55 rf engineer jobs found

Description Description SAIC is looking for a Radio Frequency (RF) Systems Engineer to provide management and outreach support to the government customer RF Program Manager. This includes utilizing knowledge and background in RF technology and development to support a government program manager in technical evaluation, project management, and execution of RF technology research and development (R&D). This position is in Chantilly, VA. Job Description: Advise RF PM on technical aspects of the RF portfolio Plan and support technology maturation throughout the R&D lifecycle Plan and execute all budgetary aspects of the R&D Program Guide future RF technology development strategy and roadmaps Support transition of mature RF hardware to system program offices for flight development Survey state-of-the-art RF technologies and provide technical recommendations Drive advancement of resiliency activities/initiatives in RF technology Support all phases of the...

Description Senior Electronic Warfare / Radio Frequency Engineer Location: Oxnard / Point Mugu, CA Minimum Clearance Required: Active Secret (ability to obtain TS/SCI) Company: SAIC Business Unit: Navy Business Group (Supporting NAWC-WD, Pt. Mugu) Job Description SAIC is seeking a Senior Electronic Warfare (EW) / Radio Frequency (RF) Engineer to support the Naval Air Warfare Center Weapons Division (NAWC-WD) at Pt. Mugu. This role provides high-impact engineering expertise for Airborne Threat Simulation, Airborne Electronic Attack (AEA), and complex integration/system development activities supporting fleet and test-range missions. Responsibilities Leads the development of end-to-end EW and RF mission system architectures spanning airborne, range and laboratory test environments in support of AEA IPT threat simulation and RF sensor program activities. Leverages subject matter expertise depth and breadth with strong interpersonal skills to effectively...

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC is seeking a RF Engineer a position located in Riyadh, Saudi Arabia and Al Jubail, Eastern Province, Saudi Arabia that will provide installation and integration support for C4I System racks and components for the Royal Saudi Naval Forces (RSNF). This position is field-based, requiring hands-on work in operational environments rather than being conducted in a traditional office or laboratory setting. The RF Engineer will be responsible for but not limited to the following Job Duties: Work within the Technical Support Center responsible for system communications verification and perform RF cabling, terminations and operational testing during installations of systems into RSNF vessels, command centers and training facilities. Experience conducting Electromagnetic Interference (EMI) surveys before an installation to establish the current EMI baseline. Experience with post-installation surveys to determine any EMI changes after equipment installation....

Description SAIC has an opening for a Space RF Payload subject matter expert (SME) with in-depth knowledge of digital signal processing, signals, remote sensing, mission analyses, and system engineering. You will provide subject matter expertise to support customer decisions with respect to contractors' development of spaceborne RF signal processing payloads, ground processing systems, and overall mission capabilities. You will work in customer facilities in El Segundo, CA , directly sitting with our customers to provide our support. You will perform the following duties and "fun stuff": Responsible for acting as primary technical oversight for the development, build, verification and deployment of Space RF payloads, providing Government leadership, as needed, recommend course corrections to the payload design and build through delivery. Requirements generation. Evaluation and compliance assessments to generated requirements and requirements flow down. Concept...

Description SAIC seeks an experienced and energetic Senior Principal Systems Engineer to directly support the modernization of the space launch ranges, meeting mission requirements, providing range capabilities, and supporting the Assured Access to Space (AATS) mission. The overarching purpose of the program is to perform system modernization and digital transformation projects that will enable the acceleration of the space launch cadence to enable the Spaceport of the future. This position is located in Santa Maria, California. The Western Range (WR) Lead Systems Engineer will provide technical leadership across complex, cross-functional initiatives, driving systems architecture, integration, scalability, and operational excellence. This role partners closely with program management, product, and engineering teams to define system requirements, lead design reviews, ensure compliance with enterprise standards, and oversee delivery of high-quality system solutions. Job...

Description SAIC is seeking a highly motivated Senior Electrical Engineer to join our team, supporting the design, development, troubleshooting, testing, and in-service support of the Common Aviation Command and Control System (CAC2s) program for our customer site in North Charleston, SC . Roles/Responsibilities: (include, but are not limited to) Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education:...

