15 radar systems engineer jobs found

Description SAIC is seeking a highly qualified and experienced RADAR Systems Engineer for an immediate opening with the SENSE + INTERDICTION (SENSEI) Counter Unmanned Aerial Systems (CUAS)/Counter Unmanned Systems (CUxS) Research and Development (R&D) program in Crane, IN. This position requires technical expertise in the areas of RADAR technology, Radio Frequency (RF) engineering, and the ability to evaluate similar RADAR systems against defined operational and technical parameters. We are looking for a candidate to support the identification, analysis, and technical evaluation of high performance Active Electronically Scanned Array (AESA) RADAR systems. The teammate must be capable of high-level output centered on the identification, assessment, test, and evaluation of RADAR replacement candidates compatible with the SENSEI system. The primary responsibility will be to conduct an Analysis of Alternatives and provide the results to the government customer. You...

Description SAIC is seeking a System Safety Engineer to provide critical safety engineering analysis and support for the Submarine Launched Cruise Missile - Nuclear (SLCM-N) development program. This advanced role involves integrating safety principles across the entire Department of Defense (DoD) acquisition lifecycle while adhering to MIL-STD-882E guidelines. The selected candidate will contribute to the design, development, and deployment phases of this next-generation weapons system, focusing on subsystem or whole-system safety, as required. This role requires close collaboration with multidisciplinary teams consisting of engineers, program managers, and government stakeholders while also maintaining oversight of vendor activities. The candidate will work in a high-priority national defense environment, enabling safe and effective execution of a program critical to U.S. defense capabilities. Note: The position supports remote, onsite, or hybrid work at NSWC Crane...

Description SAIC is seeking a System Safety Engineer to provide critical safety engineering analysis and support for the Submarine Launched Cruise Missile - Nuclear (SLCM-N) development program. This advanced role involves integrating safety principles across the entire Department of Defense (DoD) acquisition lifecycle while adhering to MIL-STD-882E guidelines. The selected candidate will contribute to the design, development, and deployment phases of this next-generation weapons system, focusing on subsystem or whole-system safety, as required. This role requires close collaboration with multidisciplinary teams consisting of engineers, program managers, and government stakeholders while also maintaining oversight of vendor activities. The candidate will work in a high-priority national defense environment, enabling safe and effective execution of a program critical to U.S. defense capabilities. Note: The position supports remote, onsite, or hybrid work at NSWC Crane...

Description SAIC is seeking a H ardware Engineer with expertise in fiber optics f or shipboard Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) systems. This program will be part of a transformative venture, driving the future of next generation afloat mission effectiveness through the integration ofcutting-edge commercial off-the-shelf (COTS) systemsand network technologies using fiber-optic infrastructure. Job Duties: Develop, update and maintain engineering documents Stage 4 and 5 test procedures for integrated C5ISR and COTS systems. Interface control documents, cable block diagram, fiber optic cable topology, and wiring diagrams specific to fiber optic cables, connectors and back shells. Qualifications Required Education and Experience: Bachelors in Electrical Engineering and two (2) years or more relevant experience hardware engineering (focused on fiber optics...

Description SAIC is seeking a Systems Engineer for shipboard Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) major systems. This program will be part of a transformative venture, driving the future of next generation afloat mission effectiveness in response to evolving strategic and environmental demands. This position is contingent upon award news expected Spring of 2026. Duties: Develop, update, and maintain project Systems Engineering documents including stage 4 and 5 test procedures, engineering block diagrams, and system manuals for shipboard C5ISR systems Works with the multidisciplinary technical team to ensure successful shipboard industrial test procedures development and testing Please view our Program page for more information and to view all open positions available: SAIC - Shipyard C5ISR Integration Careers Qualifications Required Education and...

Description SAIC is seeking an experienced Machine Learning Modeling and Simulation Engineer to support a customer in Chantilly, VA. The successful applicant will demonstrate flexibility in task execution and provide technical expertise across a variety of Machine Learning (ML) and Modeling and Simulation (M&S) topics, including developing and training ML models, designing simulation frameworks, conducting performance analyses, and applying data-driven approaches to solve complex problems. In this role, the successful candidate may also assist with Systems Engineering topics (e.g., requirements, configuration management, readiness, verification and validation, etc.) to ensure seamless integration of ML capabilities within simulation environments. As a trusted advisor, the candidate will be expected to provide value-added judgment and offer strategic recommendations to the customer on program objectives, advanced technologies, and system enhancements. The successful...

Description SAIC is seeking a Radar Phenomenology Engineer to join the Air Force, Space and Intelligence Business Group. You would work on a joint Intelligence Community (IC) and Department of Defense (DoD) crown jewel program providing highly specialized space/counter-space engineering, scientific, and analytical services from Aurora, Colorado. We support the Nation's leading-edge IC and DoD space programs and offer compelling, deep-technical work that has direct influence and impact on program development and operations. Our team has Subject Matter Experts (SMEs) across a variety of disciplines, including physics, math, RF, optics, space acquisition and operations, and intelligence collection and analysis. Duties and responsibilities include: Conducting specialized technical studies related to radar systems, targets, and data products to provide assessments and actionable solutions for program managers or satellite owner/operators. Leading and participating...

