126 flight test engineer jobs found

Description: Flight Test Control Engineer for the Test and Evaluation (T&E) Mod Team, primarily supporting F-35 test aircraft. The successful applicant will provide FTCE support for test aircraft modification operations at our Test Sites. Tasks will involve pre-mod coordination including working with the FW Flight Test Ops Center and Test Sites on mod planning, evaluating Basis of Estimates (BOE) for mod work, defining Production Equipment (PE) tooling requirements, identifying mod team skillset needs; Integrated schedule development; Providing a detailed execution plan; Mod Team onsite management; Serving as the ALIS POC during mod execution; Verifying engineering, technical and support data; Verifying work instructions and coordinating revisions; Coordinating applicable GFR/DCMA 8210 and CGOP requirements. Basic Qualifications: • Flight test experience with military aircraft • Experience working with Aircraft Systems and/or Maintenance/Modification Procedures •...

Description: Flight Test Control Engineer for the Test and Evaluation (T&E) Mod Team, primarily supporting F-35 test aircraft. The successful applicant will provide FTCE support for test aircraft modification operations at our Test Sites. Tasks will involve pre-mod coordination including working with the FW Flight Test Ops Center and Test Sites on mod planning, evaluating Basis of Estimates (BOE) for mod work, defining Production Equipment (PE) tooling requirements, identifying mod team skillset needs; Integrated schedule development; Providing a detailed execution plan; Mod Team onsite management; Serving as the ALIS POC during mod execution; Verifying engineering, technical and support data; Verifying work instructions and coordinating revisions; Coordinating applicable GFR/DCMA 8210 and CGOP requirements. Related skills include: • Schematic reading/interpretation/troubleshooting • Knowledge of installed aircraft systems/subsystems and Support Equipment • Knowledge of...

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) engineer to support development, missile integration, and flight test for an Advanced Program. What You Will Be Doing • Supporting design, fabrication, and procurement of the TM/FTS for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin’s comprehensive benefits package here....

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) electronics packaging design engineer to support development, missile integration, and flight test for an Advanced Program. Responsibilities includes: • Performing electronic packaging designs for cable harnesses and test boxes for integration and test • Supporting design, fabrication, and procurement of the TM/FTS components for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations We are committed to supporting your work-life balance and...

Description: Flight Test Control Engineer for the Test and Evaluation (T&E) Mod Team, primarily supporting F-35 test aircraft. The successful applicant will provide FTCE support for test aircraft modification operations at our Test Sites. Tasks will involve pre-mod coordination including working with the FW Flight Test Ops Center and Test Sites on mod planning, evaluating Basis of Estimates (BOE) for mod work, defining Production Equipment (PE) tooling requirements, identifying mod team skillset needs; Integrated schedule development; Providing a detailed execution plan; Mod Team onsite management; Serving as the ALIS POC during mod execution; Verifying engineering, technical and support data; Verifying work instructions and coordinating revisions; Coordinating applicable GFR/DCMA 8210 and CGOP requirements. Related skills include: • Schematic reading/interpretation/troubleshooting • Knowledge of installed aircraft systems/subsystems and Support Equipment • Knowledge of...

Description: This position is for a first line L-5 manager of the F-35 Flight Test Instrumentation (FTI) System Design team, part of Test & Evaluation, located in Fort Worth, TX. The team is responsible for orchestrating the FTI System Design to meet data collection requirements for F-35 flight testing. This manager position will lead a team of system design engineers and have OBS responsibilities over the entirety of F-35 FTI projects. Additionally, this role is expected to maintain 50% direct tasking to include, but not limited to, project lead duties, engineering reviews, system design assignments, and FTI System Development oversight from requirements definition to final delivery. Leadership responsibilities will include: review and maintenance of earned value metrics; development and maintenance of project-specific performance metrics; bid and proposal development and review; individual contributor performance assessments, recognition, and disciplinary actions;...

Description: We are Lockheed Martin Lockheed Martin is seeking a Software Engineer for the F-35 Mission Data File Release (MDFR) project. The F-35 Mission Data File Release (MDFR) tool is used by our F-35 customer Reprogramming Labs to encrypt and field Mission Data File (MDF) sets, which are pivotal to the execution of successful missions and overall operation of the F-35. The selected candidate will assume a role on the MDFR team supporting lab operations encrypting MDFs for lab test activities, supporting lab shifts as needed, and managing MDF encryption that directly supports flight test operations. They will help refine processes for encryption and release of MDFs, ensuring MDFs meet associated Security, Export, and Foreign Disclosure requirements, communicating concerns and assisting with root cause analysis as needed. The selected candidate should have software development experience, stepping in and assisting with MDFR software deployment operations as needed and...

Description: You will be the Weapons Integration Engineer Sr – Level 3 for the F‑35 Weapons Integration Team which is responsible for delivering cutting‑edge air‑to‑air weapon capabilities to the world’s most advanced fighter. What You Will Be Doing As the Weapons Integration Engineer Sr – Level 3 you will be responsible for designing, testing, and certifying weapon systems that empower pilots to dominate the skies. You will work hand‑in‑hand with vendors, program managers, and flight test crews to ensure every integration meets the highest standards of performance and safety. Your responsibilities will include: Develop system design, test, and certification plans for a variety of air‑to‑air weapons. Execute integration and flight‑test activities, analyzing results and driving corrective actions. Assess design changes, identify safety risks, and provide technical mitigation strategies. Produce and maintain comprehensive technical documentation,...

