25 manufacturing jobs found in Greenville, SC

Description: You will be the Manufacturing Support Team Member - Level 2 for the F-16 Block 70 Manufacturing Support Team for the Mate section of the build which is responsible for... What You Will Be Doing As the Manufacturing Support Team Member - Level 2 you will be responsible for providing hands‑on support to the F‑16 Block 70 manufacturing operation, ensuring smooth day‑to‑day workflow and product quality. Your responsibilities will include: Assist technicians with the assembly, testing, and repair of F‑16 Block 70 components. Maintain accurate configuration baselines, inventory records, and work‑order documentation. Coordinate with suppliers and internal customers to schedule procurements, calibrations, and repairs. Support compliance with safety procedures, quality standards, and plant policies. Identify improvement opportunities and contribute to continuous‑improvement activities. What’s In It For You We are committed to...

Description: You will be the Manufacturing Support Team Member - Level 3 for the F-16 Block 70 Manufacturing Support Team which is responsible for... What You Will Be Doing As the Manufacturing Support Team Member - Level 3 you will be responsible for supporting production processes in a team‑based manufacturing environment, delivering on‑the‑job training, assessment, and certification for electrical and structural assembly. Your responsibilities will include: Observe, assess, and train personnel on‑the‑job in electrical and structural assembly procedures. Component installation and operational check out. Identify and recommend corrective actions for any deficient assembly processes or skill gaps. Support corrective‑action investigations, root‑cause analysis, and implement process improvements. Maintain 6S/lean practices within your area of responsibility. Act as supervisor during supervisor absences, build work plans, and set daily...

Description: You will be the Manufacturing Engineer - Level 2 for the F‑16 Mate team which is responsible for supporting all phases of the F‑16 platform’s manufacturing plan, production stand‑up, and post‑delivery sustainment. What You Will Be Doing As the Manufacturing Engineer - Level 2 you will be responsible for integrating engineering, shop‑floor, and quality inputs to ensure efficient aircraft production. Your responsibilities will include: Develop and maintain detailed manufacturing plans and process documentation for the F‑16 platform. Collaborate with shop‑floor personnel, design engineering, quality, and industrial engineering to resolve production issues. Support corrective‑action initiatives and continuous‑improvement projects on the production line. Assist in the planning and execution of post‑delivery sustainment and modification activities. Provide technical guidance and training to operators to improve process reliability and...

Description: Manufacturing Planner- Junior Level Location: Greenville SC What You Will Be Doing Are you a detail-oriented professional with a knack for optimizing production processes? We are seeking a Manufacturing Planner in Greenville, SC, to oversee the management of production and non-production parts and commodities, ensuring smooth and efficient operations. Key Responsibilities - Oversee and manage the production and non-production parts and commodities assigned to ensure efficient use and inventory control - Enter and maintain Material Requirements Planning (MRP) parameters into SAP, including updating material master data to support accurate planning and scheduling - Evaluate order signals for both dependent and independent requirements to maintain appropriate inventory levels and ensure material availability - Review and resolve discrepancies and exceptions in orders, implementing corrective actions as necessary to maintain smooth operations - Release...

Description: What You Will Be Doing As the Tooling Services Supervisor, you'll play a vital role in supporting aircraft sustainment, production, and other Tooling Services functions within a collaborative team environment. You'll interface with multiple cross-functional organizations to address issues or constraints in aircraft sustainment and production, ensuring process integrity across Safety, Quality, Schedule, and Cost parameters. This position offers an exciting opportunity to lead a team and drive operational excellence in a dynamic aerospace environment. Key Responsibilities - Support aircraft sustainment, production, and Tooling Services functions. - Interface with cross-functional organizations to resolve issues. - Establish expectations for task completion to meet schedule performance goals. - Manage performance metrics for sustainment, production, and special projects. - Oversee the use and disposal of hazardous materials and personal protective equipment...

Description: This position will be located at Amendola Air Base, Italy. The successful candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) team's technical interface to the on-site customer (Operations and Maintenance) in resolving issues arising from maintenance or modification activities for all matters dealing with the F-35 aircraft. As a Nose to Tail (NTT) FSE, the preferred candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is also desired that the individual be an emerging authority in Vehicle Systems / APG (VS), and Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, and SLO. What You Will Be Doing Responsibilities include: • Accomplish troubleshooting and analysis of difficulties experienced in the field. • Attend debriefings, to aid in the rapid identification of emerging issues that require company intervention to avoid aircraft...

Description: You will be the F-16 Build Team, Production APG Lead for the Lockheed Martin Greenville Team. Our team is responsible for installing Fuel and Hydraulic Systems in the center section of the aircraft. What You Will Be Doing The Production Lead will be responsible for providing status of work documents and work accomplished in their work area. The candidate will be the intermediary between the aircraft assembly crew and production supervision while assisting other mechanics with day-to-day activities. The Production Lead will be considered a working lead that will maintain certifications and qualifications to perform production tasks as required to complete tasks on the product, as well as other associated duties: -Open/Close toolboxes by verifying accurate inventory of tools and documenting applicable logs along with any additional taskings assigned by the supervisor. -Ensure team members have properly put away tools, parts and consumables at end of shift....

