139 advanced mechanical engineer jobs found

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required Responsibilities for this Position As a mechanical engineer on the Surface Ships program, you’ll lead a cross functional team responsible for Designing, Testing, Implementing, Building, and Installing eqiupment on Surface Ships.   We encourage you to apply if you have any of these preferred skills or...

Basic Qualifications Education Requirements: Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     Clearance Requirements: Ability to obtain a Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: General Dynamics Mission Systems has an immediate opening for an Advanced Mechanical Engineer.  This position provides an opportunity to further advance the cutting-edge technology that supports some of our...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.       CLEARANCE REQUIREMENTS: : Department of Defense Top Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As a mechanical engineer for General Dynamics Mission Systems, Undersea Mission Solutions, you’ll be a member of and may lead a cross functional team responsible for the development of electronic and mechanical packaging...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a mechanical engineer for Navy Fleet Ballistic Mis sile Fire Control programs, you’ll be a member of a cross functional team responsible for Designing, Testing, Implementing, Building, and Installing Fire Control Tactical,...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an advanced mechanical engineer for regional strike, you'll be a member of a cross functional team working on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a mechanical engineer f or the Fleet Ballistic Missile Fire Control programs, you’ll be a Lead of a cross functional team responsible for Mechanical design, development, and insertion of high technology refreshes of...

Description SAIC is seeking a talented and motivated Advanced Packaging Engineer to support cutting-edge missile system hardware design and analysis efforts. In this role, you will collaborate with multidisciplinary engineering teams to develop, analyze, and validate advanced microelectronics packaging solutions for complex defense systems. This position offers a hybrid work schedule; however, candidates must reside within commuting distance of Crane, IN. JOB RESPONSIBILITES: Support mechanical design and analysis of missile system hardware and microelectronics packaging and assembly Perform mechanical modeling and simulation activities, including finite element analysis (FEA), thermal fatigue, shock and vibration analysis, and MATLAB-based modeling Apply systems engineering principles throughout all stages of the product lifecycle, including requirement development, verification, and validation Participate in and support Systems Engineering Technical Reviews,...

Basic Qualifications Bachelor's degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a Structural-Mechanical Engineer for Intelligence Systems, you will be responsible for performing structural analysis using applicable material resources, methods, and standards; perform design and development of mechanical systems; and carry out other tasks as required...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable amount of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Advanced Mechanical Manufacturing Engineer at Pittsfield, Massachusetts, you’ll be a member of a highly motivated cross functional team responsible for overcoming daily production challenges and continuously delivering on commitments.  You are encouraged to apply if you have...

Background The U.S. Nuclear Regulatory Commission (NRC) is proud to be ranked among the best places to work for compensation, work-life balance, and performance for mid-sized agencies in the Federal Government.     The NRC protects public health and safety and advances the nation’s common defense and security by enabling the safe and secure use and deployment of civilian nuclear energy technologies and radioactive materials through efficient and reliable licensing, oversight, and regulation for the benefit of society and the environment.   This Materials Engineer position is located in the Office of Advanced Reactors, Division of Advanced Reactor Engineering, Advanced Reactor Engineering Branch 1, 3 or 4.   Duties ·       Review complex materials engineering-related issues to evaluate applicant or licensee implementation of NRC regulations and requirements and to evaluate changes to existing licenses. ·       Utilize technical...

Description SAIC is seeking a Lead Systems Engineer Principal to support PMA251 Aircraft Launch and Recovery Equipment (ALRE) Systems Program Office, to lead the technical direction for high-visibility Naval aviation and shipboard systems that directly impact Fleet readiness and safety. As the Senior Principal Lead Systems Engineer for Foreign Miliary Sales (FMS), you will set architecture, drive requirements and integration, mentor engineers, and represent the program at senior reviews-partnering with NAVAIR/NAVSEA and International stakeholders across complex systems such as AAG, EMALS, ALRE, shipboard power/motion control, and related electromechanical/control domains. What You'll Lead & Deliver Own the system architecture & technical baseline for multi-disciplinary hardware/software systems; guide decisions on interfaces, behaviors, allocations, performance, safety, and sustainment across the lifecycle. Drive requirements management & traceability: lead...

Position Summary Odyssey has an exciting opportunity for a Senior Mechanical Engineer supporting an Air Force acquisition mission within the Air Force Life Cycle Management Center (AFLCMC), Armament Directorate Munitions Division (AFLCMC/EBH) at Hill Air Force Base, UT. In this Advisory and Assistance Services (A&AS) role, you will provide mechanical engineering support across the acquisition lifecycle to ensure weapon systems, subsystems, and support equipment meet program objectives for cost, schedule, performance, and compliance.   This is a full-time onsite position at Hill AFB, Utah. Responsibilities Duties include, but not limited to:  Provide mechanical/aerospace/materials engineering support across the acquisition, development, and sustainment lifecycle. Apply advanced engineering principles to ensure technical efforts align with program objectives, cost, schedule, and performance requirements....

Position: Hardware Engineer - Mechanical/Electrical Job Description: Arrow electronics provides specialized services and expertise across the entire product lifecycle. Arrow does this by connecting customers to the right technology at the right place, time, and price. Arrow provides extraordinary value to customers and suppliers - the best technology companies in the world - and connects them through the company's industry-leading services. We are seeking an experienced Mechanical/Electrical Engineer to join our team. In this role, you will not focus on board-level schematic design, but rather on hardware integration, component evaluation, and system architecture. You will act as the primary technical liaison with our main supplier, managing the selection and implementation of advanced interconnect solutions. What You'll Be Doing: • Work directly with customers to understand their needs and advise the best solution for their product development. • Translate...

