636 engineering jobs found

Description SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are strictly in accordance with...

Description SAIC is seeking an Engineering Technician V to support the US Navy in Oak Habor, WA. The Engineering Technician performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Completed work is reviewed for technical adequacy and satisfaction of requirements. This incumbent may train and be assisted by lower-level technicians, and perform one or a combination of the following: Fabricate, install, test, troubleshoot, modify, and repair various wire harnesses on ground and airframe applications. Conduct various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and recording test data....

Description SAIC is seeking an Engineering Technician for our customer site in North Charleston, SC to support the US Navy to install cable, mounting kits and other equipment in radio rooms of new construction submarines. JOB DESCRIPTION: Work with others who prepare design drawings and assist with the design, evaluation, and/or modification of machinery and equipment. Integrate and fabricate cables. Qualifications REQUIRED EDUCATION AND EXPERIENCE: Education: Associate's Degree in Engineering Technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program; or High School diploma or GED. Experience: Five (5) with degree/formal training or seven (7) years with HS/GED of practical experience to include: design, preparation and modification of engineering documents and drawings. Individual shall have notable...

Description SAIC is seeking an Engineering Technician V to support Specialized Munitions for NSWC Crane, IN. Typical tasking includes engineering/planning for production projects, both short-term tactical planning to long-term strategic planning. JOB DUTIES: Engineering Tech Support - support project development, equipment repair and preventive maintenance support. Tactical Support - develop scope and cost estimates in support of tactical projects. Provide project planning, track progress to schedule, and action item resolution. Strategic Support - prepare cost estimates and provide an assessment to recommend the best alternative. Provide investment recommendations to the Government with high-level cost, schedule, and priority identified. Provide project planning, track progress to schedule, and action item resolution. Operations and Sustainment Support - Provide project management expertise to participate in operations and sustainment planning meetings to track project...

Description SAIC is looking for an Engineering Technician III in Crane, IN to support the U.S. Navy. Job duties include: Provide test and evaluation, troubleshooting, lot acceptance, qualification, engineering analysis, documentation, procedure/process creation, shipment/receipt and vendor coordination of batteries. Provide test and evaluation of various battery chemistries, including Li-ion, Lithium Iron Disulfide, Lithium Calcium and Lead Acid. Support battery testing that will consist of testing temperature/humidity cycling, pressure/altitude, acceleration, vibration, and mechanical shock. Qualifications REQUIRED QUALIFICATIONS: Associate's Degree in Electrical Technology or related field. Additional years of experience accepted in lieu of degree Must be able to obtain a Secret Clearance. Interim Secret needed to start. Must be a U.S. citizen Experience with Microsoft Excel and Word Ability to read electrical drawings Must have excellent...

Description SAIC is looking for an Engineering Technician IV in Bedford, IN to support the U.S. Navy. This position will need someone experienced with building mechanical and electrical assemblies, knows e-mail etiquette, and can communicate with both CIV and CTR. This position is perfect for someone that is organized and willing to work in small teams and with government oversight. Job duties include but are not limited to: Using hand tools and power tools to assemble according to engineering drawings Building wire harnesses and cable assemblies using mechanical and soldered contacts. Wiring system to schematics and engineering drawings and testing of electrical circuits. Using test equipment to test and analyze power, Ethernet, and RF cables. Documenting completed work cards, processes, and reporting to program manager. Performing tasks such as integration of system components, modifications to systems, and testing system functionality. Implementing...

Description SAIC is currently seeking an Engineering Tech IV to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with Creo and SolidWorks 3D parametric software, as well as Windchill, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. Job Description Roles & Responsibilities: Creates and modifies detailed models and drawings using Creo and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and...

