62 operations engineer jobs found

Description: We are Lockheed Martin Your Mission is Ours. Instrumentation Operations Engineers are responsible for integrating requirements and programming new instrumentation data acquisition equipment, FTI fiber system, analog and digital signal conditioning hardware during integration and flight test. Works independently or leads a team to execute project, schedule, and technical requirements to meet the goals of the test program. Oversees installation, checkout, and calibration of data systems, to ensure collected data can be properly displayed, processed, and analyzed. Maintains configuration control, and mission capability of the instrumentation system as well as all associated ground support equipment. Responsible for specification, selection, design, integration, operation and maintenance of airborne data acquisition systems, and their related components. This includes telemetry, flight test specific hardware, or prototypes for flight test evaluation. Support...

Description: You will be the Aeronautical Engineer (Wind Tunnel Operations) - Level 4 for the Low‑speed 2 Wind Tunnel (L2WT) Operations Team which is responsible for advancing aerodynamic testing capabilities. What You Will Be Doing As the Aeronautical Engineer (Wind Tunnel Operations) you will be responsible for leading a critical wind‑tunnel operations team, delivering high‑impact test results for multiple programs. Your responsibilities will include: Developing affordable, low‑risk testing approaches that meet customer objectives. Integrating and calibrating instrumentation, actuation devices, and electronics for data acquisition. Designing rapid‑prototype wind‑tunnel models and support hardware using existing digital‑twin CATIA models. Overseeing fabrication and assembly of support‑system components and model parts. Operating the wind tunnel and executing test plans in accordance with customer requirements. What’s In It For You We are...

Description: You will be the Aeronautical Engineer (Wind Tunnel Operations) - Level 5 for the Low‑speed 2 Wind Tunnel (L2WT) Operations Team which is responsible for advancing aerodynamic testing capabilities. What You Will Be Doing As the Aeronautical Engineer (Wind Tunnel Operations) you will be responsible for leading a critical wind‑tunnel operations team, delivering high‑impact test results for multiple programs. Your responsibilities will include: Developing affordable, low‑risk testing approaches that meet customer objectives. Integrating and calibrating instrumentation, actuation devices, and electronics for data acquisition. Designing rapid‑prototype wind‑tunnel models and support hardware using existing digital‑twin CATIA models. Overseeing fabrication and assembly of support‑system components and model parts. Operating the wind tunnel and executing test plans in accordance with customer requirements. What’s In It For You We are...

Description: LM Space National Security Solutions has an open position for system engineering support across multiple areas related to the maintenance, operations, and recapitalization upgrades to a global satellite command and control and ground terminal communication enterprise. The System Engineer for Satellite Operations and Ground Communications will be responsible for contributing technically to a variety of Systems and Software Engineering tasks associated with supporting Operations and Maintenance (O&M) as well as system upgrades. This role will be a key technical member supporting a globally dispersed workforce with a focus on real-time satellite mission operations and longer term mission optimization, including enhancement tasks that expand beyond day to day O&M sustainment. The role will interface across system segments, program management, customers and subcontractors in successful completion of assigned tasks. Maintenance tasks include efforts to investigate...

Description: The ADP team is looking for a Sr. Fabrication Manufacturing Engineer to join our team in Palmdale, CA! What You Will Be Doing Lead small teams to ensure production needs are met and discrete deliverables are completed ahead of need. Conduct critical design reviews and collaborate with cross-functional teams to ensure alignment with manufacturing processes. Develop assembly plans and innovative solutions to address daily challenges, ensuring efficient production flow. Create and maintain detailed manufacturing products and documentation. Provide direct support on the production floor, troubleshooting issues and implementing solutions. Utilize Product Lifecycle Management (PLM) and Manufacturing Execution Systems (MES) to develop manufacturing processes. Interpret drawings and model-based designs, translating them into actionable steps for manufacturability for the production environment. Collaborate with team members to explore out-of-the-box thinking and...

Description: Our Team: We lead the full lifecycle of embedded and mission software development—from requirements, architecture, and design to implementation, integration, and test. Our expertise spans air vehicle systems, avionics, communications, and infrastructure software, including supplier and subsystem integration. We drive CI/CD pipelines, DevSecOps automation, and simulation environments, while ensuring compliance with airworthiness, safety, and cybersecurity standards. Our team supports aircraft integration, GNC, and hardware/software coordination, leveraging MBSE, Cameo modeling, and SCFTA for system design. We execute rigorous software testing (UT, FQT, regression, FMET, SCO), support flight test and control room operations, and deliver data analysis, customer demos, and proposal content. Through agile processes, planning, and peer reviews, we ensure technical excellence and mission success across SPI, CAM, IPTL, and SPE roles. What you will do: We are seeking an...

