24 test technician jobs found

Description: You will be the Field Service Technician (FST) for the HIMARS Support Team. Our team guarantees that the HIMARS family of medium tactical vehicles (launchers, RSVs, wreckers, trailers, and material handling equipment) operate flawlessly for the Taiwanese Army, from initial assembly through sustainment. What You Will Be Doing As the Field Service Technician you will be the primary point of contact for the Taiwan HIMARS Battalion’s launcher operations, maintenance, and troubleshooting. You’ll work side by side with Taiwanese military personnel and U.S. contractors, delivering hands on support, training, and technical expertise throughout a two year, unaccompanied overseas assignment. Your responsibilities will include: • Diagnose, repair, and calibrate HIMARS launchers, RSVs, wreckers, trailers, and associated equipment in the field and at sustainment levels. • Conduct operator and maintainer refresher training using existing curricula; develop on the spot...

Description: You will be the Technician Calibration Specialist for the Metrology Team. Our team is responsible for delivering precise measurement solutions that support critical mission systems. What You Will Be Doing As the Technician Calibration Specialist you will be responsible for ensuring the accuracy and reliability of a wide range of measuring instruments. Your responsibilities will include, but are not limited to: Calibrate, adjust and maintain electronic, electromechanical, mechanical, and torque measuring/indicating instruments to conform to set standards. Interpret written instructions and apply technical knowledge to perform calibrations. Research and develop calibration methods, procedures, and automated calibration software. Prepare calibration data reports, data sheets, and required documentation. Resolve issues by interfacing with customers, vendors, and management, and monitor quality using statistical process controls....

Description: Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE). Requires sound knowledge of precision measurement methodologies and principles. Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency. Must have an understanding of measurement traceability and be competent interpreting and converting specifications. Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed. Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements. Basic Qualifications: Experience with the use of precision measuring principles, theories and units of...

Description: You will be the CNC Electrical Technician for the Electrical Controls Team. Our team is responsible for ensuring the reliability and performance of advanced automation equipment across production, research, and development environments. What You Will Be Doing As the CNC Electrical Technician you will be responsible for installing, modifying, and maintaining a wide variety of electrical and electronic systems that drive our CNC, PLC, robotics, and other automated machinery. Your responsibilities will include, but are not limited to: Install, modify, and repair CNC, PLC, and robotic control hardware and associated wiring according to schematics, service manuals, and performance specifications. Perform preventative maintenance and detailed troubleshooting using calibrated laser, ball‑bar, and other precision test equipment. Diagnose and resolve complex electrical issues with laptops, test instruments, and diagnostic software. Mentor and...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: You will be the CNC Electrical Technician for the Electrical Controls Team. Our team is responsible for ensuring the reliability and performance of advanced automation equipment across production, research, and development environments. What You Will Be Doing As the CNC Electrical Technician you will be responsible for installing, modifying, and maintaining a wide variety of electrical and electronic systems that drive our CNC, PLC, robotics, and other automated machinery. Your responsibilities will include, but are not limited to: Install, modify, and repair CNC, PLC, and robotic control hardware and associated wiring according to schematics, service manuals, and performance specifications. Perform preventative maintenance and detailed troubleshooting using calibrated laser, ball‑bar, and other precision test equipment. Diagnose and resolve complex electrical issues with laptops, test instruments, and diagnostic software. Mentor and train...

Description: Why Join Us We are seeking a high‑energy Technical Team Lead to take charge of an existing, mid‑stage test‑system development effort and lead a focused team of 4‑7 engineers through the remaining design, integration, prototyping, EMI qualification, and verification phases. Requirements are fully defined; the lead will drive the implementation of RF, software (LabVIEW-based) and hardware architectures, manage rapid hardware‑software prototyping, and ensure rigorous verification against system‑level test specifications. In addition to overseeing configuration control and continuous‑integration processes, the role carries full Cost Account Manager (CAM) responsibility under EVMS and requires frequent briefings and presentations to senior leadership and the U.S. Government customer. This fast‑paced, high‑visibility assignment offers significant growth potential for a self‑motivated technical leader. From onsite to remote, we offer flexible work schedules to...

