1557 facilities jobs found

Description: Provide support to all facility related operations. Obtain/maintain forklift operating certification. Performs any or one of the following typical laboring tasks: - Digs trenches and any other excavations using picks and shovels. - Demolishes, disassembles and removes structures such as scaffolding, partitions, foundations, floors and walks using hand tools such as crow bars, sledge hammers, and other necessary tools. - Removes debris and salvage material using broom, shovel, wheel barrow or truck and loads into motor trucks. - Remove snow as needed using Shovel/Snow removal equipment. - Maintain roof drains on buildings. - Move office furniture throughout the facility using carts/dolly's and hand trucks. Must be able to obtain/maintain a DOD government security clearance at the Secret level. Basic Qualifications: Must be able to work independently or in teams. Must be able to lift, bend and perform the normal activities of a sometimes physically...

Responsibilities: NSA is seeking traffic engineers to improve traffic flow and parking for its campuses located all over the world. You'll work with master planners and project managers on traffic engineering design and planning as part of our Installation & Logistics organization, which develops facilities solutions that align with mission-driven priorities to keep the nation safe. Your responsibilities may include: - Developing traffic designs, construction plans and specifications, including design analysis, calculations and cost estimates. - Conducting field investigations or studies and writing reports. - Preparing architecture-engineer (A-E) or design-build statements of work, performance requirements and cost estimates. - Performing design quality control of in-house and A-E traffic designs. - Conducting inspections of projects under construction, reviewing construction submittals, answering contractor RFIs and validating as-constructed drawings. - Performing...

Responsibilities: NSA is seeking structural engineers who have experience in new building design, renovation design, facility infrastructure support systems, materials selection, construction inspection, load analysis and facility structural integrity. Our Structural Engineers are responsible for the planning, design, construction, sustainment, and decommissioning life cycle of NSA facilities worldwide. You'll work on a multi-disciplined team in our Installation & Logistics organization, which develops facilities solutions that align with the agency's mission-driven priorities to keep the nation safe. Your responsibilities may include: - Developing structural designs, construction plans and specifications, including design analysis, calculations, and cost estimates. - Conducting field investigations or studies and writing reports. - Preparing Architecture-Engineer (A-E) or Design-Build statements of works, performance requirements, and cost estimates. - Performing Design...

Description: You will be the Facilities Maintenance Associate Manager - Level 4 for the Facilities Maintenance team which is responsible for managing plant facilities, infrastructure, and equipment on a large‑scale production campus. What You Will Be Doing As the Facilities Maintenance Associate Manager - Level 4 you will be responsible for overseeing all aspects of facility operations, maintenance planning, and workforce leadership. Supervise and develop trade personnel and salaried staff, handling recruitment, training, performance assessments, work assignments, and recognition/disciplinary actions. Manage production machinery and equipment, directing emergent, corrective, and preventative maintenance activities. Plan, schedule, and allocate department resources to ensure priority projects are completed on time and within budget. Ensure compliance with safety, environmental, design, and build requirements while applying appropriate policies and...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems (RMS), we design, develop and deliver some of the most advanced technologies in the world. Our teams are comprised of members with different backgrounds and skillsets who together drive visionary thinking through innovation and integrity. THE WORK The Facilities Project Specialist role provides daily support for the Facilities Maintenance, Engineering and Occupancy planning teams. This role leverages procurement expertise, basic occupancy planning, and cutting-edge Excel capabilities to optimize space utilization, budget forecasting/tracking, and asset inventory. • Procurement - Prepare and/or assist with purchase requisitions (PRs), and track order status through receipt and invoice reconciliation. Maintain a vendor database, track contract expirations, and ensure compliance with corporate purchasing policies. • Occupancy Planning & Space Management - Assist the Occupancy team with basic...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The Payload Launch Sites Support Services (PLSSS) Program provides all launch...

Description: The design team member will support design and construction of Weapons System Infrastructure & Capabilities (WSIC) projects to include major facility modifications, construction projects, and support equipment installation projects for the Trident II missile. During Design, the design team member will develop and review facility engineering design packages, including drawings and sketches, technical specifications, and cost estimates. Facility project designs will be evaluated for compliance with engineering principles and best practices, company standards and policies, customer contract requirements, and relevant specifications and regulations. During construction, the design team member will review and interpret construction plans and specifications to ensure alignment with design intent. Regular site visits will be conducted to verify that constructed facilities meet design specifications and company requirements. Any construction deviations or deficiencies...

Basic Qualifications Requires a Bachelor’s or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 5+ years of job-related experience, or a Master's degree with 3+ years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Put your engineering talent to the ultimate test. At General Dynamics Mission Systems, we create the technologies, products and services that help our service members, intelligence analysts and first responders keep our nation safe. The work we do is so advanced our...

Description SAIC is looking for an experienced Facilities Electrical Engineer to join a versatile team supporting our customer's global portfolio of mission critical facilities. This role involves providing technical engineering insight, leading complex design and construction projects, and ensuring the reliability of existing electrical and control systems. The position is located in Chantilly, VA and requires an active TS/SCI clearance with Polygraph. In this enterprise-level role, you will be a key contributor to our engineering team. You will be collaborating with a range of stakeholders, including the Government customer, project and construction managers, contractors, utilities, and other personnel, to ensure success across various electrical projects and challenges. Other Key Responsibilities: Analyze, investigate, and document facilities electrical and controls issues while keeping the Government customer well-informed on all concerns and solutions. Review...