Description SAIC is seeking an Engineering Technician in Middletown, RI . In this role, you fabricate, update, qualify, and troubleshoot electronic, electro-mechanical systems including constructing cable and harnesses. To perform these tasks, you will work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform duties. You will work with engineers and customers to resolve technical issues that arise and to qualify systems. You will be responsible for marking up and documenting changes as well as clarifying methods and processes to perform tasks to supply engineer documentation. Applicants should have experience of performing required tasks in similar product environment. JOB DUTIES : Fabricate electronic / electro-mechanical test equipment. Fabricate wire cables and harnesses Inspect, test, and perform qualification processes for systems and sub-assemblies. Troubleshoot technical issues to functionality and...

Description SAIC is seeking an Engineering Technician V to support the Infrared and Radio Frequency (IR/RF) Surface Offboard Countermeasures Engineering Branch located at NSWC Crane in Crane, Indiana. This technician will provide high level support for MK-53, MK-59 and LEED. Job Description: Support engineering activities such as design, test, modification, fabrication and assembly of prototype electronic and mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. . Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Prepares engineering documentation, reports, drawings (sketches/flow...

Description SAIC is seeking an experienced Engineering Technician to join our growing team at the Bedford Production Facility. Candidates must demonstrate expertise in system integration and assembly work and be comfortable working individually or as part of a team. Primary Responsibilities: Complete all assigned tasks as required for the project completion, including though not limited to mechanical system assembly, metal fabrication, electrical system installation, painting, etc... Maintaining readiness of equipment and tools to complete all given tasking. As part of the team, participate in efforts to improve processes and procedures for tasks that meet production and integration objectives. Conduct inspections, tests, evaluations, and document results for equipment and processes, proactively identifying and resolving issues to minimize rework. Duties may include additional logistics work as needed to ensure all items are staged and ready for operational...

Description Position: Junior Engineering Technician SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are...

Description Position: Junior Engineering Technician SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are...

Description SAIC is seeking a GEOINT Ground Systems Engineering & Operations Thread Engineer to join SAIC's Prime SETA program supporting the NRO in Chantilly, VA . As the GEOINT Ground Systems Engineering & Operations Thread Engineer, you will serve as a mission-thread integrator, ensuring that GEOINT ground capabilities-from tasking to collection to processing to dissemination-operate coherently across programs, contractors, and enterprise stakeholders. You will work daily with senior Government leads, SETA teammates, and development contractors to baseline new capabilities, assess emerging technologies, shape architectural decisions, and ensure readiness of mission-critical ground services. Key Responsibilities to include: Support end-to-end engineering and analysis across GEOINT ground mission threads, ensuring technical and operational coherence from collection tasking through mission processing and product delivery. Support definition, decomposition, and...

Description SAIC is seeking a SIGINT Ground Mission Engineering & Integration Lead to serve as a team lead supporting a fast-paced and highly dynamic SIGINT System Program Office in Chantilly, VA. As the Senior SIGINT Ground Mission Engineering & Integration Lead, you will provide high-impact technical, architectural, and acquisition expertise across the full life cycle of SIGINT ground hosting, processing, and enabling capabilities. Your work will directly influence the development, integration, and sustainment of the customer's modern Ground Enterprise. As a key member of the mission engineering team, you will help guide Government leadership through complex engineering, cloud-architecture, and programmatic decisions that shape the future of SIGINT ground capabilities. This includes supporting the definition, evaluation, and evolution of mission-driven technical architectures; spanning hybrid cloud environments, Kubernetes-based services, CI/CD pipelines,...

Description SAIC is looking for a Mobility Field Service Rep in Camp Pendleton, CA to support our Combat and Strategic Systems Operation in supporting 1st and 2nd echelon maintenance, and Operator/Maintenance Training on the Medium and Light Tactical Vehicle Platforms in support of Naval Surface Warfare Center (NSWC) Crane tasking portfolio. JOB DESCRIPTION: Identify and replace components and conduct functional tests to return articles to service; document maintenance and inspection actions; review technical documentation to identify planned maintenance action requirements; review and implement service advisory/service bulletins; and provide analysis and recommendations for changes and improvements to equipment installation, operation, modification, and maintenance for equipment. Support all vehicle systems to include communication, engine repair, automatic transmission, manual transmission, suspensions, brakes, electronic systems, heating and air, and ancillary...

