10 electronic test technician jobs found

Description SAIC is seeking an Engineering Technician in Hanahan, SC . Duties and Responsibilities: Maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. Determines equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. Performs simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common...

Description SAIC is seeking an Integration Technician for our customer site in North Charleston, SC to support MADIS (Marine Air Defense Integrated System). Primary function includes activities such as basic machining, modification, fabrication, assembly and test for metal, electrical and COTS components. Job Description: Will be primarily tasked with performing moderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install, modify, and perform upgrades in support of C5ISR systems May assemble cabinets, chassis, consoles, or similar devices and install them with electronic or electro-mechanical equipment Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Construct components, subunits, or simple models, adapt standard equipment, and troubleshoot system failures through various skill...

Standard Job Description You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools.  What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. Proficient in AI prompting as it applies to this position and practice     What’s In It For You: 3 day weekends...

Description SAIC is seeking a Quality Assurance Engineering Technician II for our North Charleston, SC customer site. The Quality Assurance Engineering Technician II performs technical support work in a quality-focused environment, with primary responsibility for incoming material receipt inspection, documentation of inspection activities, and creation and maintenance of Non-conformance Reports (NCRs). This position applies a practical knowledge of engineering and quality principles, technical data, and standard procedures to ensure materials and components conform to specifications, drawings, and contract requirements before release for use. The role operates under the general direction of engineers or senior quality staff and requires the ability to work from a variety of technical documents, use standard test and inspection equipment, and produce clear, accurate technical records. Key Responsibilities Material Receipt & Quality Inspection Perform incoming...

Description SAIC is seeking a Systems Integration Supervisor / Production Manager to lead integration and production activities for the Mobile Command Vehicle (MCV) program in Hanahan, SC. This role translates customer mission and business requirements into integrated systems designs and oversees day-to-day shop floor operations for complex electronic systems installed in tactical vehicles. JOB DESCRIPTION Directly supervises individual contributors (skilled technicians, QC personnel) and/or entry-level professionals. Provides direction to employees according to established policies and management guidance. Administers company policies that directly affect subordinate employees. Leads daily production and integration operations for MCV platforms, including planning, scheduling, and coordinating work across technicians and support staff. Translates client business and mission requirements into specific system, application, and process designs for complex IT and...

Standard Job Description You will be the Production Flightline Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Flightline Team. Our team is responsible for Final flight ops and delivery to include flight operations, installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  This Position will be Mon-Thurs-4x10A schedule- 2nd shift 1500-0130 What You Will Be Doing As the Production Flightline Avionics, F-16 Technician Lvl 3 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks.  You may also be required to troubleshoot and repair electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating...

Standard Job Description   You will be the Avionics Technician Lvl 3 for the Lockheed Martin Greenville Avionics Backshop Team. Our team is responsible for building and repairing electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  ~This Position will be Mon-Thurs 4x10A Week schedule- 2nd Shift 3PM-130AM~   What You Will Be Doing   As a Backshop Avionics Technician Lvl 3 you will be responsible for building and repairing wire harnesses. Testing/installing electrical harnesses/components, routing various wire/cables, terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals....

Description SAIC is seeking an organized and motivated Senior Mechanical Engineer who is looking for an opportunity to grow with our company as we continue to expand our support in the modernization and development of various Common Aviation Command and Control System (CAC2s) designs as well as supporting production activities out of our Charleston, SC office. The ideal candidate should have experience supporting various projects at all levels showcasing leadership qualities and attributes, as well as project management skills. The candidate should have the ability to discuss projects they have supported and/or led. Candidate should be able to self-manage/self-direct projects, and communicate regularly with customers, engineers, logisticians, and technicians. Job Duties: Must be able to lead multiple high-profile projects which involve interfacing with the customer to define key test requirements, sourcing and interfacing with multiple suppliers / vendors,...

Standard Job Description You will be the Production Flightline Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Flightline Team. Our team is responsible for Final flight ops and delivery to include flight operations, installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline  Avionics, F-16 Technician Lvl 3 you will be responsible for Flight Operations, Launch and Recovery, Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: •...

Description SAIC is seeking multiple levels of Cable Fabrication Technicians to join our team in North Charleston, SC to support the USMC to perform cable fabrication work by reading and interpreting drawings, schematics, and cable run sheets to assemble cables. Job Description: Perform cable fabrication work for multiple government projects Read and interpret drawings, schematics, and cable run sheets to verify correct build of cables Assemble cables to specifications via cable run sheets and/or schematics; to include but not limited to multi-pin connectors and RF cables Assemble cable harnesses and junction box assemblies; including MIL-SPEC cylindrical connectors, back shells, terminal boxes, and radio frequency (RF) Proficient in the use, care and maintenance of crimp tools, heat gun, and various electrical and mechanical tools Maintain, troubleshoot, test and check all of the cables that are built and produced in the shop...