28 fpga engineer jobs found

Description: Seeking an FPGA Design Engineer to support RF Sensor Stimulation Hardware-in-the-Loop (HWIL) capabilities. FPGA Engineer to oversee the design, development and implementation of Radio Frequency (RF) signal modulation capabilities in FPGAs. Tasks for this position will include the definition of FPGA architecture, development of VHDL firmware and development of interfaces to ancillary HWIL HW. Also responsible for the integration, test, verification and validation of multiple subsystems. Basic Qualifications: • 8+ years of experience developing FPGA Programmable Logic • Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education • HDL programming experience with VHDL, Verilog, and/or System Verilog • Experience on Hardware-Software Integration and Validation • Familiarity with FPGA toolsets (Vivado, Libero, and/or Quartus strongly preferred) • Experience with electronics design...

Description: You will be the FPGA Engineer Lead for the ATWS Directed Energy Imaging team. Our team delivers advanced imaging platforms by defining FPGA architectures, developing RTL, validating designs, and fielding production ready hardware that meets stringent performance, cost, and schedule goals. What You Will Be Doing As the FPGA Engineer Lead you will own the end to end development of FPGA solutions and coordinate a multidisciplinary group of systems engineers, software developers, and hardware integrators. You’ll translate system requirements into reliable, high performance hardware while keeping technical risk in check and communicating progress to senior leadership and customers. Your responsibilities will include: • Defining FPGA architecture and creating high quality RTL using AMD/Xilinx Versal and UltraScale+ families. • Driving verification and validation activities, including board level testing and video/signal processing implementation. • Managing task...

Description: You will be the FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge datalink and launcher systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: • Develop complex FPGA designs, including specification, design, verification, and implementation • Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements • Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements • Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...

Description: You will be the ASIC & FPGA Design Engineer for the ASIC/FPGA department at Lockheed  Martin  Missiles  and  Fire  Control. Our team delivers full custom analog and mixed signal ICs that power advanced defense systems, ranging from 130 nm down to 12 nm and including high voltage BCD processes. What You Will Be Doing As the ASIC & FPGA Design Engineer you will own the entire layout flow—from floorplan through tape out—working hand in hand with circuit designers to turn schematic intent into high performance, parasitic aware physical designs. You will operate in a dual tool environment (Synopsys Custom Compiler and Cadence Virtuoso) and drive physical verification closure across multiple foundries, directly supporting mission critical programs. Your responsibilities will include: • Create floorplans, place and route analog blocks, optimizing area, matching, signal integrity and power delivery. • Drive DRC, LVS and ERC verification to achieve full closure...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Senior ASIC & FPGA Design Engineer for the ADSWAP CN program. Our team builds the next generation missile and fire control systems that power aerospace and defense grade platforms. We turn ambitious system concepts into hardened hardware, partnering with software, hardware, and systems engineers to deliver integrated, high performance solutions. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end creation of sophisticated FPGA architectures—from initial concept through detailed implementation and verification. You will define specifications, run trade off studies, and ensure every design meets rigorous power, thermal, and utilization targets while staying aligned with Design Assurance standards. Your responsibilities will include: • Develop complete FPGA design specifications and high level architecture in collaboration with cross functional teams. • Select the optimal FPGA family (Xilinx, Intel,...

Description: You will be the FPGA Design Engineer for the Missile & Fire Control (MFC) team at Lockheed Martin. Our team delivers advanced FPGA solutions that enable current and next generation defense systems, providing the high performance computing and signal processing capabilities required for mission critical platforms. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA architectures from specification through implementation, conduct trade studies to optimize device utilization, power and thermal performance, and work closely with software, hardware and systems engineers to define requirements and ensure compliance with the Design Assurance process. Your responsibilities will include: • Translating system specifications into detailed FPGA designs, creating RTL, constraints and HDL code (VHDL/Verilog). • Performing synthesis, place and route, timing analysis and power budget assessments to meet performance, power and thermal budgets. •...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: What You Will Be Doing You will be a Strategic Software, Staff with the ability to capture/derive requirements and perform CSCI/CSC/CSU decomposition, detailed design work, and bench level testing. Candidate will perform requirements capture through detailed design, implementation, and integration of a new System on a Chip (SoC) design for Block 1.1. Candidate will be responsible for supporting all data link software design including the following specialty capabilities: RF waveform implementation and incorporation of Simulink Coder into software, cryptographic algorithm development and debug, and low-speed messaging and communication with external peripherals. Prior experience with Microchip SoC’s, Xilinx SoC’s, UVM, and GitLab is preferred. As a Staff Software Engineer, your responsibilities will include but are not limited to: • Develop and maintain embedded software applications and/or desktop applications. • Tasks will involve requirement, design, code,...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of a control module design. • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and collaborating with EPCAD to...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: The HWIL Electrical Design & Integration Engineer serves as a senior engineer responsible for the end‑to‑end electrical design, integration, and verification of real‑time, closed‑loop HWIL capabilities. With 3 + years of relevant experience, the engineer works under general direction, leads technical efforts, influences project objectives, and engages senior leadership on critical matters. What You Will Be Doing • Lead Electrical Design: Develop detailed cable harnesses, complex PCB layouts, and component integration strategies for multiple HWIL programs. • Simulation & Modeling: Support HWIL real‑time closed‑loop simulation (including Missile 6‑DOF). • Advanced Troubleshooting: Diagnose and resolve hardware failures, EMI/EMC issues, timing mismatches, and connector problems using lab equipment. • Integration Leadership: Guide the integration team in debugging electrical subsystems, ensuring seamless incorporation of stimulation equipment into the HWIL...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and...

Description: You will be the AI/ML Research Engineer Sr for the Autonomy & Artificial Intelligence (A/AI) team. Our team creates cutting‑edge machine‑learning and computer‑vision solutions that enable safe, mission‑critical capabilities for Lockheed Martin Missiles and Fire Control. What You Will Be Doing As the AI/ML Research Engineer Sr you will be responsible for designing, implementing, and validating advanced AI/ML algorithms that solve complex perception challenges. Your responsibilities will include, but are not limited to: Design, implement, and test deep‑learning object‑detection and classification pipelines, including image‑processing and data‑augmentation techniques for missile and fire‑control products. Develop, verify, and validate complex models and simulations that leverage convolutional neural networks, transformers, generative AI, and related techniques. Deploy and integrate AI/ML algorithms to CPUs, GPUs, and edge devices, ensuring...