Description: Why Join Us We are seeking a high‑energy Technical Team Lead to take charge of an existing, mid‑stage test‑system development effort and lead a focused team of 3-4 engineers through the remaining design, integration, prototyping, EMI qualification, and verification phases. Requirements are not fully defined; the lead will drive the implementation of RF, software (LabVIEW-based) and hardware architectures, manage rapid hardware‑software prototyping, and ensure rigorous verification against system‑level test specifications. In addition to overseeing configuration control and continuous‑integration processes, the role requires frequent briefings and presentations to senior leadership and the U.S. Government customer. This fast‑paced, high‑visibility assignment offers significant growth potential for a self‑motivated technical leader. From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Calibration Engineer to join our team in Dallas, TX. The RF Seeker Calibration Engineer is responsible for the calibration, testing, characterization, and performance validation of Radio Frequency (RF) seekers used in radar-guided systems, such as missiles, drones, or other precision-guided munitions. This role ensures that RF seekers (active, semi-active, or passive radar homing systems) meet stringent accuracy, reliability, and performance requirements through precise calibration procedures, data analysis, and troubleshooting in laboratory, anechoic...

Description: You will be the Technical Publications Writer for the Technical Publications team. Our team is responsible for creating and maintaining mission critical technical documentation that meets Military Specifications, delivering Interactive Electronic Technical Manuals (IETMs), Depot Maintenance Work Requirements (DMWRs), Repair Parts & Special Tools Lists (RPSTLs), and high quality procedural graphics to support system sustainment and readiness. What You Will Be Doing As the Technical Publications Writer you will be responsible for translating complex engineering data into clear, usable documentation that enables technicians and maintainers to work efficiently and safely. You’ll work side by side with Subject Matter Experts across engineering disciplines, manage content in our configuration controlled system, and ensure every deliverable is on time, on budget, and compliant with MIL STDs. Your responsibilities will include: • Drafting, updating, and publishing...

Description: We are Lockheed Martin You will be a Pilot Trainer Developer. Our team is responsible for the development of training requirements and implementation of courseware to instruct Aircrew/Mission Planner functions, including simulation and scenarios used for customer training. You will be responsible for developing and instructing highly creative training courses for existing and new systems. What You Will Be Doing Your responsibilities will include: • Developing and instructing highly creative training courses for existing and new systems. • Provide all training to customer personnel at various locations. • Provide Pilot and Combat Systems Operator support to brief and train test pilots, production pilots, and systems engineers on Aircraft and Ground Systems capabilities and operations. • Collaborate with pilots, engineers, and simulation technicians to design, implement, evaluate, and document training and technical publications. You must have experience in...

Description: You will be the Test Engineer Senior for the 2nd Shift Test Engineering team. Our team is responsible for delivering high‑quality test solutions that ensure the reliability and performance of electronic systems. What You Will Be Doing As the Test Engineer Senior you will be responsible for driving test execution, troubleshooting, and continuous improvement of test processes. Your responsibilities will include, but are not limited to: Resolve and document test anomalies of manufactured electronic circuit boards, cables, flexes, sub‑assemblies, and systems. Maintain test equipment in working order according to requirements and schedules. Prepare, review, refine, and improve test procedures and planning documents. Support test development and integration efforts, collaborating with technicians, quality engineering, and manufacturing engineering teams. Provide technical guidance and mentorship to junior test staff. Why Join Us...

Description: What You Will Be Doing: F-16 Technical Publications Author - Level 1 Location: Fort Worth TX What You Will Be Doing As an F-16 Technical Publications Author – Level 1, you will play a key role in developing and maintaining mission-critical documentation that supports one of the world’s most advanced fighter aircraft. You will transform complex engineering data into accurate, easy-to-understand maintenance and operations manuals used by technicians and flight crews globally. This position is ideal for individuals with a strong understanding of aircraft systems and a passion for technical writing. You’ll collaborate with cross-functional teams, contribute to international defense efforts, and help ensure the readiness and success of the F-16 fleet. Key Responsibilities - Develop and author accurate, clear, and user-friendly maintenance instructions and technical publications for the F-16 aircraft. - Interpret and incorporate engineering data, drawings,...

