17 circuit card design engineer jobs found in Grand Prairie, TX

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control (MFC) – Next Gen Short Range Interceptor (NGSRI) team. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems running reliably in harsh, radiation rich environments. What You Will Be Doing As the Circuit Card Design Engineer you will lead the architecture, schematic capture, and layout of multiple circuit card assemblies for the NGSRI Guidance Electronic Components Assembly (GECA). You will partner with cross functional engineers to drive designs through the Design Assurance process, from concept through procurement and test. Your responsibilities will include: • Developing and refining system, performance, interface, and environmental requirements for GECA circuit cards. • Capturing schematics and coordinating with EPCAD for layout and signal routing optimization. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Indirect Fire Protection Capability Inc 2 (IFPC2) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface requirements • Supporting development of multiple circuit card assemblies • Managing...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout on program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface requirements • Supporting development of multiple circuit card assemblies • Managing bill of materials, part sourcing, and build-up...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. IAMD-AP is seeking an Electronic Warfare (EW) RF Payload Design Engineer to support advanced EW decoy system development. What You Will Be Doing The role will drive RF architecture, design, integration, test, and verification for EW payloads that must operate in hostile, spectrum congested environments while supporting tactical Link 16, M code GPS, and navy blue force requirements. This is a significant effort that will develop, integrate and fly multiple EW RF payloads simultaneously for various customer including ONR, USN IWS 2.0, and internal IRAD activities. The candidate shall operate as a...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin is seeking a Manufacturing Engineering Associate for a position in Grand Prairie, TX to join the Missiles and Fire Control Manufacturing Engineering team supporting the Circuit Card Assembly Electrical Operations. The sustainment...

Description: You will be the Electrical Engineer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. What You Will Be Doing As the Electrical Engineer you will lead technical coordination and oversight of subsystem suppliers, translating prime contract requirements into clear guidance for our supply base. You will be responsible for developing system level architecture, defining interfaces for subsystems for the Direct Support Fires Technology (DSFT) rockets. Your responsibilities will include: • Providing technical leadership and guidance to subsystem suppliers and ensuring contract requirements flow accurately to them. • Owning the disposition of hardware through Material Review Board Engineer (MRBE) processes as required. • Participating in weekly supplier meetings, communicating issues and status to program leadership, Lockheed...

Description: You will be the Electrical Engineer for the Missiles & Fire Control (MFC) team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will lead technical coordination and oversight of subsystem suppliers, translating prime contract requirements into clear guidance for the supply base. You will own your assigned subsystem, drive issues to resolution and support the production line. Your responsibilities will include: • Providing technical leadership and guidance to subsystem suppliers and ensuring contract requirements flow accurately to them. • Owning the disposition of hardware through Material Review Board Engineer (MRBE) processes and supporting rocket production. • Leading weekly supplier meetings, communicating issues and status to program leadership, Lockheed Martin and government customers. • Evaluating...

Description: We are seeking a highly experienced Staff Electrical Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 7 - 12 years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf (COTS)...

Description: You will be the Mechanical Engineer - Level 4 for the Electronic Hardware Design (EHD) team which is responsible for developing flight‑worthy, safety‑critical electronic hardware. What You Will Be Doing As the Mechanical Engineer - Level 3 you will be responsible for delivering robust mechanical solutions that enable the EHD team’s mission‑critical hardware to perform flawlessly in aerospace environments. Your responsibilities will include: Design and analyze mechanical components for flight‑critical electronic hardware. Collaborate with electrical engineers to integrate mechanical and electronic subsystems. Conduct tolerance analysis, stress testing, and validation of hardware assemblies. Generate detailed CAD models and engineering drawings that meet aerospace standards. Support prototype build, test, and troubleshooting activities. What’s In It For You We are committed to supporting your work‑life balance and overall...

Description: The Electrical Capability - Project Engineer working in supply chain is the technical authority for evaluating, selecting, and developing external electrical component suppliers that produce Circuit Card Assemblies (CCAs), Printed Wire Boards (PWBs), and cable/wire harnesses. The role blends deep electrical manufacturing expertise with strong business acumen to translate capability data into strategic sourcing decisions that drive cost reduction, risk mitigation, and program competitiveness. The engineer partners closely with Supply Chain, Strategic Sourcing, Supplier Quality, and Operations to assess supplier capabilities, resolve technical issues, and ensure that suppliers meet quality, delivery, and performance requirements throughout the product lifecycle. ________________________________________ Key Responsibilities Supplier Technical Evaluation & Selection o Lead technical assessments of electrical suppliers, covering: o CCA assembly processes (SMT,...

