29 manufacturing engineer stf jobs found

Description: What You Will Be Doing Position will be at the technical forefront of all F35 Engineering Change Requests (CRs) that impact Production operations across all Domestic Sites. As a Manufacturing Engineer Stf supporting the F-35 Domestic Change Integration Manufacturing Engineering (ME) team, you will be responsible for all CRs processed through the CR lifecycle, serving as one of the primary contacts within Production Engineering providing coordination between various functions to ensure engineering changes can be broken in effectively while remaining within cost and schedule constraints. • Provide technical solutions for a wide range of difficult problems using solutions that are imaginative, thorough, practical and consistent with organization objectives. • Provide technical integration and communicate solutions to support build, training, test and troubleshooting for all manufacturing processes and system check out procedures. • Review and aid the co-producer...

Description: You will be the Manufacturing Engineer Stf - CNC Machining for the Manufacturing team. Our team is responsible for delivering high‑quality machined components that meet rigorous engineering and customer requirements. What You Will Be Doing As the Manufacturing Engineer Stf - CNC Machining you will be responsible for creating, revising, and validating CNC machining programs that drive efficient, repeatable production. Your responsibilities will include, but are not limited to: Develop and revise CNC machining programs to meet engineering, quality, and efficiency standards. Verify programs through prove‑outs on production machines and ensure proper work‑holding and tooling specifications. Create and update manufacturing work instructions while troubleshooting production issues on the shop floor. Train machine operators and support acquisition/installation of new equipment to enable rate increases and continuous improvement. Why Join...

Description: The F-35 is designed with the entire battlespace in mind, bringing new flexibility and capability to the United States and its allies. Reliance on any single capability — electronic attack, stealth, etc. — is not sufficient for success and survivability in the future. Missions traditionally performed by specialized aircraft — air-to-air combat, air-to, ground strikes, electronic attack, intelligence, surveillance and reconnaissance — can now be executed by a squadron of F-35s. F35 Aircraft Mate/ Forward Fuselage Manufacturing Engineering Stf will directly support primarily the production team. What You Will Be Doing Selected Candidate will be required to: • Perform floor support to solve immediate production constraints. • Develop corrective actions to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU). • Update the manufacturing plan • Perform manufacturing evaluations of engineering changes • Perform QAR...

Description: The mission matters. So do the people behind it. With advancing defense technology at our core, what sets us apart is a culture of collaboration, purpose, and impact. What is the mission? Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. ✪ Who we are: We are a dynamic team at the cutting edge of National Security Space dedicated to developing innovative technologies that address the most unique and pressing customer challenges. Our collaborative culture fosters creativity, teamwork, and the pursuit of excellence for our programs and our suppliers. ✪ Why join us: This is an opportunity to be at the forefront of managing critical partnerships for key discriminating deliverables that drive the success of a quickly growing...

Description: You will be the Industrial Engineer Stf for the Missiles and Fire Control team. Our team is responsible for analyzing and improving manufacturing processes, implementing lean practices, and ensuring optimal efficiency in our operations. What You Will Be Doing Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities. Why...

Description: The ADP team is looking for a Stf Fabrication Manufacturing Engineer to join our team in Palmdale, CA! What You Will Be Doing Lead small teams to ensure production needs are met and discrete deliverables are completed ahead of need. Conduct critical design reviews and collaborate with cross-functional teams to ensure alignment with manufacturing processes. Develop assembly plans and innovative solutions to address daily challenges, ensuring efficient production flow. Create and maintain detailed manufacturing products and documentation. Provide direct support on the production floor, troubleshooting issues and implementing solutions. Utilize Product Lifecycle Management (PLM) and Manufacturing Execution Systems (MES) to develop manufacturing processes. Interpret drawings and model-based designs, translating them into actionable steps for manufacturability for the production environment. Collaborate with team members to explore out-of-the-box thinking and...

Description: You will be the Industrial Engineer Sr Stf (Level 5) for the Core Industrial Engineering Team. Our team is responsible for supporting 1LMX preparation and execution, leading engineering standardization across facilities, and owning roadmaps for digital integration. What You Will Be Doing As the Industrial Engineer Sr Stf (Level 5) you will be responsible for delivering high‑impact engineering solutions that enable efficient manufacturing operations. Your responsibilities will include, but are not limited to: Support all Industrial Engineering activities related to 1LMX preparation and execution. Lead standardization of time standards, Lean Six Sigma, layout optimization, and data governance across manufacturing facilities. Develop and maintain roadmaps and execution plans for engineering standardization and digital integration. Collaborate with cross‑functional teams to drive continuous improvement and ensure data integrity. Why...

