8 lead test engineer jobs found

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques...

Description: You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools. What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. What’s In It For You: 3 day weekends every weekend! Candidate must be able to work a 4x10B Tue -Fri From onsite to remote, we...

Description: You will be the Production Hangar Avionics F-16 Technician for the Lockheed Martin Greenville Production Team. Our team is responsible for production line, installs of electrical harnesses/wires, continuity testing, and soldering/termination operations. What You Will Be Doing As the Production Hangar Avionics F-16 Technician you will be responsible for installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat,...

Description: You will be the Production Flightline Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Flightline Team. Our team is responsible for Final flight ops and delivery to include flight operations, installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline Avionics, F-16 Technician Lvl 3 you will be responsible for Flight Operations, Launch and Recovery, Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend...

Description: You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. The Production Flightline APG, F-16 Technician Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include: • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery The candidate will be required to: • Comprehend documents such as safety rules, operating l be required to be a member of the...

Description: You will be the Production Hangar, F-16 Tech Lvl 3 Multi-Shift for the Lockheed Martin Greenville Production Team. Our team is responsible for flightline maintenance, troubleshooting, and aircraft delivery to our customers. What You Will Be Doing As the Production Hangar, F-16 Fuels Tech Lvl 3 you will be responsible for performing removal, installation, and inspection functions of F-16 aircraft wings and fuel cells in addition to assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft. Diagnoses results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommends corrective action necessary to correct deficiencies. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop,...

Description: You will be the Sustainment Avionics, F-16 Technician Level 3- First Shift for the Lockheed Martin Greenville Sustainment Team. Our team is responsible for Flight test/Depo functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the Sustainment Avionics, F-16 Technician Level 3 you will be responsible for Flight test Mods, testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks to ensure flight readiness. You may also be required to troubleshoot and repairing electrical and avionics systems based on area team. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle,...