32 production assembler jobs found in Marietta, GA

Description: You will be the Production Assembler C130 for the team which is responsible for using jigs, fixtures, rivet‑upsetting equipment, and hand tools to assemble aircraft components. What You Will Be Doing As the Production Assembler C130, you will be responsible for reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts. Your responsibilities will include: Setting up and using jigs and fixtures to ensure precise part alignment Operating rivet‑upsetting and bench‑assembly equipment to secure fasteners Applying rules, squares, protractors, and dividers to verify geometry and dimensions Performing arithmetic, including decimals and fractions, to calculate material requirements and tolerances Working to exacting tolerances required for each assembly operation What’s In It For You We are committed to supporting your...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: This occupation performs the scope of complete aircraft assembly at all stages of production prior to flight line operations. An employee in this position may perform a wide variety of operations across multiple skill sets with highly concurrent assembly of aircraft structures, systems installations, and verifications. This occupation requires performing the complete assembly, installation, and integral mating of structural components, sub-assemblies, and assemblies. This includes rework, repair, and incorporation of design changes during major component assembly, mate, and final assembly. Works from detail, assembly, and installation blueprints, production illustrations, 3D models, planning, or other authorized documents. Works with authorized personnel as necessary to determine satisfactory assembly and installation sequence and to build completely the subassemblies and assemblies accordingly. Points out need for tooling, parts, or assembly corrections as needed....

Description: Lockheed Martin is seeking a Multi-Functional Manufacturing Supervisor (Level 3) to lead a team of 8-10 hourly bargaining unit associates in C-130J Final Assembly production. This role is instrumental in ensuring cost, schedule, and quality performance, while implementing lean manufacturing principles to drive continuous improvement and operational excellence. What You Will Be Doing Leadership & Supervision: • Supervise a team of 8-10 hourly bargaining unit associates in C-130J Final Assembly production. • Oversee employee training, performance management, and compliance documentation. • Partner with human resources and union stewards to address and resolve employee-related matters. Production & Process Management: • Implement lean manufacturing principles to optimize production efficiency and reduce waste. • Set and prioritize tasks to support and exceed production schedules. • Conduct investigations and problem resolution activities as required. • Manage...

Description: The story of aviation has always been the story of people who have the perseverance to fail, to try again and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission results has been ingrained in our culture. It is that passion combined with a strategic focus on ever changing global opportunities that shapes our path forward. What You Will Be Doing Initiate Pre-Planning Analysis and detailed Engineering or Manufacturing pre-plans to support the procurement, manufacture and installation of F-35 aircraft components. • Responsible for review and acceptance of new or revised Engineering drawings to ensure compatibility with drafting procedures and producibility of part requirements in accordance with established manufacturing procedures. • Provide technical assistance to hourly Tool Planners involved in analyzing Engineering requirements and development/initiation...

Description: You will be the C-130 Final Assembly Manager - Level 5 for the Final Assembly, Trim, Engine Shop and Component Paint team which is responsible for delivering high‑quality C130J aircraft. What You Will Be Doing As the C-130 Final Assembly Manager - Level 5 you will be responsible for leading culture, safety, FOD, quality, cost and schedule obligations for a 130‑person team on the C130J program. Your responsibilities will include: Drive a safety‑first culture and enforce FOD‑control standards. Ensure product quality meets stringent aerospace requirements. Manage cost performance and drive continuous improvement. Maintain schedule fidelity and mitigate delivery risks. Mentor and develop both salaried staff and artisans/mechanics. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. In this role, you will immediately impact the business with your ingenuity, creativity, and ideas that will be the catalyst for future business. If you are craving an opportunity where you are invited to be passionate, push the envelope, and think outside of the box, this opportunity with our Skunk Works may be just for you. We ensure those we serve always stay ahead of ready. As a Manufacturing Engineering Manager (L5) in Skunk Works®, you will...

Description: You will be the Fabrication-Heat Treat Mechanic for the team which is responsible for heat treating and age hardening and testing of steel, and aluminum production parts and their alloys, rivets, steel tooling parts and stock. What You Will Be Doing As the Fabrication-Heat Treat Mechanic, you will be responsible for determining the heat treat process and quenching required to obtain results, and determining proper timing and temperature of ovens, salt baths according to material composition, shape, size and thickness. Your responsibilities will include: Heat treating production steel and aluminum parts, tooling parts, dies and stock made from steel or steel alloys Operating hand or power equipment to change furnace or bath and quenching, and checking and maintaining heat treat solutions Operating age hardening ovens by checking orders for correct material and preceding heat treat, and setting controls for proper heat and time according to...