Description: Industrial Engineers operate in a fast-paced, agile environment, and utilize the latest technology in PLM, MRP, MES, Data Analytics, and Data Visualization Software to produce analysis’ & metrics which enable imperative business decisions. This position will provide data-driven solutions that enable the production team to optimize their manufacturing schedules and costs. This position requires collaboration with all functional groups through the entire product lifecycle within a production environment. This talented team member understands data and loves building tools that use data to surface problems and give people a convenient way to act. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth...

Description: We are Lockheed Martin Skunk Works® is on the leading edge of manufacturing innovation. We continually look for ways to improve processes and performance while extracting cost by focusing on the areas of subsystems installation and integration. What You Will Be Doing Lead small teams focused on portions of the build to ensure production needs are met and discrete deliverables are completed ahead of need. Conduct critical design reviews and collaborate with cross-functional teams to ensure alignment with manufacturing processes. Develop assembly plans and innovative solutions to address daily challenges, ensuring efficient production flow. Create and maintain detailed manufacturing products and documentation. Provide direct support on the production floor, troubleshooting issues and implementing solutions. Utilize Product Lifecycle Management (PLM) and Manufacturing Execution Systems (MES) to develop manufacturing processes. Interpret drawings and...

Description: Our team is responsible for work measurement, cost analysis, capacity requirements planning (reporting and analysis), capital project management and budget planning, discrete event simulation etc. As an Industrial Engineer, you will support cross-functional improvement efforts for a production area, working closely with various teams to identify areas for improvement and implement changes. You will also perform data analysis, observations, and time studies to support cost driver analysis and process improvement. Your responsibilities will include: -Supporting cross-functional improvement efforts for a production area -Identifying areas of focus for production improvement across a wide scope - Work directly with and in support of the production operations team -Performing observations and time studies to support cost driver analysis and process improvement -Using visualization and data analytic tools to analyze production processes -Applying Lean and Six-Sigma...

Description: You will be the Production Machinery Maintenance Engineer - Level 5 for the Facilities and Plant Engineering team which is responsible for coordinating labor, overhead, and capital investments in key production machinery. What You Will Be Doing As the Production Machinery Maintenance Engineer - Level 5 you will be responsible for driving reliability, efficiency, and continuous‑improvement initiatives across the plant’s equipment base. Your responsibilities will include: Plan and execute predictive, preventative, corrective, and emergency maintenance to maximize machine uptime and protect production windows. Conduct operator failure and root‑cause analyses, develop training, and translate findings into actionable improvement plans. Implement Total Manufacturing Practices such as Clean As You Go (CAYGO) and convert them into verifiable eCards in partnership with Industrial and Manufacturing Engineering. Collaborate with Planning &...

Description: Occupational and Ground Safety Engineer supporting the F-35 program at Edwards AFB. Primarily responsible for supporting the F-35 Ground Safety Program in all ground safety and occupational safety activities and support of flight safety as needed at the LM Aero Edwards AFB facility. Specific tasks include conducting and directing occupational and ground safety program; provide safety oversight of daily operations; perform test hazard analyses and propose risk mitigation measures. Provide ESH support to Lockheed Martin Aeronautics ESH Integration and Strategy team and facilitate implementation of ESH procedures and ESH management systems as required by Aeronautics (Aero) Conduct and document periodic ground safety surveys and other tasks IAW US government requirements Performing audits of ESH systems to ensure facilities are compliant to relevant ESH procedures and regulatory requirements. Collect ESH data and report systems metrics for the business. Monitor...

Description: You will be the Systems Engineer (Radar/EW) - Level 4 for the Skunk Works which is responsible for advancing radar and electronic warfare capabilities on Lockheed Martin’s most advanced aeronautics programs. What You Will Be Doing As the Systems Engineer (Radar/EW) - Level 4 you will be responsible for delivering high‑performance RF solutions that enable mission‑critical radar and EW systems across the product lifecycle. Your responsibilities will include: Perform RF engineering analyses and modeling for radar and electronic warfare subsystems. Contribute to system design, development, integration, test, and production activities. Apply Model Based Systems Engineering (MBSE) practices to create and maintain digital system models. Collaborate with cross‑functional teams to validate requirements and ensure seamless integration. Support sustainment and troubleshoot performance issues throughout the hardware lifecycle. What’s In It For You...

Description: Senior Quality Assurance Engineer (Level 3) • Candidate will develop, modify, and maintain quality evaluation and control systems on specified programs within Advance Development Programs (ADP) (Skunk Works) in Palmdale CA. • This includes collaborating with engineering and manufacturing counterparts to ensure quality requirements and standards are achieved. • The candidate will design and implement inspection and testing processes including enabling new technologies based on business case analysis to achieve quality requirements in the most effective manner. • Candidate will perform data analysis and identify corrective action and improvement opportunities. • Maintains a DCMA/NASA/Customer quality relationship. Establishes and maintains effective Quality Program Team business rhythm. • The selected candidate will ensure corrective measures meet acceptable reliability standards and that documentation is compliant with stated requirements. • Areas of specialization...