Description SAIC is seeking a Mechanical Engineer to serve as an In-Service Engineering Agent (ISEA) in support of hypersonic weapons systems deployed aboard the Zumwalt-class DDG-1000 destroyer and Virginia-class submarines. This position plays a critical role in ensuring operational readiness, technical integrity, and lifecycle sustainment of cutting-edge hypersonic strike capabilities. As an ISEA, you will serve as a key technical authority bridging the gap between the engineering baseline and fleet operations. You will work collaboratively with Fleet Support Representatives, government program offices, and cross-functional engineering teams to ensure delivered systems align with system and subsystem requirements throughout their operational lifecycle. NOTE: This position is 100% remote/work from home. Monthly travel to Crane, IN is required. What You'll Do: Serve as a primary In-Service Engineering Agent (ISEA) for hypersonic weapons systems, providing mechanical...

QED Systems, LLC, is currently recruiting a Senior Systems Engineer, Network Architect to join our team at APG, MD to support our customer, Project Manager Intelligence Systems & Analytics (PM IS&A). The ideal candidate will be responsible for designing, analyzing, and optimizing the network infrastructure supporting Army Intelligence systems. This role is responsible for creating comprehensive architectural documentation, diagnosing network performance issues, and engineering robust solutions to ensure uninterrupted, high-speed data flow across the Department of Defense Information Network (DODIN-A) and intelligence networks. Duties: Architecture Documentation: Map, document, and maintain accurate "As-Is" and "To-Be" network architectures for Army Intel systems. Ensure all technical and operational viewpoints strictly comply with the Department of Defense Architecture Framework (DoDAF) and Enterprise Architecture (EA) standards. Bottleneck Identification &...

Description SAIC is seeking a motivated and highly skilled Mechanical Engineer to join our team focused on the design, development, and deployment of innovative maritime off-board countermeasure systems. This role offers a unique opportunity to contribute to developing advanced mechanical systems that protect naval vessels from threats. The successful candidate will be a creative problem-solver, applying a strong mechanical engineering foundation to support the system lifecycle, from concept development to production and delivery. Knowledge or experience in maritime domain systems and/or countermeasure technologies is highly desirable. Key Responsibilities: Collaborate with multi-disciplinary teams (engineers, designers, and analysts) to design, develop, and test mechanical systems and components for maritime countermeasure technologies. Participate in all phases of the product lifecycle, including requirements analysis, system design, fabrication, testing, and...

Description SAIC is seeking a motivated and highly skilled Mechanical Engineer to join our team focused on the design, development, and deployment of innovative maritime off-board countermeasure systems. This role offers a unique opportunity to contribute to developing advanced mechanical systems that protect naval vessels from threats.The successful candidate will be a creative problem-solver, applying a strong mechanical engineering foundation to support the system lifecycle, from concept development to production and delivery. Knowledge or experience in maritime domain systems and/or countermeasure technologies is highly desirable. Responsibilities may include: Collaborate with multi-disciplinary teams (engineers, designers, and analysts) to design, develop, and test mechanical systems and components for maritime countermeasure technologies. Participate in all phases of the product lifecycle, including requirements analysis, system design, fabrication, testing, and...

Position: Field Applications Engineer Job Description: Job Summary: As a Field Applications Engineer at Arrow Electronics, you will be helping our customers select and design-in Interconnect, Passives, and Electromechanical (IP&E) components and solutions from our extensive line card. Arrow FAE’s are trusted advisors, providing technical expertise and guidance to ensure the success of both our customers and our suppliers. What You'll Be Doing:   Drive demand creation by maximizing Arrow content on designs. Develop an advanced understanding of the customer’s needs and leverage Arrow’s engineering and design services resources to identify & facilitate solutions for customers. Apply technical expertise to influence designs utilizing solution selling, resources, and strategies. Partner with the sales team across pre-and post-sales activities. Provide technical support and consulting to promote demand creation. Prepare and give technical presentations to...

Description SAIC is seeking a highly skilled and motivated Systems Engineer to join our innovative Air Ground Interoperability and Integration Lab (AGIIL) team, supporting U.S. Army DEVCOM. In this critical role, you will contribute to the development and sustainment of cutting-edge tactical networking and messaging solutions that are vital to national security and the operational effectiveness of our warfighters. This role is on-site at Redstone Arsenal in Huntsville, AL. As a Systems Engineer within the AGIIL team, you will play a pivotal role in the full lifecycle development of our advanced tactical communication systems. You will be instrumental in translating operational needs into robust technical solutions, ensuring the successful delivery of critical capabilities for the U.S. Army and other DoW customers. This position offers the opportunity to work on challenging projects that directly impact military readiness and national defense. You will apply a comprehensive...

Description SAIC is seeking a CAD Drafter's to support the US Navy in North Charleston, SC . The ideal candidates will be responsible for providing design and drafting support to complete large complex assembly models and drawings. The CAD Drafter will be an integral part of the team creating/updating Technical Data Packages; being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer, to meet the customer demands. The candidate will be required to occasionally travel, locally, to the customer's facility where the vehicles are located to work with the engineers and technicians to develop prototype mounting solutions. Efforts will be focused toward GFE and custom fabrication integration for military C4ISR systems. Job Duties: (include but are not limited to) Provide...