15 radio frequency engineer jobs found

Description SAIC is seeking an Electrical Engineer with focus on Radio Frequency principals to support the Expeditionary Electronic Warfare Division at NSWC Crane under the JCREW program. In this role, you will design, integrate, and evaluate RF and electronic warfare technologies, collaborating with multidisciplinary teams to analyze signals, conduct lab and field testing, and deliver key engineering recommendations. Key Responsibilities Support development, integration, testing, and evaluation of RF/EW systems and test infrastructure. Analyze RF hardware architectures, including transmit/receive chains and interfaces. Use lab equipment (spectrum analyzers, VNAs, signal generators) to measure and evaluate signals. Support lab and field testing, handling setup, execution, troubleshooting, and post-test analysis. Perform RF signal analysis, waveform generation, modulation assessment, and RF propagation modeling. Provide recommendations to improve test rigor,...

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking an Systems Engineer to support the Infrared and Radio Frequency (IR/RF) Surface Offboard Countermeasures Engineering Branch located at NSWC Crane in Crane, Indiana. The candidate will provide high level of technical and engineering support for Nulka systems. Job Description, includes but not limited to: Support engineering activities such as design, test, modification, fabrication and assembly of prototype electronic and mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. . Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Assist in preparing engineering documentation,...

Description A U.S. Government (USG) program office conducting research and development (R&D) in artificial intelligence (AI), machine learning (ML), and advanced sensing seeks a subject-matter expert (SME) to serve as a contractor Systems Engineering and Technical Assistance (SETA) advisor. The SIGINT R&D Engineer will support Government leadership in managing a portfolio of research and development projects. The role emphasizes post-award program execution, technical oversight, acquisition support, and budget execution. The successful candidate will help shepherd new project concepts through the acquisition process; assess technical approaches and developer performance; and provide objective, technically informed recommendations to Government Program Managers and acquisition personnel. Experience with radio frequency (RF), electronic warfare (EW), and signals intelligence (SIGINT) technologies is required. R&D experience is preferred; AI/ML...

Description SAIC is seeking an Engineering Technician V to support the US Navy in Oak Habor, WA. The Engineering Technician performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Completed work is reviewed for technical adequacy and satisfaction of requirements. This incumbent may train and be assisted by lower-level technicians, and perform one or a combination of the following: Fabricate, install, test, troubleshoot, modify, and repair various wire harnesses on ground and airframe applications. Conduct various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and recording test data....

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Job Description: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and mitigate advanced...

Description SAIC is seeking an Electronic Warfare Systems Engineer Senior to support the Expeditionary Electromagnetic Warfare Division at NSWC Crane and the Joint Counter - Radio Controlled Improvised Explosive Device EW (JCREW) program. This position will be responsible for the development of Signal Processing Engineering - algorithms, waveforms, and mission-load content for communications, networking, and Electronic Warfare (EW) systems. The selected candidate will design, model, implement, and test algorithm concepts through software for RF and EW applications. Additionally, this role involves performing radio frequency protocol analysis, evaluating waveform behaviors, and supporting diagnostic testing to resolve complex technical issues on Navy EW platforms. Job Responsibilities: Develop signal processing algorithms, waveforms, and mission-load content for communications, networking, and Electronic Warfare systems. Design, model, implement, and test algorithm...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Key Responsibilities: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and...

Description Description SAIC is looking for a Radio Frequency (RF) Systems Engineer to provide management and outreach support to the government customer RF Program Manager. This includes utilizing knowledge and background in RF technology and development to support a government program manager in technical evaluation, project management, and execution of RF technology research and development (R&D). This position is in Chantilly, VA. Job Description: Advise RF PM on technical aspects of the RF portfolio Plan and support technology maturation throughout the R&D lifecycle Plan and execute all budgetary aspects of the R&D Program Guide future RF technology development strategy and roadmaps Support transition of mature RF hardware to system program offices for flight development Survey state-of-the-art RF technologies and provide technical recommendations Drive advancement of resiliency activities/initiatives in RF technology Support all phases of the...

Description SAIC is seeking a qualified Command, Control, Communications, Computers/Information Technology (C4/IT) Engineer to join our team and provide critical support to Marine Corps Installation Command (MCICOM) Defense Policy Initiative (DPRI) Pacific Posture Military Construction (MILCON) efforts in Guam, Tinian, and Darwin. The ideal candidate will bring extensive, recent experience in providing technical support to project teams and ensuring planning and design efforts meet U.S. Marine Corps (USMC) C4/IT mission capability requirements for each facility within the MCICOM-DPRI framework and/or Naval Information Warfare Center (NIWC) Pacific (PAC) Code-H operations. *THIS IS A FULLY REMOTE ROLE BUT MUST BE LOCAL TO GUAM* The responsibilities for this position include serving as a technical representative and subject matter expert (SME) by providing on-site assessments and answers to Requests for Information; reviewing and commenting on various MILCON C4/IT...

Description Join a mission driven satellite program at the forefront of national defense innovation. Our team is developing cutting edge technologies that directly support critical Department of War priorities, combining both proven and first-of-their-kind capabilities that have never been applied in space. Operating within a fast-paced acquisition environment, we benefit from streamlined authorities and direct access to senior Government decisionmakers, enabling us to move quickly and execute aggressive schedules using the most innovative contracting strategies available. SAIC is seeking self-directed leaders who skillfully navigate ambiguity, solve complex challenges, and bring diverse expertise to a dynamic environment focused on delivering capability rapidly. Success here requires adaptability, initiative, and a willingness to wear multiple hats in support of a high impact mission. Candidates experienced as USAF/USSF acquisition officers (AFSC: 63A) or developmental...

Description SAIC is seeking a Space Mission Analysis Lead to join the National Security and Space Sector (NSS). You would work on a joint Intelligence Community (IC) and Department of Defense (DoD) crown jewel program providing highly specialized space/counter-space engineering, scientific, and analytical services from Aurora, Colorado. We support the Nation's leading edge IC and DoD space programs and offer compelling, deep-technical work that has direct influence and impact on program development and operations. Our team has Subject Matter Experts (SMEs) across a variety of disciplines, including physics, math, RF, optics, space acquisition and operations, and intelligence collection and analysis. This Space Systems Mission Engineer Lead will work in a collaborative team-focused environment of U.S. Government civilians and contractors solving applied technical problems and developing usable solutions for multiple space-related capabilities and threats. The ideal candidate...