121 electronics jobs found

Position Summary Odyssey Systems is seeking an Electrical / Electronics Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Position Summary Odyssey Systems is seeking a Senior Electrical / Electronics Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Position Summary Odyssey Systems is seeking a Senior Electrical / Electronics Engineer to support advanced situational awareness and multi-domain operations (MDO) programs. This role focuses on the design, analysis, and integration of RF and signal processing systems that enable next-generation battlefield awareness, electronic warfare, and spectrum management capabilities.   You will work closely with a multidisciplinary team of engineers, analysts, and operators to design and deliver systems that integrate data from diverse sensors, communications, and radar systems to provide actionable intelligence and operational advantage. The ideal candidate brings deep technical expertise in RF, signal processing, and spectrum management, along with experience contributing to mission-critical DoD programs in multi-domain environments.   This is a full time position located at MacDill AFB, FL or Ft. Belvoir, VA.    ***Contingent upon contract award***...

Description: The Fleet Ballistic Missile (FBM) program is seeking an Lead Electronics Engineer to join the Electrical Ground Support Equipment (EGSE) team. Location: This position does not support teleworking; the preferred candidate will be located near our Lockheed Martin Space facility at one of the Coolest places to work: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire, and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security®...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Description: You will be an Aircraft Electrician II, responsible for installing, testing, and maintaining electrical systems and components on C-130J aircraft. Our team is committed to delivering exceptional results, and we're looking for a highly skilled and experienced aircraft electrician to join our team. What You Will Be Doing As an Aircraft Electrician II, you will be responsible for: • Installing, clamping, terminating, and testing electrical cables and harnesses on C-130J aircraft • Inspecting, troubleshooting, and maintaining C-130J avionic and electrical systems, components, and related equipment • Removing and installing aircraft components as required, and conducting functional tests of components and systems • Assisting with aircraft launch and recovery, servicing, rigging, jacking, towing, and inspections • Reading and interpreting manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and...

Description: The Payload Launch Sites Support Services (PLSSS) Program sustains Launch Site Capabilities and provides launch support services to process Space Vehicles (SV). The highly specialized services involved in SV processing require expertise, familiarity, knowledge of program requirements, and technically complex one-of-a-kind Government Furnished Equipment (GFE) systems. These services include payload transportation; propellant services; payload processing support; mission integration; engineering and sustainment of specialized equipment, and facilities infrastructure. Services also include sustainment of security systems at Schriever Space Force Base, CO (SSFB), in addition to the two launch sites, Vandenberg Space Force Base, CA (VSFB) and Cape Canaveral Space Force Station, FL (CCSFS) Summary of Key Duties for this Position: The Engineer selected for this position will be assigned to the Electrical Engineering team primarily supporting the Launch Base Mission...

Description: At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Fleet Ballistic Missiles (FBM) is one of Lockheed Martin’s outstanding Lines of Businesses that prioritizes partnership, integrity, and reliability. The Life Extension 2 (LE2) team is an organization within the greater FBM program which supports the development of the Next Generation System by developing concepts, researching, and maturing technologies to support the...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge datalink and launcher systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: - Develop complex FPGA designs, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a...

Description: We are seeking a motivated Early Career Production Test Engineer to join our sensors team. This early-career position is ideal for engineers with 1 - 3 years of relevant experience who are passionate about test and integration. You will support the testing of printed circuit board assemblies (PCBAs / CCAs), electronic subsystems, and sensor pod level system testing, helping to maintain efficient production flows while learning best practices in test development and troubleshooting. In this hands-on role, you will work closely with production technicians, senior test engineers, design engineers, and quality teams to identify and resolve issues, improve test processes, and contribute to first-pass yield goals. Key Responsibilities: -Execute and monitor production test processes, including functional testing, boundary scan, environmental stress screening (ESS), and system level verification -Troubleshoot test failures at the board and system level using standard...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Rotary and Mission Systems is seeking a Summer 2026 Intern in Electrical Engineering. In this role, you will be responsible for supporting the design and development of a product from concept through to deployment. The...

Description: WHO WE ARE Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships, and driving armored vehicles. WHAT WE’RE DOING Our Flight Simulator Technicians work alongside a multidisciplinary team of engineers, cybersecurity and IT specialists, and training instructors to meet operational and reliability objectives across the extensive suite of flight‑simulator systems used under the AFSOC ACTS II program. *This position is contingent upon program award, expected in June 2026, with a tentative start date for August 2026.* THE WORK Primary Responsibilities • Diagnose & Repair – Troubleshoot and...

Description: WHO WE ARE Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships, and driving armored vehicles. WHAT WE’RE DOING Our Flight Simulator Technicians work alongside a multidisciplinary team of engineers, cybersecurity and IT specialists, and training instructors to meet operational and reliability objectives across the extensive suite of flight‑simulator systems used under the AFSOC ACTS II program. *This position is contingent upon program award, expected in June 2026, with a tentative start date for August 2026.* THE WORK Primary Responsibilities • Diagnose & Repair – Troubleshoot...

Description: WHO WE ARE Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships, and driving armored vehicles. WHAT WE’RE DOING Our Flight Simulator Technicians work alongside a multidisciplinary team of engineers, cybersecurity and IT specialists, and training instructors to meet operational and reliability objectives across the extensive suite of flight‑simulator systems used under the AFSOC ACTS II program. *This position is contingent upon program award, expected in June 2026, with a tentative start date for August 2026.* THE WORK Primary Responsibilities • Diagnose & Repair – Troubleshoot...

Description: You will be the Circuit Card Design Engineer for the Missiles & Fire Control (MFC) Small Form Factor Missile team. Our team develops cutting edge processor boards, interface cards and supporting hardware for next generation missiles that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will own the architecture, requirements development and trade study effort for missile electronic subsystems. You will work hand in hand with cross functional teams to translate system needs into robust circuit card designs that enable reliable, high performance missile operation. Your responsibilities will include: • Supporting the development of system architectures, including block diagrams, interface control documents and other architectural artifacts for missile subsystems. • Developing and refining performance, interface and environmental requirements for circuit card designs. • Conducting...

Description: The Challenge: Crave a technically challenging position that is also rewarding? This position is for a highly technical Multi-Function Administrator at the National ALIS Support Center, Tier 2 Service Desk. You will be responsible helping maintain fielded, operational ALIS/ODIN Nodes across the F-35 enterprise to include the security and integrity of our systems that keep our jets flying. It takes more than steel, advanced electronics and engine thrust to make the F-35 Lightning II, the world's fifth generation fighter, take flight. It is the Autonomic Logistics Information System (ALIS) that gives F-35 Lightning II operators the ability to plan, to maintain, to plan and sustain its systems over the life of the air vehicle. ALIS provides the IT backbone and capabilities to support current and future Warfighters across the U.S. and allied military services. Special Requirements: This position is at the F35 National ALIS Support Center supporting ALIS/ODIN. The...