30 missile mechanic associate jobs found

Description: Under the guidance of higher level personnel, perform tasks associated with the assembly, disassembly, modification, repair, checkout and movement of all types and configurations of new and fleet return Trident II missiles and associated missile components. Perform inspection and related functions involved in quality assurance and acceptance of Fleet Ballistic Missile (FBM) systems, materials and support equipment at the Strategic Weapons Facility Atlantic (SWFLANT). Knowledge of computer skills to perform work is required. Assist in assembly and disassembly operations involving such functions as mating/de-mating of motors, equipment section and interstage sections; removal and installation of electrical, electronic, hydraulic, pneumatic and mechanical components, assemblies and units. Perform inspection of the assembly, disassembly, modification, repair, rework and testing of missile sections, sub-assemblies, complete systems and subsystems; of the receipt,...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Mechanical/Vibration Test Engineer for the Engineering Team which is responsible for advancing aerospace testing capabilities. What You Will Be Doing As the Mechanical/Vibration Test Engineer you will be responsible for delivering hands‑on testing expertise that drives our aircraft development and sustainment programs. Your responsibilities will include: Perform hands‑on mechanical and vibration testing in a lab environment. Provide mechanical/vibration support to advanced development, sustainment, and engineering test efforts. Execute mechanical tests following ASTM, Lockheed, and customer standards. Configure test machine setups, program test profiles, and manage data acquisition systems. Program and operate MTS test control software while assisting the lead engineer in the vibration lab. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling...

Description: Work with technical assistance and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases. Assist in and or perform the receipt, unpackaging, move to storage, and shipment of missile rocket motors. Assist in and or perform the transportation of inert and explosive major missile components to and from magazines and processing buildings using gas, electric, and diesel powered trucks and trailers and other FBM facility specific handling support equipment. Assist in recording data, maintaining records and processing documents pertaining to the movement and handling of missile components. Assist in and or perform dispatcher functions. Assist in and or perform grounding tests in Limited Area (LA) using appropriate meters and test equipment (SWFLANT ONLY). Assist in and or perform maintenance and repair of support equipment and material handling equipment and performing preventative...

Description: We are Lockheed Martin This position will work in Quality Control in Marietta, GA, to support all aspects of the C-130J build cycle to include assembly, structural repairs on sub or major assemblies, and functional checks. • This position is responsible for ensuring QA policies, procedures, and practices are followed and executed correctly to company and regulatory standards • Initiates, reviews, analyzes, and reports on quality-related data/metrics from production, service, supplier, or process improvement activities and analyzes using statistical techniques • Interfaces as needed with manufacturing, engineering, customer, vendor, and subcontractor representatives to ensure process requirements are met • Facilitate customer presentations for Mandatory Government Inspections (MGI) and/or Safety of Flight activities (SOF) • Conduct surveillance audits for compliance to the C-130 Quality Management System • Responsible for developing and coordinating defect...

Description: You will be the Chief Tool Engineer - Digitization Owner - Level 6 for the Production Engineering team which is responsible for advancing tool‑digitization and innovative tooling solutions across the AMMM portfolio. What You Will Be Doing As the Chief Tool Engineer - Digitization Owner - Level 6 you will be responsible for leading tool‑digitization initiatives, driving cost‑effective tooling designs, and coordinating cross‑functional teams to ensure production success. Your responsibilities will include: Serve as the Tool Digitization Owner, establishing strategy and overseeing implementation across Production Engineering. Lead development of innovative tooling solutions that reduce span, cost, and cycle time while applying cutting‑edge design principles. Chair the Manufacturing Change Control Board (MCCB) and manage configuration control for all tooling assets. Partner with the Chief Manufacturing Engineer to integrate tool design into...

Description: You will be the NDT Engineer for the NDT Team which is responsible for... What You Will Be Doing As the NDT Engineer you will be responsible for supporting non‑destructive inspection across production, quality, sustainment, and engineering test initiatives. Your responsibilities will include: Provide NDI support to production, quality, sustainment, and engineering test efforts Perform NDI tests on airplane parts and components Write NDI procedures with detailed drawings for inspections Operate eddy current, ultrasonic, and dye‑penetrant equipment on aircraft parts Conduct materials testing and failure analysis What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset,...

