17 engineering technician jobs found

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility, particularly in the area of military fiber optics. Performing Fiber Optic terminations and Fiber Optic repair is the primary job role. Candidate must be able to travel and be able to work on or around military aircraft. The ability to learn and operate fiber optic termination equipment and fiber optic test equipment. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of fiber optic and copper wire harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: You will be the Facilities Representative - Level 2 for the Facilities Engineering team which is responsible for modernizing building management systems. What You Will Be Doing As the Facilities Representative - Level 2 you will be responsible for ensuring successful upgrades of control system componentry while supporting overall facility operations. "Your responsibilities will include:" Inspect controls installations to verify compliance with engineering and maintenance standards. Coordinate with Engineering and Maintenance personnel during BMS upgrade projects. Provide training and support to boiler‑house staff on new system functionalities. Create Apogee and Desigo graphics within Siemens platforms. Develop and maintain PPCL programming to enable system modernization initiatives. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn...

Description: You will be the Environmental Technician for the Environmental, Safety & Health (ESH) team. Our team is responsible for supporting the Missiles & Fire Control‑Dallas site’s hazardous waste program. What You Will Be Doing As the Environmental Technician you will support the growing and dynamic operations of the Missiles & Fire Control – Dallas site in the ongoing management and enhancement of the hazardous waste program. As part of the Environmental Safety & Health (ESH) Department, candidate will be responsible for moving and transporting waste materials, empty containers and other necessary materials throughout the facility as required by the ESH department. Your responsibilities will include: Perform segregation, pouring/transferring into drums, packaging, and loading of liquid and solid waste materials. Ensure drum count is correct, internal labels are correct, and drum conditions are shippable in accordance with...

Description: You will be the Environmental Technician for the Environmental, Safety & Health (ESH) team. Our team is responsible for supporting the Missiles & Fire Control‑Dallas site’s hazardous waste program. What You Will Be Doing As the Environmental Technician you will support the growing and dynamic operations of the Missiles & Fire Control-Dallas site in the ongoing management and enhancement of the hazardous waste program. As part of the Environmental, Safety & Health (ESH) Departments, candidate will be responsible for moving and transporting waste materials, empty containers and other necessary materials throughout the facility as required by the ESH department. Your responsibilities will include: Perform segregation, pouring/transferring into drums, packaging, and loading of liquid and solid waste materials. Ensure drum count is correct, internal labels are correct, and drum conditions are shippable in accordance with...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Electrical Design Engineer. The selected candidate will participate in the electrical design efforts for the F-16 and F-22 lines of business. Primarily function as Electrical Engineer at Fort Worth supporting test sites and local activities. The candidate will be required to perform electrical design activities for the installation of flight test instrumentation electrical components to fulfill system design block diagrams of instrumentation systems. The candidate will be responsible for developing, understanding and releasing engineering drawings, creating technical designs using CATIA, selecting and understanding electrical components, creating work instructions, monitoring fabrication activities, providing liaison support with the fabrication shop and test sites, and providing mod support. This position will be responsible for communicating and coordinating with flight test instrumentation...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Operations Engineer and System Designer. The selected candidate will participate in the development and operational efforts for the F-16 and F-22 lines of business. Primarily function as Instrumentation Operations Engineer at Fort Worth supporting test sites and local activities. Tasks will include developing instrumentation requirements, schedules, resolving equipment and sensors selection problems and detailed system design of the instrumentation data acquisition system. Develops system software/programming for proper operation and data collection. Supports lab checkout required to resolve instrumentation data acquisition anomalies. Supports daily flight test operations by assuring a test ready instrumentation system. Interacts with flight test engineers and other test engineering disciplines involved in scheduling, testing and troubleshooting during developmental aircraft flight testing....

Description: We are Lockheed Martin You will be the Pilot Subject Matter Expert (SME) and Pilot Vehicle Interface (PVI) design engineer to serve in the Pilot Systems Engineering (PSE) group specializing in the F-16 program with opportunities to support 5th Generation and Advanced Development Programs (ADP). What You Will Be Doing As the Pilot Subject Matter Expert your responsibilities will include: • Research and design of innovative PVI mechanizations and pilot / human engineering for tactical cockpits. • Provide pilot SME support in the forms of participation in design review meetings, system test and flight test reviews, customer and program support regarding aircraft capabilities and PVI. • Work with pilots, engineers, and simulation technicians to design, implement, evaluate, and document PVI mechanizations. This includes authoring and publishing Pilot’s Guides and other contract deliverables describing the enhanced aircraft capabilities. You will be expected to:...