Description: What You Will Be Doing: F-16 Technical Publications Author - Level 1 Location: Fort Worth TX What You Will Be Doing As an F-16 Technical Publications Author – Level 1, you will play a key role in developing and maintaining mission-critical documentation that supports one of the world’s most advanced fighter aircraft. You will transform complex engineering data into accurate, easy-to-understand maintenance and operations manuals used by technicians and flight crews globally. This position is ideal for individuals with a strong understanding of aircraft systems and a passion for technical writing. You’ll collaborate with cross-functional teams, contribute to international defense efforts, and help ensure the readiness and success of the F-16 fleet. Key Responsibilities - Develop and author accurate, clear, and user-friendly maintenance instructions and technical publications for the F-16 aircraft. - Interpret and incorporate engineering data, drawings,...

Description: You will be the Machine Repair Mechanic for the Maintenance Team. Our team is responsible for maintaining, overhauling, and repairing a wide range of hydraulic, mechanical, pneumatic, and electronically controlled factory machine tools and equipment. What You Will Be Doing As the Machine Repair Mechanic you will be responsible for ensuring operational readiness of critical machinery, diagnosing issues, and leading repair activities. Your responsibilities will include, but are not limited to: Diagnose, dismantle, and repair hydraulic, mechanical, pneumatic, and electronic machine tools. Perform overhauls and install additional equipment such as coolant pumps and lubrication systems. Lead and instruct one to two mechanics on assigned jobs. Maintain and modify liquid and gaseous oxygen and nitrogen carts, gauges, test benches, and storage tanks. Keep the work area clean, orderly, and compliant with safety standards. Why Join Us...

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: You will be the Physical Security Emerging Technology Lead for the Missiles and Fire Control (MFC) Security team. Our team is responsible for managing core security platforms, ensuring compliance, and driving physical security strategy across the business area. What You Will Be Doing Lockheed Martin MFC Physical Security Emerging Technology Lead is the subject matter expert and chief systems administrator for the business’s core security platforms—access control, video management, and intrusion detection, among many others. You will ensure that enterprise security standards are consistently applied and effectively integrated across every MFC site. You will also oversee high visibility corporate-wide projects to introduce large scale emerging technology and systems, consolidate and streamline current operations, and keep pace with the business’ multi-billion dollar investment in facilities master planning. Success will look like ensuring MFC Security operations...

Description: We are seeking a highly experienced Senior Staff Automated Test Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 12+ years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf...

Description: You will be the Manufacturing Supervisor for the Production Operations Team. Our team is responsible for delivering high‑quality products while driving continuous improvement in a fast‑paced manufacturing environment. What You Will Be Doing As the Manufacturing Supervisor you will be responsible for leading a union represented work force as well working cross-functionally with support staff to meet safety, quality, cost, and schedule goals. Your responsibilities will include, but are not limited to: Job Description : You will be the Manufacturing Supervisor for the Tooling and Test Sets team. Our team is responsible for delivering high quality, on time production of aerospace components across multiple programs. What You Will Be Doing As the Manufacturing Supervisor you will be responsible for leading a union represented crew of 10-20 workers on first shift, ensuring quality, schedule, and cost goals are met. Your responsibilities will include, but...

Description: You will be the Pilot Vehicle Interface Design Engineer - Level 4 for the Pilot Systems Engineering (PSE) group – Advanced Development Programs (ADP) which is responsible for designing and delivering innovative pilot vehicle interface solutions for advanced aircraft. What You Will Be Doing As the Pilot Vehicle Interface Design Engineer - Level 4 you will be responsible for shaping next‑generation cockpit mechanisms and ensuring they meet mission needs. This is a non-flying position. Your responsibilities will include: - Researching, designing, and constructing mockups of PVI mechanizations for tactical cockpits and presenting them to customers. - Designing, simulating, and refining PVI solutions for controls, displays, sensors, weapons, and air‑vehicle subsystems. - Collaborating with pilots, engineers, and simulation technicians to implement, evaluate, and document PVI designs. - Providing subject‑matter‑expert support to brief and train test pilots,...