Description: You will be a Tool Room Attendant Located at our Lockheed Martin Greenville, South Carolina Facility. Our team is responsible for providing specialized tooling and support equipment. What You Will Be Doing As the Tool Room Attendant you will be responsible for Receiving, storing, and issuing hand tools, machine tools, and testing equipment by utilizing AMCS, a computer based program, to manage the assets in the tool room. The Tool Room Attendant will also be responsible for the below listed secondary duties: • Preform annual inspections and inventories of the tools and test equipment assigned to the tool room. • Locate lost or misplaced tools and equipment. • Submit portable tool request (PTR) and tool repair tickets (TRT) at the technicians request. • Retrieve and deliver calibrated items to their assigned location either manually or using hand truck. May mark and identify tools and equipment, using identification tag, stamp, or electric marking tool. •...

Description: You will be the Production Structures/Assembler, F16 Technician for the Lockheed Martin Greenville Production Team. Our team is responsible for Production build, repair and delivery of F-16 aircraft to our customers. What You Will Be Doing As the Production Structures/Assembler, F16 Technician you will be responsible for interpreting blueprints, lays out, fabricates, assembles, installs and repairs various sheet metal and structural assemblies and sub-assemblies for F16 aircraft utilizing precision measuring equipment. The Production Structures/Assembler, F16 Technician Technician will also need to be knowledgeable in aircraft structural assembly operation and maintenance to include: • Precision Drilling/Reaming • Riveting/installation of various fasteners The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and...

Description: You will be a F-16 Production Lead supporting our Greenville Site. What You Will Be Doing As a Production Lead you will be responsible for providing status of work documents and work accomplished in your area. The candidate will be the intermediary between the aircraft assembly crew and production supervision while assisting other mechanics with day-to-day activities. The production lead will be considered a working lead that will maintain certifications and qualifications to perform production tasks as required to complete tasks on the product, as well as other associated duties: -Open/Close toolboxes by verifying accurate inventory of tools and documenting applicable logs along with any additional taskings assigned by the supervisor. -Ensure team members have properly put away tools, parts, and consumables at end of shift. -Assist supervisors with product discipline, housekeeping, HAZMAT accountability and 6S lean manufacturing initiatives/compliance....

Description: You will be the F-16 Build Team, Production Fuel Tank Sealant Lead for the Lockheed Martin Greenville Team. Our team is responsible for sealing fuel tanks in the center section of the aircraft. What You Will Be Doing The Production Lead will be responsible for providing status of work documents and work accomplished in their work area. The candidate will be the intermediary between the aircraft assembly crew and production supervision while assisting other mechanics with day-to-day activities. The Production Lead will be considered a working lead that will maintain certifications and qualifications to perform production tasks as required to complete tasks on the product, as well as other associated duties: -Open/Close toolboxes by verifying accurate inventory of tools and documenting applicable logs along with any additional taskings assigned by the supervisor. -Ensure team members have properly put away tools, parts and consumables at end of shift. -Assist...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Field Service Engineer (FSE) to support the Argentina Air Force (FAA) at Rio Cuarto Air Base, Cordoba Province, Argentina. Note: This position is located in Argentina and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration,...

Description: - This position is part of the LM Aero Supplier Quality Management (SQM) team, within the LM Aero Quality & Mission Success (Q&MS) organization, and is responsible for supply chain sourced product quality. - The selected Quality Engineer for this role will report to the Integrated Fight Group - Supplier Quality Integration (IFG-SQI) team which functions as the integration and interface point between SQM fielded personnel, suppliers, Co-Producers, program stakeholders (including supply chain, production & operations, quality, engineering, and program management) as well as customers (DCMA and Program Office), providing technical/process expertise and facilitation towards risk/impact mitigation and issue resolution. - This position will utilize Quality Science tools and processes to ensure quality at source, material availability, and mitigate/eliminate/prevent disruptions to Production and Sustainment. - This position will collaborate between various...

Description: You will be the Flight Line Operations Supervisor - Level 3 for the Flight Line Operations team which is responsible for... What You Will Be Doing As the Flight Line Operations Supervisor - Level 3 you will be responsible for leading a skilled team that maintains and services legacy aircraft on the flight line while ensuring safety, regulatory compliance, and operational excellence. Your responsibilities will include: Supervise specific aircraft manufacturing areas, enforcing safety standards, regulatory requirements, and company policies. Set priorities and allocate resources to meet production schedules with focus on quality, cost‑effectiveness, and timeliness. Provide leadership and guidance to Flight Line technicians, conduct performance evaluations, and nurture a culture of teamwork and high performance. Oversee employee training programs and ensure adherence to all policies, procedures, and ethical standards. Act as the primary...