Description: This position will serve as a Functional Manager within the Human Systems Engineering (HSE) engineering team with primary focus on leading a team of Human Factors Engineers. The manager will be required to support a team (~10 individuals) deployed across multiple Lockheed Martin Aeronautics Lines of Businesses (e.g., F-35, IFG, ADP). The Leader will be responsible for assisting in development of the strategy and vision for Human Factors Engineering efforts for future manned and unmanned platforms. The Leader will work with the multiple business areas to represent HPE in program execution (cost, schedule and technical performance), proposal activities, customer interfaces, industry engagement and L-code responsibilities (employee retention, employee recruitment, labor demand and staffing, performance assessments, and career development). The leader will also be expected to support direct program execution alongside his/her team and provide frequent coordination...

Description: You will be the Test Engineer Senior for the 2nd Shift Test Engineering team. Our team is responsible for delivering high‑quality test solutions that ensure the reliability and performance of electronic systems. What You Will Be Doing As the Test Engineer Senior you will be responsible for driving test execution, troubleshooting, and continuous improvement of test processes. Your responsibilities will include, but are not limited to: Resolve and document test anomalies of manufactured electronic circuit boards, cables, flexes, sub‑assemblies, and systems. Maintain test equipment in working order according to requirements and schedules. Prepare, review, refine, and improve test procedures and planning documents. Support test development and integration efforts, collaborating with technicians, quality engineering, and manufacturing engineering teams. Provide technical guidance and mentorship to junior test staff. Why Join Us...

Description: You will be the Manufacturing Engineer Manager (Level 5) for the Missiles & Fire Control Manufacturing Engineering – Dallas Electrical Shop PWB/PCB team. Our team is responsible for delivering high‑quality printed wiring boards (PWB) that enable mission‑critical missile systems. What You Will Be Doing As the Manufacturing Engineer Manager (Level 5) you will be responsible for leading the Electronics Fabrication effort within the Dallas Electrical Shop. Your responsibilities will include, but are not limited to: Define, implement, and continuously improve PWB manufacturing processes and work instructions. Lead a multidisciplinary team of engineers and technicians to meet schedule, quality, and cost targets. Coordinate with design, test, and supply‑chain partners to resolve fabrication issues and ensure compliance with missile‑system requirements. Drive root‑cause analysis and corrective‑action programs for non‑conformances and...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. THE WORK Provide formal instructions and assistance to perform intermediate level maintenance tasks on F-16 hydraulic system/sub-system components. Teach the student how to perform operational and functional checks and repair on F-16...

Description: You will be the Manufacturing Supervisor (1st Shift) (Level 3) for the PAC-3 Sustainment team. Our team is responsible for repair and recapitalization of fielded launcher system equipment for the US Government and partner ally nations. What You Will Be Doing As the Manufacturing Supervisor (1st Shift) (Level 3) you will be responsible for leading a union‑represented crew of 10‑20 workers on first shift, ensuring quality, schedule, and cost goals are met. Your responsibilities will include, but are not limited to: Direct daily production activities and prioritize work orders. Maintain strict quality standards and conduct root‑cause analysis. Monitor schedule adherence and adjust resources to meet milestones. Control costs through efficient labor and material utilization. Foster a safe, collaborative environment and mentor crew members. Why Join Us The ideal candidate is a decisive, collaborative leader with proven experience...

Description: You will be the Mult Func Manufacturing Supv for the Manufacturing Operations Team. Our team is responsible for delivering high‑quality, cost‑effective products on schedule in a fast‑paced environment. What You Will Be Doing As the Mult Func Manufacturing Supv you will be responsible for leading a diverse group of technicians and support staff while partnering with engineering, quality, maintenance, facilities, and ESH to meet core performance metrics. Your responsibilities will include, but are not limited to: Lead, coach, and develop a team of machinists, assemblers, welders, and painters to achieve daily production goals. Collaborate with cross‑functional partners to drive quality, cost, schedule, and safety improvements. Implement continuous‑improvement initiatives that align with customer requirements and business objectives. Monitor and report key performance indicators, ensuring corrective actions are timely and effective....

Description: We are seeking a highly experienced Staff Electrical Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 7 - 12 years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf (COTS)...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. THE WORK Provide formal instruction and assistance with aircraft launch and recovery, jacking, lifting, towing; and end-of-runway, post-flight, preflight, and thru-flight inspections. Teach the student how to perform inventories and...

Description: We are Lockheed Martin The story of aviation has always been the story of people who have the perseverance to fail, to try again, and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission results has been ingrained in our culture. We recognize the diverse talents and experiences of our team members, and we celebrate the unique contributions each individual brings to the table. It is that collective passion, combined with a strategic focus on ever-changing global opportunities, that shapes our path forward. Join us as we continue to innovate, inspire, and make history in the world of aerospace and defense. As a Completion Supervisor, you will manage crews of represented mechanics/technicians charged with the completion of aircraft build, systems testing, and operational check flights. • Ensure company, customer, engineering, and FAA specifications and...