Description: You will be the Industrial Engineer Stf (Level 4) for the MFC Enterprise Industrial Engineering team. Our team is responsible for applying advanced analytical skills and Industrial Engineering concepts to support IAMD Production Operations Management. What You Will Be Doing As the Industrial Engineer Stf (Level 4) you will be responsible for driving operational excellence through advanced analysis, model development, and cross‑functional collaboration. Your responsibilities will include, but are not limited to: Develop and maintain simulation and analytical models for production operations. Analyze performance data to identify bottlenecks and improvement opportunities. Support capacity planning and forecasting for IAMD production lines. Collaborate with engineering, logistics, and program teams to integrate model insights. Prepare technical reports and presentations for senior leadership. Why Join Us The ideal candidate is a...

Description: The Fleet Ballistic Missile Avionics team is seeking an experienced Electromechanical Harness Engineer who will lead a team of engineers in the development of 3D concept models of space flight avionics Cable and Harnessing and ultimately advance them for flight use. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton or Englewood CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Lead trade studies on cable and harness design approaches and provide technical data for informal and formal design review documentation and presentations. • Provide leadership on a fast paced team from requirements through development and production. • Be responsible to assure coordination between functional groups during the product development life cycle. • Communicate technical status and issues internally to program leadership, technical...

Description: The Fleet Ballistic Missile Avionics team is seeking an experienced Electronics Packaging Engineer who will work closely with senior engineers to develop preliminary 3D concept models of space flight avionics hardware and ultimately advance them for flight use. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton or Englewood CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Support trade studies on electronic enclosure design approaches and will provide technical data for informal and formal design review documentation and presentations. • Coordinate with thermal, dynamic, stress, reliability, EMC, and survivability analyses to assure compliant designs. • Support manufacturing and test disciplines in minimizing cycle time and resolving problems. • Establish specifications for contract assemblers and raw-material vendors....

Description: The Fleet Ballistic Missile Avionics team is seeking an experienced Electronics Packaging Engineer who will work closely with senior engineers to develop preliminary 3D concept models of space flight avionics hardware and ultimately advance them for flight use. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton or Englewood CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? • Support trade studies on electronic enclosure design approaches and will provide technical data for informal and formal design review documentation and presentations. • Coordinate with thermal, dynamic, stress, reliability, EMC, and survivability analyses to assure compliant designs. You will support manufacturing and test disciplines in minimizing cycle time and resolving electronic packaging problems. • Establish specifications for contract...

Position Summary Odyssey Systems is recruiting to fill a FMS Systems Engineer position supporting the ISR Sensors Division (AFLCMC/WIN), at Wright Patterson AFB, OH. WIN is part of the ISR/SOF Directorate (AFLCMC/WI), who is responsible for equipping our warfighters to win the fight. The Directorate executes a $22 billion acquisition portfolio developing, producing, testing, modifying, fielding, and supporting Air Force ISR and SOF platforms, and related sub-systems.   Program description:   The ISR/SOF Directorate has the collective Air Force Materiel Command (AFMC) mission responsibility for equipping ISR & SOF warfighters to dominate the battlespace. Applicants will benefit from competitive salaries, career growth, and a unique ability to positively impact national security on a global scale!   Responsibilities Duties include, but not limited to:  Possess the advanced knowledge, experience, and...

Position Summary Odyssey has an exciting opportunity for a Journeyman Avionics Engineer , supporting the Fixed Wing Modification Branch AFLCMC/WIU. This program focuses on modification and sustainment support for SOF/PR and ISR fixed wing and rotary‑wing aircraft. The branch plans, integrates, modifies, and sustains SOF/PR variants of the C‑130J fleet (MC‑130J, HC‑130J, LC‑130J and special mission configurations) to keep platforms modern, survivable, and mission‑ready. Responsibilities Duties include, but not limited to:  Apply DoDD 5000‑series guidance and AFMC/AFLCMC engineering policies to SOF acquisition engineering activities. Support development and analysis of system and subsystem requirements, translating them into design criteria and system specifications. Conduct technical planning, system integration analyses, trade studies, and risk assessments across weapon system platforms. Assist in developing...

Description: You will be the Quality Engineer for the Quality Engineering Team. Our team is responsible for ensuring product excellence through rigorous audits, root‑cause analysis, and continuous improvement. What You Will Be Doing As the Quality Engineer you will be responsible for interfacing with multiple functional areas, investigating non‑conformance issues, and leading quality audits. Your responsibilities will include, but are not limited to: Interface with Production, Program Quality Engineering, and Manufacturing Engineering personnel. Investigate non‑conformance issues and develop root‑cause corrective actions. Conduct Hardware Quality Audits (HQAs) and Foreign Object Elimination (FOE) walk‑downs. Perform product, process, and surveillance audits to identify improvement opportunities. Implement corrective and preventive measures based on audit findings. Why Join Us The ideal candidate is collaborative, detail‑oriented, and...