Description: At Lockheed Martin Aeronautics we are committed to shaping the future of aviation! Our Aeronautics Global Supply Chain team is passionate about delivering innovative, affordable, and agile solutions that exceed our customer’s expectations. The team touches every product and service we deliver and enables our customers to do the impossible every day. At Aeronautics, we leverage problem solving, creativity, and data to tackle the most exciting challenges in the industry. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. You have arrived at your career destination! Join us! Who You Are In this role you'll perform as a Procurement Engineer on the Global Supply Chain Team. What You Will Be Doing This position works with Global Supply Chain teams, Program and Subcontract Program Managers, Technical Subcontract Managers (TSM), Supplier Quality, Design engineering and others to identify supply chain...

Description: You will be the Manufacturing Robotics Automation Engineer for the Lufkin Automated Engineering team. Our team is tasked with the design and implementation of automation and robotics solutions for Lufkin Missiles and Fire Control. What You Will Be Doing As a Manufacturing Robotics Automation Engineer, you will be responsible for providing manufacturing guidelines production cycles to ensure integration of automated solutions during manufacturing phases. Your responsibilities will include: • Supporting and participating in the assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems, and other production equipment. • Support Research and Development (IRAD) projects related to automation and robotics technologies. • Working with engineering and manufacturing roles to understand requirements and manufacturing processes for which automation tools can be...

Description: You will be the Manufacturing Robotics Automation Engineer for the Lufkin Automated Engineering team. Our team is tasked with the design and implementation of automation and robotics solutions for Lufkin Missiles and Fire Control. What You Will Be Doing As a Manufacturing Robotics Automation Engineer, you will be responsible for providing manufacturing guidelines production cycles to ensure integration of automated solutions during manufacturing phases. Your responsibilities will include: • Supporting and participating in the assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems, and other production equipment. • Support Research and Development (IRAD) projects related to automation and robotics technologies. • Working with engineering and manufacturing roles to understand requirements and manufacturing processes for which automation tools can be...

Description: You will be a Lead Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor missiles, including processor boards and interface board designs. What You Will Be Doing As a Lead Circuit Card Designer, you will be responsible for leading design and development of circuit card designs for cutting edge systems. You will work closely with your team and electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Leading the design and development of circuit card designs for cutting edge systems • Collaborating with electronic packaging engineers and systems engineers • Leading design, build, and integration of bread board and brass board designs to fit the desired form factor • Working in a lab environment to test, evaluate, and integrate board designs • Utilizing schematic capture and board...

Description: You will be the ElectroMechanical Engineer Lead for the Integrated Fires Protection Capability 2 Interceptor (IFPC 2) program. Our team designs, builds, and tests next generation interceptors for the Integrated Air and Missile Defense (IAMD) portfolio, delivering critical capabilities to protect our nation and allies. What You Will Be Doing As the ElectroMechanical Engineer Lead you will package new circuit cards, rigid flex assemblies, and round wire harness bundles for both the interceptor and its Mission Critical Interface (MIC). You will partner with procurement, model shop, and external vendors to ensure every electronic assembly is built to exacting standards and delivered on schedule. Your responsibilities will include: • Generating system interconnect diagrams in Zuken and creating model based harness designs. • Producing detailed mechanical layouts, drawings, and Bills of Materials that specify materials, components, and manufacturing processes. •...

Description: What You Will Be Doing As a Facilities Engineer you will be responsible for: • Under general supervision of the Team Lead, determines and develops approach in managing High and Low Voltage Infrastructure projects for advanced aeronautical manufacturing plant; • Monitors all phases of construction including design, compliance, construction, occupancy and quality control; • Understanding and wide application of technical principles, theories and concepts in the field; • Knowledge of design codes and standards, such as NEC, NESC, NEMA, IEEE, ANSI, IESNA and UFC’s; Ability to develop a list of codes criteria (Code Audit) to be reflected in the projects; • Manage and administrate Corporate capital, Overhead and Government-funded infrastructure projects budgets; • Perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams); • Develop Statements of Work, cost estimates and budgets, timelines and...