, or scientific diagrams to construct, tear down, and/or package undersea sensor components and subunits of equipment...

Description SAIC is looking for an Engineering Technician V to support CAC2S-Afloat systems and in Bedford, IN. JOB DESCRIPTION: Be able to provide semi-professional technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement. The Engineering Technician V performs non-routine and complex assignments involving responsibility for planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project, selects and adapts plans, techniques, designs, or layouts, contacts personnel in related activities to resolve problems and coordinate the work, reviews, analyzes, and integrates the technical work of others. Supervisor or professional engineer outlines objectives, requirements, and design approaches. Designs, develops, and constructs major units, devices, or equipment; conducts tests or experiments; analyzes results and redesigns or...

Description SAIC is seeking a QA Engineering Technician to support or team in Indianapolis, IN . Job Duties: Supports programs and processes which establish and maintain quality standards of products and services. Implement and/or follow procedures, policies, and technical solutions to support business operations. Collects, maintains, organizes, compiles, and reports data. Monitor and verify quality in accordance with established processes or other control procedures. Support the following areas: engineering, production/repair depot, business process improvement, etc. Inspections, quality control, and final buy off on mechanical parts/subassemblies and circuit boards. Using various instruments to include calipers, gauge pins, micrometers, etc. Taking measurements of machined parts to verify specifications. Inspecting Subassemblies. Verifying quality control of parts from vendors. Qualifications Required Experience and...

Description SAIC is seeking an Engineering Technician IV to work with our JXNS Branch at Crane NSWC, IN. Applicants must be able to Provide technical support for assigned systems or platforms to include modification, maintenance and repair within the JXNS Branch. Provide technical support for the JXNS to include performing tasks such as assembling, installing, maintaining, and troubleshooting equipment. Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment; coordinate test schedules; prepare inputs for test plans; review test plans and procedures; conduct or monitor system, subsystem, equipment or component testing; adjust units under test; analyze test results; and determine valid recommendations and conclusions based on test data. Qualifications REQUIRED EXPERIENCE AND EDUCATION: AA Degree in related discipline and two (2) years or more of related experience; Or, High...

Description SAIC is currently seeking an Engineering Tech IV to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with Creo and SolidWorks 3D parametric software, as well as Windchill, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. Job Description Roles & Responsibilities: Creates and modifies detailed models and drawings using Creo and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and...

Description SAIC is seeking an SCA Engineering Technician V to support the US Navy in Crane, IN. JOB DESCRIPTION: Perform CCA (Circuit Card Assembly) testing and repair on RFBU (Radio Frequency Blanking Unit) CCAs. Review documentations, standard operating procedures, and drawings to determine component root cause analysis troubleshooting Operate hand tools and test equipment Troubleshooting and problem-solving: Identifying and resolving issues/malfunctions using specialized test equipment and diagnostic tools Conduct routine repair, retrofit, systems integration, calibration and testing; in-line repair and testing; operation of test equipment Installing, maintaining, repairing, and modifying various types of equipment, including electrical, electronic, and mechanical systems Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Assists in determining...

Description SAIC is seeking a detail-oriented and skilled Engineering Technician I to join our team as a Cable Assembly Technician supporting the US Navy in Bedford, IN. JOB RESPONSIBILITES: The ideal candidate will be responsible for assembling, testing, and troubleshooting various types of cable assemblies used in different applications for military applications. This entry-level position offers a great opportunity to develop hands-on experience and grow within our engineering and manufacturing team. Qualifications REQUIRED EDUCATION AND EXPERIENCE: High School Diploma/GED and zero years of experience. No clearance required to start however must have the ability to obtain a secret clearance. SAIC will sponsor the clearance process. Ability to perform repetitive tasks with precision. Capability to lift and handle materials weighing up to 25 pounds. Standing, sitting and twisting for periods at a time. Proficiency with hand tools. PREFERRED EXPERIENCE:...

Description SAIC is seeking experienced Engineering Technicians to join our growing team at the Bedford Production Facility. Candidates must demonstrate expertise in system integration and assembly work and be comfortable working individually or as part of a team. Primary Responsibilities: Complete all assigned tasks as required for the project completion, including though not limited to mechanical system assembly, metal fabrication, electrical system installation, painting, etc... Maintaining readiness of equipment and tools to complete all given tasking. As part of the team, participate in efforts to improve processes and procedures for tasks that meet production and integration objectives. Conduct inspections, tests, evaluations, and document results for equipment and processes, proactively identifying and resolving issues to minimize rework. Duties may include additional logistics work as needed to ensure all items are staged and ready for operational tasks....