Description: You will be the Completion Supervisor - Level 3 for the F‑16 Production Completion team. Our team is responsible for overseeing interior completion of F‑16V Block 70 aircraft. What You Will Be Doing As the Completion Supervisor - Level 3 you will be responsible for leading the interior‑completion effort on the F‑16V Block 70 platform. Your responsibilities will include, but are not limited to: Directing a skilled crew of technicians to install and verify interior components. Ensuring all work complies with engineering specifications and quality standards. Coordinating schedules and resources to meet production milestones. Conducting inspections and resolving non‑conformances promptly. Collaborating with engineering and supply‑chain partners to drive continuous improvement. Why Join Us The ideal candidate is a collaborative leader who thrives in a fast‑paced, mission‑critical environment. This role offers the chance to shape...

Description: You will be a Tool Room Attendant Located at our Lockheed Martin Greenville, South Carolina Facility. Our team is responsible for providing specialized tooling and support equipment. What You Will Be Doing As the Tool Room Attendant you will be responsible for Receiving, storing, and issuing hand tools, machine tools, and testing equipment by utilizing AMCS, a computer based program, to manage the assets in the tool room. The Tool Room Attendant will also be responsible for the below listed secondary duties: • Preform annual inspections and inventories of the tools and test equipment assigned to the tool room. • Locate lost or misplaced tools and equipment. • Submit portable tool request (PTR) and tool repair tickets (TRT) at the technicians request. • Retrieve and deliver calibrated items to their assigned location either manually or using hand truck. May mark and identify tools and equipment, using identification tag, stamp, or electric marking tool....

Description: Liaison Engineer Stf - Level 4 Location: Greenville SC What You Will Be Doing As a Liaison Engineer supporting the sustainment engineering team in Greenville, SC, you will play a critical role in supporting F-16 and C-130 MMRO (Maintenance, Modification, Repair, and Overhaul) activities. You will serve as a key link between engineering, production, and customer teams, ensuring timely and effective resolution of technical issues to support aircraft delivery schedules. In this role, you will provide hands-on engineering support for aircraft modifications, working closely with Aircraft Technicians on the production floor to address real-time challenges. You will review and validate planning work instructions, evaluate aircraft damage discrepancies, and research repair solutions using USAF and NAVAIR Technical Orders (TOs). You will collaborate with customers and OEM design engineering teams to coordinate repair authorizations and develop compliant repair...

Description: You will be the Material Handler for the Warehouse. Our team is responsible for supplying build material and hardware to support F-16 production and/or sustainment operations. What You Will Be Doing As the Material Handler you will be responsible for but not limited to the following tasks: - Performing warehouse receiving, put away, picking or delivery operations for required material to support production and sustainment operations. - Performing required cycle counts of material and help maintain inventory accuracy. - Must have a valid State issued Driver’s License. - Must be able to stand and walk during the majority of work shift. - Must be able to operate warehouse machinery, to include Order Picker, Fork Lift, Reach Truck - Must be able to lift up to 25 lbs occasionally. - Must maintain clean work environment and required cleanup at end of shift. - Assists with other duties as required by Warehouse Leadership Team. What’s In It For You: 3 day...

Description: You will be a member of the Greenville Production Planning organization in support of the F-16 production line. The Production Planning department is responsible for writing and maintaining work instructions, controlling configuration management, and incorporating engineering changes for F-16 production. What You Will Be Doing The Production Planner Sr will be responsible for the job functions and roles listed below: • Maintains the planning of various manufacturing processes including fabrication, assembly, and installation relating to a specific build area. • Incorporates work instruction change requests into master planning. • Creates work instructions for unscheduled production tasks (QARs, GPRs). • Provides customer support and works closely with cross-functional groups. What’s In It For You: 3 day weekends every weekend! ~ Candidate must be willing to work 4x10A Monday-Thursday 2nd Shift~ From onsite to remote, we offer flexible work schedules to...

Description: You will be the Paint Supervisor - Level 3 for the Coating & Finishing team which is responsible for leading paint and surface‑finishing operations on F‑16 and C‑130 programs. Must be able to work multiple shifts What You Will Be Doing As the Paint Supervisor - Level 3 you will be responsible for directing daily coating activities, ensuring safety, quality, schedule, and cost targets are met. Your responsibilities will include: Lead and coordinate all paint and coating work, enforcing safety and regulatory compliance while meeting quality, schedule, and cost objectives. Translate production plans into clear daily work assignments and monitor execution to ensure timely task completion. Identify and implement process improvements that boost quality, reduce cycle time, and lower cost. Champion FOD prevention through training, best‑practice enforcement, and continuous monitoring. Coach, mentor, and develop a diverse team,...