Description SAIC is seeking an Engineer Technician for shipboard Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) major systems. This program will be part of a transformative venture, driving the future of next generation afloat mission effectiveness in response to evolving strategic and environmental demands. This position is hybrid and the candidate must live within an hour of Pascagoula, MS. Job Duties: Utilizes specialized test equipment to complete C5ISR communications, networks, and sensor systems testing. Works from schematics, diagrams, written and verbal descriptions, system layouts using Autocad and PDF formats to perform test procedures development, system testing, checkout and trouble-shooting functions. Qualifications Required Education and Experience: AA Degree in related discipline and one (1) years or more relevant experience with one or more shipboard C5ISR systems: radio...

Description SAIC is seeking an experienced and dedicated DevSecOps Engineer Principal to support the design, deployment, operation, and maintenance of secure, scalable Cloud products and services within our Cloud-based environment. As a key member of our team, you will play a critical role in ensuring the efficiency, security, and automation of our development and operational processes. The ideal candidate will possess deep expertise in Kubernetes, Infrastructure as Code, AWS GovCloud, FedRAMP/FISMA security control implementation, and CI/CD pipeline engineering, with an unwavering commitment to a security-first mindset. This role can be worked 100% remotely within the united states. Candidates must have the ability to get a secret clearance. Qualifications Bachelor's degree in Computer Science, Information Technology, Cybersecurity, or related field with 9+ years of experience in DevOps/DevSecOps engineering roles. Masters and 7 years of experience....

Description SAIC is seeking a detailed-oriented Technical Writer to work at the Naval Undersea Warfare Center alongside the government customer. As a Technical Writer, you will apply strong writing, editing, and technical communication skills to develop, revise, and maintain clear, accurate publications that support mission, operational, engineering, research, and administrative activities. You will produce reports, manuals, briefings, proposals, instructional materials, catalogs, and other documentation addressing work methods, procedures, and the installation, operation, and maintenance of systems and equipment. You will collaborate with subject-matter experts and cross-functional teams to translate complex technical, scientific, or operational information into usable content for intended audiences. Your expertise will help ensure publications are technically accurate, well organized, consistently formatted, and delivered on schedule. You may also review and refine the work...

Description SAIC has an immediate opening for top talent to join our team supporting an Intelligence Community (IC) customer at the NRO as a full-time IT Procurement and Asset Management (IPAM) Project SETA in the Northern Virginia area. Qualified candidates must have a current TS/SCI with Polygraph clearance. Job Description: Provide project management SETA support to assist an Intelligence Community (IC) customer by providing technical expertise, continuity of effort, and value-added judgement to advise senior customer leadership on a full spectrum of project management and systems engineering activities. Facilitate user access for enterprise procurement tool, manage and report lifecycle metrics, maintain records, administer communications, and afford data integrity and uniformity for our IT Procurement and Asset Management (IPAM) customer(s). Lead and/or support contract program management for one or more of the following areas: enterprise IT networks, user facing...

Description SAIC is seeking a Mechanical Engineer to serve as an In-Service Engineering Agent (ISEA) in support of hypersonic weapons systems deployed aboard the Zumwalt-class DDG-1000 destroyer and Virginia-class submarines. This position plays a critical role in ensuring operational readiness, technical integrity, and lifecycle sustainment of cutting-edge hypersonic strike capabilities. As an ISEA, you will serve as a key technical authority bridging the gap between the engineering baseline and fleet operations. You will work collaboratively with Fleet Support Representatives, government program offices, and cross-functional engineering teams to ensure delivered systems align with system and subsystem requirements throughout their operational lifecycle. NOTE: This position is 100% remote/work from home. Monthly travel to Crane, IN is required. What You'll Do: Serve as a primary In-Service Engineering Agent (ISEA) for hypersonic weapons systems, providing mechanical...