Description SAIC is seeking a highly motivated SCA Engineering Technician III to support the Specialized Munitions Division and Munitions Sustainment Branch at Naval Surface Warfare Center (NSWC) Crane, IN. The technician will be responsible for the preparation, coating, and sustainment of industrial parts and military systems. This role involves performing detailed surface treatments, applying specialized finishes, in addition to conducting mechanical and technical duties such as disassembly, inspection, and reassembly of critical equipment. The position requires adherence to strict safety, quality, and operational protocols in support of national security objectives. Key Responsibilities Surface Preparation & Coating: Perform sanding, cleaning, scraping, masking, and patching of industrial parts. Apply military-grade primers, paints, and coatings using brushes, rollers, and spray equipment. Technical & Mechanical Duties: Disassemble, inspect, test, and reassemble...

Description SAIC is seeking an Engineering Technician in Crane, IN. Job Description: This position will provide IT engineering and technical support for research, design, development, installation, operation, and maintenance for physical and electronic security systems and components, as well as the IT systems and network infrastructure which support such systems. Physical and electronic security systems are comprised of major components from vendors including AMAG, Genetec, Motorola (Pelco), and Axis. Supporting IT systems and infrastructure include Dell EMC servers, workstations, thin clients, and network attached storage, Microsoft Windows Server, Active Directory, group policy, client operating systems (Windows 10/11), and Microsoft Office suite, Cisco network infrastructure, and Vertiv (Avocent) IP KVM devices. Job Duties Include: Perform installation, upgrades, maintenance, and facilitate lifecycle replacement of IT systems Coordinate, integrate and...

Description SAIC is seeking a Cable & Harness Technician to support the US Navy in Indianapolis, IN. JOB DUTIES: Reads and follows assembly prints, work instructions, drawings, procedures and specifications used in the manufacturing of Cables and Harness. Diagnose and repair damaged or malfunctioning wiring harnesses, using a variety of tools and diagnostic equipment. Identify and rectify any defects or issues in the harnesses, such as miswiring, poor connections, or insulation damage. Identifies by sight workmanship and material defects in touch-up and assembly areas and may be able to suggest basic changes to the work instructions to improve operations in these areas. Performs tasks with a high degree of care / Quality and attention to details while maintaining a clean and safe work environment. Assembles cables & harness assemblies, and adapters by working from samples, Technical Data packages, visual aids, wiring lists and Work Instructions. Maintains...

Description SAIC is seeking a Guidance, Navigation, and Control (GN&C) Modeling and Simulation Aerospace Engineer to support hypersonic weapon systems development in Crane, IN. As a critical member of our team, you will help design, model, and validate GN&C systems for hypersonic weapons, with a focus on simulation development, algorithm design, and performance analysis in a mission-critical environment. Your work will directly contribute to optimizing weapon system performance in high-speed and harsh environments. NOTE: This is a hybrid position requiring the candidate to be in office 1-4 times per week. JOB RESPONSIBLITIES: Develop, implement, and refine GNC algorithms for guidance, control, and navigation Support hypersonic weapon system modeling and simulation, including 6 DOF (six degrees of freedom) simulations Perform trajectory analysis, mission performance evaluations, and control system stability assessments Analyze telemetry, flight test data, and...

Description SAIC is seeking a Senior Electrical Engineer with deep experience troubleshooting and supporting Hardware-in-the-Loop (HWIL) test environments. The selected candidate will play a crucial role in the development, integration, and test of a next-generation Hypersonic Missile System , supporting real-time test operations, electrical diagnostics, and weapon-system-level performance verification. This position requires on-site support at NSWC Crane to enable hands-on work with lab hardware, missile subsystem interfaces, and high-fidelity real-time simulation equipment. Key Responsibilities: HWIL System Troubleshooting & Diagnostics Diagnose and resolve issues within complex HWIL testbeds involving sensors, avionics, embedded computing, and closed-loop weapon-system interfaces Identify root causes related to component failures, degraded signals, hardware performance, or timing anomalies Conduct detailed fault isolation across interconnected hardware,...