Description SAIC is seeking a highly motivated and results-driven Project Manager to join our team supporting critical government programs. This role requires a proven track record in project management, technical oversight, and stakeholder coordination, with responsibilities that include planning, managing, and executing complex projects while adhering to stringent schedules, budgets, and quality standards. The successful candidate will provide comprehensive program management, facilities planning, cost estimation, and technical administration, ensuring compliance with established procedures and contractual requirements. Collaboration with diverse stakeholders and the application of advanced analytical and program management competencies will be critical to ensure the successful delivery of mission-critical projects. Key Responsibilities Develop project plans, including objectives, timelines, deliverables, and resource requirements, ensuring compliance with government...

Description SAIC is seeking a top-notch Facilities Project Manager/Data Analyst to join our talented team in Springfield, VA. This role requires an active TS/SCI clearance with Polygraph. SAIC provides full-service facility management oversight to a major organization in the Intelligence Community (IC). We conduct end-to-end project management, facility engineering, and technical support for project execution, facility operations and maintenance, strategic planning, and budget planning. Project Manager (60%): This position is responsible for providing the project and programmatic management expertise for the coordination, planning, management, prioritization, and execution of projects for the Client, ranging in value from $5K to $30M. In this role you will serve as an interface between the Client, stakeholders, Site Operations and Maintenance (O&M) team, customers, and the construction/design contractor on all project matters. Responsibilities include: Act as the...

Description: WHAT WE’RE DOING We are seeking a highly skilled and experienced Senior Reliability Engineer to join our team at Lockheed Martin’s Moorestown, NJ facility. In this critical role you will design and implement reliability‑focused programs that elevate the performance of our campus‑wide infrastructure, systems, services, and equipment. By applying data‑driven maintenance strategies, you will maximize asset reliability, reduce operational risk, and deliver measurable cost savings across the site. This position offers the opportunity to lead reliability initiatives that directly impact on the efficiency and resilience of one of our flagship facilities. THE WORK The Facilities Maintenance Reliability Engineer will be responsible for: Developing and implementing Asset Management improvement programs, including: Asset criticality identification Risk assessment and mitigation Asset condition auditing Preventive and condition maintenance programs Predictive strategies...

Description SAIC is seeking a Facilities Project Manager with expertise in mechanical systems to support our mission in Alice Springs, AU . This position requires the ability to obtain a TS/SCI clearance with Polygraph prior to starting in the role. US Citizenship is required by federal law. SAIC provides full-service facility management support to a major organization in the Intelligence community. We conduct end-to-end project management and facility engineering functions for locations throughout the world. At the HQ-level we perform all manner of planning, programming, and execution oversight for a portfolio in the hundreds of millions per year. In this role, you will serve as an interface between the on-site government facilities management organization, design and construction contractors, Site Operations and Maintenance (O&M) support contractor, local utilities and all other customers and stakeholders on matters related to customer requirements, project...

Basic Qualifications Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Electrical Facilities Design Lead Position Overview As the Electrical Facilities Design Lead , you and your team will be responsible for guiding multiple electrical facilities subsystems and their components from concept to final installation in a program that introduces...

Basic Qualifications High School Diploma or the equivalent is required.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Key Responsibilities:  Office and Facility Operations Receives, inspects, and logs incoming materials and deliveries; coordinates with engineering staff to ensure proper disposition. Packs and prepares materials for outbound shipment in support of direct program activities. Processes and tracks shipping requests, coordinating with freight carriers and internal stakeholders. Maintains and restocks office supplies, breakroom...

Description SAIC is seeking a Facilities Engineer with expertise in mechanical systems to support our mission in Alice Springs, AU. This position requires an active TS/SCI clearance with Polygraph to be considered. SAIC provides full-service facility management support to a major organization in the Intelligence community. We conduct end-to-end project management and facility engineering functions for locations throughout the world. At the HQ-level we perform all manner of planning, programming, and execution oversight for a portfolio in the hundreds of millions per year. In this role, you will serve as an interface between the on-site government facilities management organization, design and construction contractors, Site Operations and Maintenance (O&M) support contractor, local utilities and all other customers and stakeholders on matters related to customer requirements, project prioritization and execution. You will be responsible for overseeing the five phases...

Description: This position is for a Senior Facilities Engineer supporting Lockheed Martin operations in a production environment at the NASA Kennedy Space Center in Florida. This individual will participate in management of calibration and precision cleaning as well as maintenance and repair of Orion mechanical ground support equipment at KSC. Responsibilities will also include working extensively in SAP software to ensure service orders, production orders, work orders, maintenance notes that capture problems or corrective action, and strategies are developed, released, dispositioned and closed. Individual will also be required to generate electronic material requests and track material receipts. Basic Qualifications: • Experience managing maintenance of Mechanical Ground Support Equipment • Experience with documenting and disposition of failed or non-conformance equipment • Experience with fluid systems (liquids and gases) • Ability to effectively communicate and...

Description: The design team member will support design and construction of Weapons System Infrastructure & Capabilities (WSIC) projects to include major facility modifications, construction projects, and support equipment installation projects for the Trident II missile. During Design, the design team member will develop and review facility engineering design packages, including drawings and sketches, technical specifications, and cost estimates. Facility project designs will be evaluated for compliance with engineering principles and best practices, company standards and policies, customer contract requirements, and relevant specifications and regulations. During construction, the design team member will review and interpret construction plans and specifications to ensure alignment with design intent. Regular site visits will be conducted to verify that constructed facilities meet design specifications and company requirements. Any construction deviations or deficiencies...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We believe that by applying the highest standards of business ethics and creative thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK Support the Sikorsky Facilities Design, Construction, and Engineering organization by managing the engineering design for major projects and rearrangement activities across four Connecticut sites, encompassing a total of approximately 3 million square feet. Assist in the preparation and monitoring of project schedules and costs, ensuring adherence to the established project budget and spend profile for design efforts. Coordinate and oversee the bidding and procurement processes for all design efforts in collaboration with established consulting firms. Provide technical guidance and support...