Description: You will be the Semi Conductor Equipment Engineering Manager for the Semiconductor Equipment Engineering team. Our team is responsible for driving equipment performance and reliability across semiconductor wafer production. What You Will Be Doing As the Semi Conductor Equipment Engineering Manager you will be responsible for leading a high‑performing group of engineers and technicians to maximize equipment effectiveness, ensure safe operations, and support capital initiatives. Your responsibilities will include, but are not limited to: Execute strategies to improve Overall Equipment Effectiveness, including equipment availability, yield, cycle time, reliability, and safety. Lead technical troubleshooting of equipment, debugging PLCs, reviewing code, and interpreting schematics to resolve unplanned downtime. Support capital planning and oversee evaluation, installation, and validation of new equipment. Manage vendor and supplier...

Description: What You Will Be Doing You will be a Avionics Technician LVL3 for the Netherlands ICS Maintenance Team supporting our Dutch customer. Our team is responsible for the sustainment maintenance and flight line operations of the Netherlands F-35 OT&E Flight Test Program. As a Avionics Technician LVL3 you will impact everything from daily flight inspections, routine maintenance, as well as performing troubleshooting with engineer. Your responsibilities will include but are not limited to: Conducting flight operation inspections, conducting operational level maintenance, traveling to support our customer at offsite locations, performing MOD/DEMOD/TCTD maintenance, maintenance documentation, undertaking additional responsibilities as directed by the maintenance manager, and professional and effective communications/interactions with our customer. What’s In It For You: : We offer flexible work schedules to comprehensive benefits investing in your future and...

Position: Lab Administrator (Einfochips) Job Description: What You'll Be Doing: Role – Skilled Data Center / Lab Infrastructure Engineer with 2–4 years of hands-on experience in managing large-scale lab environments, network infrastructure, and server deployments. The ideal candidate will have strong expertise in hardware setup, network troubleshooting (L1–L3), virtualization, and lab operations support. This role requires a proactive professional capable of ensuring high availability, efficient operations, and seamless support for engineering and testing teams. Key Responsibilities – Perform rack-and-stack, cabling, and physical setup of servers, network devices, and lab infrastructure Configure and deploy server hardware, operating systems, and virtualization platforms Support lab buildouts, testbed deployments, and environment readiness for engineering teams Troubleshoot network and connectivity issues (Layer 1–3) and ensure minimal downtime...

Description: You will be the System Engineer, Integration Lab Stf for the Skunk Works (Advanced Development Program) team which is responsible for overseeing lab operations, integrating and maintaining lab hardware, coordinating cross functionally with other teams to ensure lab operations meet important milestones, support testing events. What You Will Be Doing As the System Engineer, Integration Lab Stf you will be responsible for turning visionary aircraft concepts into operational hardware and supporting the Systems Integration Lab. Your responsibilities will include: Perform system integration, test, and troubleshooting of hardware/software configurations. Install equipment in server racks and maintain lab inventory. Design and integrate hardware for the Systems Integration Labs. Establish Hardware‑In‑The‑Loop (HWIL) and Closed‑Loop testing in the lab. Interface with software developers and systems engineers to support verification activities....

Description: This role will support the Functional Operations Research and Test manufacturing team in the Advanced Development Program line of business. You will be supporting multiple unclassified and classified programs to include day to day execution tasks at the FORT. As a Project Engineer you will be responsible for supporting the shop floor in all fabrication efforts. You will support proposal work as necessary, manufacturing small to medium projects, provide manufacturability feedback to program stakeholders and customers. You will be expected to interface with internal customers and support the FORT Supervisor to meet organizational objectives. You will be expected to take 3D engineering data and convert it to usable formats to manufacturing equipment at the FORT to produce aerospace products. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space. At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing men and women are on a mission to make a difference in the world and every single day we use our unique skills, talents and experiences to design and build solutions to some of the world’s hardest engineering problems. Do you want to be part of a culture that inspires employees to envision the impossible, perform with excellence and build incredible products? We provide the resources, inspiration and focus—if you have the passion and courage to dream big, then we want to build a better tomorrow with you! We are looking for a dedicated Space Vehicle Responsible Systems Principle Engineer (SV RSE) to join the NGG/OPIR team in Sunnyvale, California. This role serves as the technical advocate for the satellite throughout its life cycle, from requirements definition through mission...

Description: We are Lockheed Martin You will be the Ground Station Flight Engineer. The Flight Engineer team is responsible for ground station maintenance and operation of flight simulators. As a crew member, you will actively participate in test events and assist other crew members with accomplishing test requirements. You will assist with troubleshooting, fault isolation, diagnostics, and fault resolution. What You Will Be Doing As the Ground Station Flight Engineer, you will be a Specialized System Engineer that acts as a system expert. You will perform computer administration functions to include software installations and upgrades, user account and hardware maintenance. As a ground station Flight Engineer, you will be an integral crew member responsible for pre & post flight operations. Your responsibilities will include: • Perform real-time troubleshooting of complex hardware/software anomalies with analysis and evaluation of asset under test. • Execute...