Description JOB DESCRIPTION : SAIC is seeking a Senior Mechanical Engineer to lead multi-disciplinary engineering teams and projects related to the design, manufacture, and sustainment of US military equipment and systems and other related systems in support of its Indianapolis facility. This position will be a hybrid role with approximately (1-4 days per week onsite) at our Indianapolis, IN facility. JOB DUTIES : May work with teams developing, producing, and sustaining radar and related RF systems, electronic warfare systems, communications equipment and systems, acoustic systems, electro-optic systems, weapon system launch and control systems, test equipment, and other military equipment. Candidate is expected to have mastery in the use and application of technical standards, principles, theories, concepts and techniques for designing mechanical constructs. Candidate is expected to be able to work independently and solve complex engineering problems...

Description SAIC is seeking a Cellular Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports the design, development, integration, testing, and evaluation of cellular and wireless communication capabilities under the JCREW program. The selected candidate will analyze and develop cellular protocol implementations across 3G, LTE, and 5G environments. Additionally, this role involves performing software engineering using C, C++, and Python, executing structured test plans in laboratory or field environments, and contributing to test automation efforts. Job Responsibilities: Support the design, development, integration, testing, and evaluation of cellular and wireless communication capabilities in support of Government research, development, and test activities. Develop and assess cellular protocol implementations across 3G, LTE, and 5G environments. Perform software engineering activities including design, coding, integration,...

Description SAIC is seeking a Test and Evaluation Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports developmental test and evaluation activities for Electronic Warfare (EW) systems and subsystems across their lifecycle under the SENSEI program. The selected candidate will develop detailed test plans, procedures, and reports to verify and validate system requirements. Additionally, this role involves designing and executing laboratory and field tests, operating RF measurement equipment, and analyzing test data to produce technical assessments. Job Responsibilities: Support developmental test and evaluation (DT&E) activities for Electronic Warfare systems and subsystems across the system lifecycle. Develop detailed test plans, procedures, and test reports to support verification and validation of system requirements. Design, plan, and execute laboratory and field tests, including RF and microwave system testing....

Description SAIC is seeking a Software Systems Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports software development, design, and integration activities for Electronic Warfare (EW) systems, tactical information systems, and training environments under the JCREW program. The selected candidate will design, develop, modify, and maintain software and firmware throughout the system lifecycle. Additionally, this role involves testing software, performing requirements traceability, managing code repositories using git, and troubleshooting integrated systems in both lab and field environments. Job Responsibilities: Design, develop, modify, integrate, test, and maintain computer software and firmware supporting Electronic Warfare systems, tactical information systems, test facilities, and training environments. Support software efforts across the lifecycle, including initial system design, new development, upgrades to fielded...

Description SAIC is seeking an Electrical Systems Engineer (EE2) to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports RF and electrical engineering for signal communications management and power distribution supporting test and evaluation activities. The selected candidate will design and optimize electrical and electronic test range infrastructure, including wired and wireless communications and fiber-to-cellular towers. Additionally, this role involves managing range power distribution systems, performing power system studies, and testing/evaluating threat devices. Job Responsibilities: Provide RF and electrical engineering support for signal communications management and power distribution in support of MXQT test and evaluation activities. Design, analyze, evaluate, and optimize electrical and electronic test range infrastructure, including wired and wireless communications systems. Manage and support fiber-to-cellular...

Description SAIC is seeking a Senior Electronics Technician to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports electronic systems, integration and testing for the Testing Infrastructure Group (TIG). TIG at NSWC Crane provides specialized, high-reliability facilities and engineering expertise for the full life cycle --design, development, test, and evaluation --of Navy strategic systems, electronic warfare, and weapon systems. They focus on critical testing for radiation hardening, hardware-in-the-loop, and complex electronic systems to ensure mission success. You will be working onsite in a fast paced and dynamic environment where teamwork and collaboration are essential. You are required to obtain a SECRET clearance. Responsibilities: Independently plan and accomplish complex technical projects or studies; serve as a technical expert in specialized engineering areas related to electronics, RF, microwave systems, or environmental...

Description SAIC is looking for a Quality Assurance Technician to support the quality assurance and engineering responsibilities associated with MK48 programs at our East gate facility in Bedford, IN. JOB DUTIES: Support quality assurance and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product Collaborates with engineering laboratory and production functions to ensure quality standards are in place Performs paint and other coating inspections at SAIC and supplier locations Performs pre-shipment inspections of completed systems prior to delivery Assists in root cause analysis and troubleshooting of findings from quality inspections and manufacturing Maintains documentation of quality inspections in accordance with SAIC procedures and customer requirements Communicates discrepancies to vendors or coordinates with procurement regarding vendor performance Performs internal audits, as...