Description SAIC is seeking a well-rounded Systems Engineer to lead a team of EEs & MEs, and other project personnel to deliver concepts and products related to weapon systems, aircraft and other military systems. The candidate will directly support Government program(s) as project lead throughout the entire program lifecycle. The candidate will support all aspects of design to include, but not limited to, design, development, documentation, testing and production transition. Candidate will be expected to possess excellent communication skills to interface to multi-disciplinary design team and logistics team. Candidate will also perform detailed trade studies, requirements allocation and interface definition studies to translate customer requirements into engineering specifications. Candidate will author documents to system compliance with customer requirements. As part of daily duties, candidate ensures the effective team implementation of product requirements into total...

Description SAIC is seeking a Senior Test Engineer to support the US Navy in Crane, IN. Job Description: The Testing & Troubleshooting Engineer will support the EA-18G Growler program by developing, executing, and maintaining test solutions for electronic warfare (EW) receiver systems and RF/microwave components. This role focuses on test system integration, debugging, root-cause analysis, and improving test coverage from component to system level. Job Responsibilities: Design and implement test methods, sequences, and setups for EA-18G FST and receiver systems. Debug existing test hardware and software to resolve test failures and anomalies. Perform hands-on troubleshooting of test stands and Units Under Test (UUTs) using RF test equipment (VNA, spectrum analyzer, signal generator, power meter, etc.). Distinguish between UUT issues, test equipment issues, and software defects, and implement corrective actions. Identify and address test gaps and escapes between...

Description SAIC is looking for a Test Engineer to work with our team at Crane NSWC in Crane, IN. This position requires a candidate with a background in electronics engineering and a proven track record in designing, developing, and executing end-to-end tests for complex, high-speed digital and RF systems. The ideal candidate will possess an understanding of test methodologies and hands-on experience with a wide range of test equipment and processes, including: Developing test code routines, Interface Test Adapters (ITAs), Operational Test Program Hardware, and all associated documentation. Developing each Test Program Set (TPS) as a screen-only or fault detection test in accordance with established requirements. Creating stimulus and response test vectors to achieve fault detection ratings using Logic Automated Stimulus and Response (LASAR) simulation software. Designing hardware and software interface devices to integrate Weapons Replaceable Assemblies (WRAs) and/or...

Description SAIC is seeking a highly motivated Electrical Engineer to join our team, supporting the design, development, troubleshooting, testing, and in-service support of the Common Aviation Command and Control System (CAC2s) program for our customer site in North Charleston, SC . Roles/Responsibilities: (include, but are not limited to) Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education:...

Description SAIC seeks an experienced and energetic Senior Hardware Engineer to directly support the modernization of the space launch ranges, meeting mission requirements, providing range capabilities, and supporting the Assured Access to Space (AATS) mission. The overarching purpose of the program is to perform system modernization and digital transformation projects that will enable the acceleration of the space launch cadence to enable the Spaceport of the future. This position is located in Santa Maria, CA. Job Responsibilities: Perform electrical and mechanical (signal, power & thermal) analysis at the rack level. Oversees installation and testing activities, attending planning reviews, engineering checkouts, functional testing, and walkdowns to verify system integrity and interface functionality. Generation of engineering drawings in accordance with ASME and IEEE standards, including rack assembly drawings, interconnect wiring diagrams and...

Description SAIC is seeking a highly skilled Hardware Design Engineer with expertise in board-level circuit design. The ideal candidate will be capable of taking concepts from initial requirements through detailed circuit design, PCB layout, simulation, system integration, and hands-on laboratory validation. This role requires strong analytical skills, attention to detail, and proficiency working across RF, analog, and digital domains. Qualifications Key Responsibilities: Perform conceptual circuit design and develop system block diagrams. Select key components based on electrical, RF, thermal, and manufacturability requirements. Create detailed board layouts using Altium Designer, including schematic capture, component library creation, footprint definition, and fabrication documentation. Place and route PCB designs with attention to RF behavior, signal integrity, grounding, and manufacturability. Conduct circuit simulation using various engineering...