Description: You will be the Air Vehicle Software Engineer Sr for the F-22 Air Vehicle Software Development team which is responsible for advancing the flight control and vehicle management capabilities of the F‑22. What You Will Be Doing As the Air Vehicle Software Engineer Sr you will be responsible for translating mission needs into robust software requirements and delivering safety‑critical code that powers the F‑22 Flight Control and Vehicle Management System. Your responsibilities will include: Develop and maintain detailed software requirements for flight control and vehicle management. Write, test, and certify safety‑critical embedded code in accordance with aerospace standards. Integrate software with hardware components, performing hardware‑in‑the‑loop and system testing. Conduct verification and validation activities, analyzing test data to ensure compliance. Collaborate with cross‑functional engineers to troubleshoot issues and drive continuous improvement. What’s...

Description: The HWIL Software Integration Engineer (E4) provides senior level technical leadership for the development, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) simulations that combine missile hardware components with high performance software models. With 8 + years of relevant experience, the incumbent operates with technical authority, defines integration strategy, and influences program decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities • Software Architecture & Strategy - Define and evolve the software architecture for HWIL test beds, establishing standards for real time code, low latency data pathways, and deterministic execution. • Lead the development and integration of missile flight software, guidance algorithms, and sensor models into closed loop simulation environments (including 6 DOF missile dynamics). • Real Time Integration & Timing - Ensure end to...

Description: We are Lockheed Martin Advanced Electronic Warfare (EW) capabilities enable F-35 pilots to locate and track enemy forces, jam radars and disrupt attacks with unparalleled effectiveness. Advanced avionics give the pilot real-time access to battle space information with 360-degree coverage and an unparalleled ability to dominate the tactical environment. Data collected by sensors on the F-35 will immediately be shared with commanders at sea, in the air or on the ground, providing an instantaneous, high-fidelity view of ongoing operations - making the F-35 a formidable force multiplier while enhancing coalition operations. This system allows F-35 pilots to reach well-defended targets and suppress enemy radars. The F-35 Mission Data organization is in need of a Mission Systems engineer with an understanding of EW and RF principles to help deploy the Common Reprogramming Tool (CRT) to our customers. The CRT will effectively provide our customers with a more efficient,...

Description: The future of aerospace is built by engineers who can bridge the gap between mechanical design and advanced electronics. At Lockheed Martin Aeronautics, we’re looking for a Senior Mechanical Engineer to help design and integrate mission-critical electronic hardware for advanced aircraft systems. In this role, you’ll work on ruggedized avionics, embedded hardware, and electro-mechanical systems that support some of the most sophisticated aerospace technology in the world. If you enjoy solving complex hardware challenges, collaborating across engineering disciplines, and seeing your designs support real-world missions, this opportunity was built for you. What You Will Be Doing As the Mechanical Engineer - Level 3 you will be responsible for delivering robust mechanical solutions that enable the EHD team’s mission‑critical hardware to perform flawlessly in aerospace environments. Your responsibilities will include: Design and analyze mechanical...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a GNC Engineer to join our team in Orlando, FL OR Dallas, TX. What You Will Be Doing Representative areas of responsibility include performance analysis, generation of error budgets, hardware in the loop analysis, simulation modeling, fire control algorithm development, engage-ability analysis, development and refinement of guidance laws and autopilot algorithms, flight test support, seeker algorithm and truth modeling, and conducting trade studies. The GNC Engineer will support the integration, test, verification and validation of missile algorithms. As...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Sr GNC Engineer to join our team in Orlando, FL OR Dallas, TX. What You Will Be Doing Representative areas of responsibility include performance analysis, generation of error budgets, hardware in the loop analysis, simulation modeling, fire control algorithm development, engage-ability analysis, development and refinement of guidance laws and autopilot algorithms, flight test support, seeker algorithm and truth modeling, and conducting trade studies. The Sr GNC Engineer will support the integration, test, verification and validation of missile...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: You will be the Lead Mechanical Design Engineer for the Common Flight Test Equipment (C FTE) team supporting the Precision Strike Missile (PrSM). Our team designs, prototypes, and validates the Telemetry and Flight Termination Systems that equip every PrSM increment, ensuring reliable data down link and safe missile termination from concept through flight testing. What You Will Be Doing As the Lead Mechanical Design Engineer you will own the mechanical structural interface of these critical subsystems. You’ll coordinate Mechanical and Electrical Engineers, work hand in hand with the Packaging team on harness routing, and serve as the primary technical liaison for internal and external customers. You’ll guide multiple missile configuration variants from CAD review through prototype build, Design Verification Testing (DVT), and Qualification testing. Your responsibilities will include: • Keeping the Integrated Master Schedule on track and reporting progress...