Description: In this role, the employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions. This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists. All of this data will need to be put in the SOF CLSS systems of record, SAP and Teamcenter. Will be required to interpret input from program Production Engineers to provide production support during fabrication. Why Join Us This position supports our Special Operations Forces – Global Logistics Support Services contract, which is the U.S. Special Operations Command's (USSOCOM) largest service contract vehicle providing a wide range of tailored logistics, maintenance, and sustainment services. Learn more here: SOF GLSS Further Information About This Opportunity: This position is in Lexington. Discover more about our Lexington, Kentucky location. MUST BE A U.S. CITIZEN – This position is located...

Description: You will be a Safety Compliance Engineer with Lockheed Martin Missiles and Fire Control manufacturing facility in Troy, Alabama. Here, you will become a member of a dynamic Environmental, Safety, and Health team supporting all programs at the Troy site. What You Will Be Doing As a Safety Compliance Engineer, you will analyze accident and injury data to develop mitigation strategies, ensuring adherence to safety regulations and safeguarding employees from potential hazards. Your responsibilities will include, but are not limited to: Conducting compliance assessments to verify adherence to safety standards and procedures. Collaborating with cross-functional teams to implement ergonomic tools and practices within manufacturing operations. Developing job hazard analyses and risk assessments to support manufacturing processes. Conducting incident investigations with recommended corrective actions. Applying relevant standards such as DOD,...

Description: Join us at Lockheed Martin as an Electro-Mechanical Packaging Engineer where you will have responsibilities for electronics packaging development including mechanical design, stress and thermal analysis, an electronics and mechanical CAD (drawing development and release). Location: This position does not support teleworking ;the selected candidate will be located near our Lockheed Martin Space facility in either: • Englewood CO (Relocation assistance available) • Cape Canaveral FL (*No relocation assistance for this location) You are expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? As an Electro-Mechanical Packaging Engineer within the Fleet Ballistic Missile (FBM) Avionics team, you will be the technical lead for all Electro-Mechanical items within the Avionics Portfolio. Tasks include: • Sustaining the current deployed weapon system ensuring continued credibility and availability of our nation’s...

Description: You will be the Associate Quality Engineer for the Quality Engineering team. Our team is responsible for supporting program and functional quality, interfacing with Production, Program Quality Engineering, and Manufacturing Engineering personnel, and driving continuous improvement through audits and corrective actions. What You Will Be Doing As the Associate Quality Engineer you will be responsible for ensuring product and process excellence, leading root‑cause investigations, and championing quality improvements across the program. Your responsibilities will include, but are not limited to: Interface with Production, Program Quality Engineering, and Manufacturing Engineering teams. Investigate non‑conformance issues and develop corrective actions. Conduct hardware quality audits, FOE walk‑downs, and surveillance assessments. Lead root‑cause analysis and implement preventive measures. Support continuous improvement through audits and...

Description: You will be the Tool Engineer Senior / Tool Design / GD&T for the Pike County Operations (PCO) team. Our team is responsible for creating innovative solutions to manufacture missile components and final assemblies, ensuring compliance with government regulations and company requirements. What You Will Be Doing As the Senior Tool Designer, you will be responsible for collaborating with cross‑functional teams to design, fabricate, and implement special tools and fixtures, utilizing CAD software such as PTC Creo and CATIA V5. You will create detailed tool design CAD models and drawings, and provide shop‑floor support to resolve technical and manufacturing issues. Your responsibilities will include, but are not limited to: Collaborating with missile designers, production operations, and stakeholders to conceptualize and design special tools and fixtures Creating detailed tool design CAD models and drawings using PTC Creo and CATIA V5...

Description: You will be the Quality Engineer for the Quality Assurance team. Our team is responsible for implementing and developing quality principles to ensure the highest standards of product and process quality. What You Will Be Doing As the Quality Engineer you will be responsible for investigating non‑conformance issues, driving continuous improvement, and partnering with cross‑functional teams to embed quality standards. Your responsibilities will include, but are not limited to: Interface with Production, Program Quality Engineering, and Manufacturing Engineering personnel. Investigate and resolve non‑conformance issues through root‑cause analysis and corrective action. Conduct audits, assessments, and technical evaluations to verify compliance with quality standards. Collaborate with program management, engineering, supply chain, and customers on quality‑related matters. Develop and implement strategies to improve internal and supplier...