Description: You will be the Assembly Worker Structures Sr - C130 for the team which is responsible for laying out and locating structural components or assemblies in making production assemblies as specified by design changes. What You Will Be Doing As the Assembly Worker Structures Sr - C130, you will be responsible for performing difficult structural pick-up and/or rework such as removing, replacing, or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies. Your responsibilities will include: Working structural changes which materially alter previous assembly references and practice Performing trimming, reforming, and altering parts and structures as required Fabricating detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners, and patches Performing portable milling operations on wing and center section attaching joints Improvising shop aids to facilitate assembly and installation as...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...

Description: You will be the Aeronautical Engineer - MRB for the Engineering Team which is responsible for... What You Will Be Doing As the Aeronautical Engineer - MRB you will be responsible for overseeing the timely and economical disposition of non‑conforming parts and hardware, ensuring minimal impact on operations and delivery schedules. Your responsibilities will include: Recognize pertinent design factors relating to structural analysis, interchangeability, maintainability, effective use and operation, and other contractual specification requirements. Support aircraft production and provide rapid response in support of worldwide operations. Participate in anomaly investigation, technical solution development, and coordination with multiple support organizations and government customers. Provide awareness regarding errors related to released engineering and manufacturing Build‑to‑Packages. Hands‑on evaluation of non‑conformances on aircraft...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Manufacturing Engineer (ME) - Level 2 for the Manufacturing Engineering team which is responsible for designing and optimizing production processes, equipment, and material‑handling solutions. What You Will Be Doing As the Manufacturing Engineer (ME) - Level 2 you will be responsible for creating efficient manufacturing layouts, improving machine utilization, and ensuring product quality through data‑driven methods. Your responsibilities will include: Design manufacturing processes, procedures, and floor layouts for assemblies, equipment installation, and material handling. Optimize machine arrangements and develop operation sequences to maximize efficiency and productivity. Specify tooling and equipment requirements, incorporate inspection and test criteria, and advise on statistical process control integration. Evaluate machinery performance, initiate corrective actions, and provide design input to engineering for...

Description: We are Lockheed Martin You will be a C-130J Production/Training Pilot for the C-130 Flight Operations team. Our team is responsible for conducting acceptance check flights of newly assembled C-130J aircraft. We are where the “Rubber meets the Road” for all new C-130J aircraft and capabilities coming out of our Marietta plant. What You Will Be Doing As the Production/Training Pilot your responsibilities will include: • Pilot C-130J aircraft during production acceptance and functional check flights • Pilot C-130J aircraft on delivery and ferry flights • Pilot C-130J aircraft for engineering and experimental test flights to validate and verify compliance with FARs and military specifications, determine operational suitability, and conduct developmental test • Perform as a C-130J instructor pilot for company and customer pilots and aircrew during syllabus training flights • Provide classroom, simulator, and flight instruction for company and customer aircrew •...

Description: You will be the Test Engineer Staff for the AMMM Functional Test Engineering Team in Marietta, GA, which is responsible for supporting multiple areas within manufacturing operations. What You Will Be Doing As the Test Engineer Staff, you will be responsible for designing, developing, operating, maintaining, and documenting software and firmware components and computing systems software to meet engineering and manufacturing requirements. Your responsibilities will include: Writing and revising C-130J aircraft system/component test procedures and providing on-aircraft testing and troubleshooting support. Developing test equipment and providing test equipment designs, as well as supporting Test Labs and Component testing within the Labs. Creating Labview, C++, & Visual Basic test programs for analyzing & validating the 1553 data bus systems. Developing and maintaining production planning (SFM, CAPPS, IMPACTS) and providing Functional...

Description: We are Lockheed Martin This position will work in Quality Control in Marietta, GA, to support all aspects of the C-130J build cycle to include assembly, structural repairs on sub or major assemblies, and functional checks. • This position is responsible for ensuring QA policies, procedures, and practices are followed and executed correctly to company and regulatory standards • Initiates, reviews, analyzes, and reports on quality-related data/metrics from production, service, supplier, or process improvement activities and analyzes using statistical techniques • Interfaces as needed with manufacturing, engineering, customer, vendor, and subcontractor representatives to ensure process requirements are met • Facilitate customer presentations for Mandatory Government Inspections (MGI) and/or Safety of Flight activities (SOF) • Conduct surveillance audits for compliance to the C-130 Quality Management System • Responsible for developing and coordinating defect...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...