Description SAIC is seeking a Senior Embedded Software Engineer to join on our team at our customer site in North Charleston, SC. Roles/Responsibilities: (include, but are not limited to) Interface with a variety of protocols and sensors to collect data at edge nodes Development of code (C++, Java, Python) for optimizing low SWaP operations in distributed sensor systems Ensure a cyber-compliant software architecture is developed ranging from edge node to cloud resources Develop software streamlined for DoD operations with high availability, high reliability, and minimal downtime Qualifications Required Education and Experience: Bachelor's degree and five (5) years of experience Experience with data collection in distributed sensor systems Relevant experience with developing modular code suited for rapid integration of new sensors, communications, and processing algorithms Experience with microcontrollers and interfacing...

Description SAIC is seeking an experienced Modeling and Simulation Engineer to support a customer in Chantilly, VA. The successful applicant will demonstrate flexibility in task execution and provide technical expertise on a variety of Modeling and Simulation (M&S) topics, including system performance modeling, design analysis, scenario development, and data visualization. In this role, the successful candidate may also assist with Systems Engineering topics (e.g., requirements, configuration management, readiness, verification and validation, etc.) to ensure comprehensive continuity across multiple program activities. As a trusted advisor, the candidate will be required to deliver value-added judgment and provide well-informed recommendations to the customer on program objectives, technical strategies, and system capabilities. The successful candidate will produce thorough, actionable, and consistent deliverables that align with the organization's goals and objectives...

Description SAIC is seeking an experienced CAD Modeling and Simulation Engineer to support a government customer in Chantilly, VA. The successful applicant will demonstrate adaptability in task execution and provide technical expertise across a variety of Computer-Aided Design (CAD) and Modeling and Simulation (M&S) topics, including 3D modeling, design visualization, structural analysis, and simulation of system performance. In this role, the successful candidate may also assist with Systems Engineering activities (e.g., requirements, configuration management, readiness, verification and validation, etc.) to ensure the effective integration of CAD models within broader simulation and analysis frameworks. As a trusted advisor, the candidate will be expected to deliver thoughtful recommendations and offer value-added insights to the customer on program objectives, cutting-edge design technologies, and system optimization. The successful candidate will produce technically...

Description SAIC is seeking an Engineer Technician for shipboard Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) major systems. This program will be part of a transformative venture, driving the future of next generation afloat mission effectiveness in response to evolving strategic and environmental demands. Job Duties: Assist with the planning, development, and execution of stage 4 and 5 test procedures development and test execution for shipboard C5ISR systems. Utilizes specialized test equipment to complete C5ISR Stage 4 and Stage 5 testing. Works with the multidisciplinary technical team supporting engineering activities such as design, test, checkout, modification, fabrication and assembly of C5ISR systems. Works from schematics, diagrams, written and verbal descriptions, layouts using Autocad and PDF formats to perform testing, checkout and trouble shooting functions. Prepares...

Description SAIC is seeking a highly skilled Radar Engineer to join our elite team supporting Landmark AOS, SAIC's flagship Prime SETA program in Chantilly, VA. Landmark AOS provides critical Systems Engineering and Technical Advisory (SETA) expertise to the NRO's Ground Enterprise Directorate (GED)-the organization responsible for architecting, acquiring, and integrating the nation's most advanced space and ground systems across the full end-to-end lifecycle. In this role, you will serve as a trusted technical advisor guiding the development, integration, and modernization of next-generation GEOINT and radar-based mission processing capabilities. You will work side-by-side with world-class engineers, government leaders, and mission partners to shape resilient, high-performance solutions that directly impact national security. Key Responsibilities to include: Advance RF/Radar resiliency initiatives by partnering with IC stakeholders to evaluate emerging...

Description JOB DESCRIPTION: SAIC is seeking a Fleet Liaison Team (FLT) Member to support Jammer Technique Optimization (JATO). The candidate will function as an integral part of a team of government, military, and contractor personnel that provides technical reports and employment recommendations to operators of EA-18G and other Electronic Warfare (EW) platforms. JOB DUTIES: Perform technical analysis on radar and communications systems of interest and apply knowledge of Airborne Electronic Attack (AEA) systems to author and edit JATO Techniques, Analysis, and Tactics (JTAT) documents and provide peer reviews for JTATs and other fleet products. Serve as a liaison between JATO engineers and US Navy and Royal Australian Air Force aircrew to provide on-call support. Answer Requests for Information (RFIs) and provide technical training presentations to VAQ squadrons and Weapons Schools. Support on-site test, flight, and simulation events by providing...

Description JOB DESCRIPTION: SAIC is seeking a Fleet Liaison Team (FLT) Member to support Jammer Technique Optimization (JATO). The candidate will function as an integral part of a team of government, military, and contractor personnel that provides technical reports and employment recommendations to operators of EA-18G and other Electronic Warfare (EW) platforms. JOB DUTIES: Perform technical analysis on radar and communications systems of interest and apply knowledge of Airborne Electronic Attack (AEA) systems to author and edit JATO Techniques, Analysis, and Tactics (JTAT) documents and provide peer reviews for JTATs and other fleet products. Serve as a liaison between JATO engineers and US Navy and Royal Australian Air Force aircrew to provide on-call support. Answer Requests for Information (RFIs) and provide technical training presentations to VAQ squadrons and Weapons Schools. Support on-site test, flight, and simulation events by providing...

Description SAIC is seeking Field Service Engineers (FSE) to support the Medusa Sustainment project, at Andrews Air Force Base, which is a U.S. Air Force solution for defense against small unmanned aerial systems (s-UAS). The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. Job Responsibilities: Provide field engineering and technical support services to maintain and sustain fielded C-sUAS systems, equipment, and software at designated locations. Install, operate,...