13 automotive mechanic jobs found

Description: As a member of the SOFGLSS Lockheed Martin Team supporting the warfighter the Aircraft Mechanic II performs installation, adjustment, alignment and troubleshooting for final operational and functional testing on major aircraft weapon systems, assemblies and components for the C-130 aircraft. What You Will Be Doing As an Aircraft Mechanic II, you will be responsible for: • Inspects, troubleshoots malfunctions, rigs, repairs and modifies aircraft structures, structural components and aircraft systems of moderate difficulty. • Maintains and repairs aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical components. • Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. • Applies required expertise in restoring equipment condition and or operation; applies...

Description: As a member of the SOFGLSS Lockheed Martin Team supporting the warfighter the Aircraft Mechanic II performs installation, adjustment, alignment and troubleshooting for final operational and functional testing on major aircraft weapon systems, assemblies and components for the C-130 aircraft. What You Will Be Doing As an Aircraft Mechanic II, you will be responsible for: • Performance of overhaul and repair of weapon systems, their assemblies and components, such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic and flight control systems. • Troubleshooting aircraft systems, components, or subassemblies to make determination on proper operation. • Identification of malfunctions and corrective action required (whether portions must be repaired or replaced). • Disassembly, repairs and reassembly of major aircraft systems, their assemblies and components. • Connects related systems to the newly...

Description: THE WORK The work will be focused on design, analysis, and integration of various mechanical subsystems in Unmanned Underwater Vehicle (UUV), Remotely Operated Vehicle (ROV), Manned Submersibles, Subsea Systems and supporting systems such as launch and recovery, maintenance, and transportation systems. Supports conceptual, preliminary and detailed design of various subsystems of underwater vehicles and involved with assembly, integration and testing of the vehicle and support systems. WHO YOU ARE The candidate will collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Individual must be able to conduct trade studies and support design and develop mechanical mechanisms, structural, electromechanical, and hydraulic subsystems. Interface with various suppliers for selection of candidate subsystem hardware. Integrate candidate subsystem hardware and components. WHY JOIN US Providing ongoing training,...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Come work with multidisciplinary engineers focused on delivering world class Mechanical...

Description: You will be the Engineering & Technology Manager (ETM) for the Advanced Threat Warning Systems (ATWS) Production Hardware Engineering Integrated Product Team (IPT). Our team drives the transition of ATWS hardware—EO/IR sensors, window assemblies, and electronic processors—into production and sustainment, guaranteeing the highest performance and reliability for Lockheed Martin Missiles & Fire Control. What You Will Be Doing As the ETM & IPT Lead, you will own the cost, schedule, and technical planning for ATWS production while managing risk, opportunities, and all customer/supplier interfaces. You’ll set technical direction, enforce best in class processes, and champion the professional growth of a cross disciplinary engineering team, keeping the program ahead of expectations in a fast paced, collaborative environment. Your responsibilities will include: • Direct cost, schedule, and technical planning for ATWS production efforts. • Partner with...

Position Summary Odyssey Systems is seeking an Electrical / Electronics Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Position Summary Odyssey Systems is seeking a Senior Electrical / Electronics Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Position Summary Odyssey Systems is seeking a Senior Systems Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Position Summary Odyssey Systems is seeking a Systems Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This position supports Engineering, Professional, and Information Management (EPIM) services under the Army RS3 vehicle. RS3 covers a wide scope of...

Description: You will be the Mechanical Engineering Designer Sr for a Laser Weapon System. Our team is responsible for developing and implementing detailed designs and layouts of laser weapon system sensors, structures, and subassemblies, driving innovation and excellence in the field. What You Will Be Doing: As the Mechanical Engineering Designer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT...

Description: You will be the Mechanical Engineering Design Sr for the Future Terminal Interceptor capability development team. Our team is responsible for developing key technologies to support the follow-on upper tier missile program to THAAD. The next generation missile system will play a critical role to our Warfighter's ability to defeat the growing complex threats. The vehicle will be enabled by the next generation seekers, controls, avionics, and communications subsystems. What You Will Be Doing: As the Mechanical Engineering Designer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for...

Description: What We're Doing Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. Based in Orlando, TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships and driving armored vehicles. TLS is the corporation’s hub for simulation, X reality, live-virtual-constructive capabilities, advanced training devices and full-service training programs. TLS also provides sustainment services such as supply chain and logistics IT solutions, spares and repairs, as well as automated test and support equipment. THE WORK This is a position for a Software Engineering Lead on F35 Pilot Training Devices (PTD). As a Staff Software Engineer for the PTD team, you will: • Be...

Description: Job Description The Mechanical Design subject matter expert will serve as the technical authority for the Advanced Programs team with a focus on mechanical part designs. The ME SME will lead complex mechanical design efforts, drive integration of structures, mechanisms, and ensure that designs meet performance, reliability, producibility, and cost targets. Our team operates at the forefront of technology, tasked with creating capabilities that do not yet exist. In this position you will collaborate closely with design teams to embed Design for Manufacturability (DFM) principles into every mechanical‑engineering project. By applying extensive hands‑on machining experience and advanced engineering expertise, you will ensure that designs are cost‑effective, high‑quality, and suitable for high‑volume production while preserving performance and reliability. You will possess a strong grasp of NC machining programs and will continuously elevate design standards across...