Description: The design team member will support design and construction of Weapons System Infrastructure & Capabilities (WSIC) projects to include major facility modifications, construction projects, and support equipment installation projects for the Trident II missile. During Design, the design team member will develop and review facility engineering design packages, including drawings and sketches, technical specifications, and cost estimates. Facility project designs will be evaluated for compliance with engineering principles and best practices, company standards and policies, customer contract requirements, and relevant specifications and regulations. During construction, the design team member will review and interpret construction plans and specifications to ensure alignment with design intent. Regular site visits will be conducted to verify that constructed facilities meet design specifications and company requirements. Any construction deviations or deficiencies...

Description: This classification requires the performance of varied work assignments associated with post DD250 final assembly and subassembly of missiles as well as tasks associated with processing their designated reentry bodies. Work with technical assistance and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases. Assist in/and or perform the determination of the sequence of events and equipment required to perform any post DD250 final assembly and disassembly tasks related to missile operations such as package, unpackage, modification, repair, checkout, testing, movement, removal and installation of mechanical and electrical components, mate and demate of reentry bodies and related operations. Assist in the performance of missile preset testing involving connection to and operation of missile checkout equipment. Perform authorized repairs, component replacement, test, checkout and inspection of...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Flight Line Test Mechanic C-130 for the team which is responsible for performing the servicing and troubleshooting of complex aircraft systems. What You Will Be Doing As the Flight Line Test Mechanic C-130, you will be responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service aircraft structures, hydraulic and plumbing, rigging, and mechanical systems, and power plants requiring ingenuity in deviating from standard practices and in adapting and altering structures and systems configurations to meet special requirements. Your responsibilities will include: Making changes and replacements to hydraulic, plumbing, and rigging systems, fuel and oil units, power plants, etc. Making any permissible adjustments to ship's systems in order that they meet flight line requirements Mocking-up, fabricating, and installing new parts, structures, and systems and performing final flight...

Description: You will be the Systems Engineer for the Advanced Development Program (ADP) which is responsible for pioneering cutting‑edge aircraft concepts. What You Will Be Doing As the Systems Engineer you will be responsible for translating complex requirements into robust system architectures, driving Model‑Based Systems Engineering (MBSE) practices, and delivering high‑quality artifacts that enable rapid development. Your responsibilities will include: - Developing, designing and maintaining system architecture models using Cameo MBSE tools. - Collaborating with cross‑functional teams to integrate multidisciplinary requirements. - Engaging senior leadership with clear, concise technical briefings and status updates. - Managing multiple, concurrent assignments while meeting strict timelines. - Supporting teammates proactively, stepping in wherever needed to ensure mission success. What’s In It For You We are committed to supporting your work‑life balance and overall...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: You will be the Internal Flowpath Design Engineer – Propulsion for the Propulsion Systems Team which is responsible for designing and optimizing propulsion flowpaths. What You Will Be Doing As the Internal Flowpath Design Engineer – Propulsion you will be responsible for creating high‑performance internal flowpaths for aircraft and missile propulsion systems, performing CFD analyses, and developing CAD models that translate into reliable hardware. Your responsibilities will include: Design internal flowpaths using advanced CAD tools. Conduct CFD simulations to assess aerodynamic performance. Develop and execute test plans for power‑plant components. Collaborate with cross‑functional engineering teams to integrate designs. Ensure designs meet efficiency, safety, and regulatory requirements. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Industrial Electronics/Electrical Technician for the team which is responsible for installing, maintaining, overhauling, rebuilding, modifying, and repairing industrial electrical systems and equipment. What You Will Be Doing As the Industrial Electronics/Electrical Technician, you will be responsible for troubleshooting integrally related hydraulic, mechanical, and electronic control systems to isolate malfunctions in electronic controls and servo systems. Your responsibilities will include: Troubleshooting and repairing electronic control systems, including computer numerical controls, programmable controllers, and micro-processors Disassembling, repairing, or replacing defective components and making exacting coordinated adjustments as necessary to maintain control performance and overall machine efficiency Installing, maintaining, and repairing industrial electrical motors, transformer banks, transformers, welding...