Description SAIC is seeking a RADAR Systems Engineer (GEOINT Ground) to provide Systems Engineer Technical Advisor (SETA) services for a critical position on an SAIC's Prime Program, supporting the NRO in Chantilly, VA. As the RADAR Systems Engineer (GEOINT Ground) you will provide technical support to facilitate the development of GEOINT capabilities cooperatively with development contractors and mission partners to optimize mission success. You will also actively perform engineering and analysis to ensure programs successfully develop and deliver core mission processing services in all phases of the acquisition life cycle. Job Duties to include: Serve as a trusted technical advisor to NRO leadership, providing systems engineering expertise across Radar/RF ground processing and mission operations programs. Drive the development of next-generation Radar/RF mission capabilities through architecture analysis, requirements development, systems integration, and acquisition...

Description SAIC is hiring a Senior Radar Systems Engineer to provide Systems Engineering and Technical Assistance (SETA) support to a classified Government customer in Chantilly, VA. You will support the development, integration, test, launch, and checkout of a radar-enabled national security space system, providing technical analysis, contractor oversight, test data review, and anomaly resolution across space and ground segments. Responsibilities include, but are not limited to: Analyze radar payload designs, RF architectures, waveforms, and sensor performance for spaceborne GEOINT missions. Provide independent SETA insight into contractor activities, including design reviews, technical trades, risks, and requirements/schedule compliance. Develop, refine, and trace system- and payload-level requirements across space, ground, and mission-processing segments. Support integration, test, launch, and on-orbit checkout, including test data review, performance assessment,...

Description SAIC is seeking a Senior Payload Systems Engineer to provide 100% onsite Systems Engineering and Technical Assistance (SETA) support to a classified Government customer in Chantilly, VA. This role directly supports the development, integration, test, launch, checkout, and on-orbit operations of national security space systems carrying electro-optical (EO) and synthetic aperture radar (SAR) payloads. The selected candidate will provide independent technical analysis, technical review, monitoring of development contractor activities, test data review, and anomaly resolution support, while serving in a customer-facing advisory role to Government stakeholders. Responsibilities include, but are not limited to: Serve as a primary technical advisor and customer-facing liaison to Government stakeholders on EO and/or SAR payload development, integration, test, launch, checkout, and on-orbit operations. Support planning, execution, monitoring, and oversight of multiple...

Description SAIC is seeking a well-rounded Senior Test Engineer to lead test activities for a team of EEs, MEs, programmers and other project personnel involved in delivering concepts and products related to aircraft and other military systems. The candidate will directly support Government program(s) as a test engineer throughout the entire program lifecycle. This position will be onsite at our facility in Indianapolis, IN. JOB DUTIES: The candidate will support test during all aspects of design and will test and debug circuit card assemblies, embedded systems and other hardware and software systems. Candidate will be expected to lead and advise other test personnel as well as other engineers. Candidate will work multiple projects and will develop test plans, procedures and reports. Candidate will work with test equipment architects to determine test strategies for products. Candidate will work with team on requirements allocation, will identify best method for...

Description SAIC is seeking a well-rounded Electrical Engineer to support test activities for a team of EEs, MEs, programmers and other project personnel involved in delivering concepts and products related to aircraft and other military systems. The candidate will directly support Government program(s) as a test engineer throughout the entire program lifecycle. This position will be onsite at our facility in Indianapolis, IN . JOB DUTIES : The candidate will focus on testing at the Circuit Card Assembly (CCA) level. Candidate will analyze CCA designs and will design tests to fully verify functionality of the CCAs. Candidate will design test hardware and write code as needed to test and troubleshoot CCAs and the resident embedded software (SW) and firmware (FW). Candidate will interpret test results and will work with other engineers to improve CCA, SW, and FW designs. Candidate is expected to possess excellent communication skills to interface to...