48 aircraft electrical electronics mechanic jobs found

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: You will be the Aircraft Electrical & Electronics Mechanic - C130 for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - C130, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and overall...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 2 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 2 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 3 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel,...

Description: You will be the Production Hangar Avionics F-16 Technician for the Lockheed Martin Greenville Production Team. Our team is responsible for production line, installs of electrical harnesses/wires, continuity testing, and soldering/termination operations. What You Will Be Doing As the Production Hangar Avionics F-16 Technician you will be responsible for installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat,...

Description: Electrical Engineer - Systems Integration/Test - Level 4 We are Lockheed Martin The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops. Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and...

Description: You will be the Flight Line Electrician - C130 for the team which is responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service complex aircraft electrical systems equipment. What You Will Be Doing As the Flight Line Electrician - C130, you will be responsible for mocking up, fabricating, and installing experimental systems and equipment and performing final flight-servicing, troubleshooting, and operational checkout before and after flight to ensure airworthiness and conformance to applicable design specifications. Your responsibilities will include: Conducting power plant runs or working with mechanics in conducting such runs; making adjustments and replacements of electrical components and accessories Investigating any malfunctioning of electrical equipment before and after flight test; analyzing systems and diagnosing trouble Performing necessary operations to correct trouble,...

Description: As an Electronics Maintenance Technician, you will be responsible for: • The Electronics Technician II inspects, analyzes, troubleshoots, maintains, repairs, and advises on problems operating and maintaining aircraft Electronic Warfare, Guidance and Control, Communication/Navigation, and Electrical and Environmental systems, associated components, subsystems, and test equipment on C-130 aircraft. • Ensures aircraft are in good mechanical condition and systems are operating and functional for flight. • Analyzes equipment operating characteristics to isolate malfunctions in avionics systems, integrated test systems built-in-test (BIT), multiplexed data bus systems, recording systems, video display systems, mission computer systems, electronic warfare (EW) systems, and sensors. • The Technician applies comprehensive technical knowledge to solve complex problems by interpreting Air Force Technical Orders, manufacturers’ manual, or similar documents. • Solves...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Description: You will be the Systems Engineer - Level 3 for the Vehicle Systems Electronics, Integration & Labs team which is responsible for delivering cutting‑edge functional test solutions for legacy and next‑generation combat aircraft. What You Will Be Doing As the Systems Engineer you will be responsible for designing, testing, and managing functional test solutions—including custom harnesses, fixtures, and flying hardware—across multiple sustainment and production contracts. Your responsibilities will include: Design and develop functional test solutions, including custom harnesses, fixtures, and flying hardware for C‑130, C‑5, F‑22, F‑35, and F‑16 platforms. Evaluate airframe, avionics, and mission‑system specifications to create test strategies and define clear pass/fail criteria. Manage test‑infrastructure data in SAP/ERP to control Bills of Materials and ensure full traceability. Identify, qualify, and coordinate with aerospace‑grade...

Description: We are Lockheed Martin • Works independently or leads a team to execute project, schedule, and technical requirements to meet the goals of the test program. • Responsible for specification, selection, design, integration, operation and maintenance of airborne data acquisition systems, and their related components. This includes telemetry, flight test specific hardware, or prototypes for flight test evaluation. • Oversee installation, checkout, and calibration of data systems, to ensure collected data can be properly displayed, processed, and analyzed. • Maintain configuration control, and mission capability of the instrumentation system as well as all associated ground support equipment. • Support preflight, post-flight, and control room activities for all scheduled mission. • Interface with test ops, maintenance, and management to ensure all instrumentation requirements are coordinated and accounted for. • Support occasional travel. A level 3 employee...

Description: You will be the Quality Inspector for the SOF GLSS team. Our team is responsible for delivering high‑quality inspection, testing, and sustainment services that support the Special Operations Forces – Global Logistics Support Services (GLSS) contract. What You Will Be Doing As a Quality Inspector your responsibilities will include: • Inspection/verification of electrical/electronic harnesses, components, cables including fiber optics, tubing, aerospace vehicles cables, electrical assemblies such as circuit panels, solder inspections, dimensional check of aircraft assemblies, subassemblies, and installations of harnesses into aircraft for adequate routing during initial modification install to preliminary or released engineering technical documents. To assure all clearances are maintained between tubing, harnesses and structure as required by contractual specifications • Inspection of structural, hydraulic, pneumatic, mechanical, flight control assemblies,...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Test Engineer within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) testbed devices for software and hardware development. We integrate new hardware configurations into PTD testbeds in Orlando to allow development engineers to verify and validate new capabilities for the deliverable...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 1 Test Engineer within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) testbed devices for software and hardware development. We integrate new hardware configurations into PTD testbeds in Orlando to allow development engineers to verify and validate new capabilities for the deliverable...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) which is responsible for delivering cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for applying deep technical expertise to solve complex wiring and power‑distribution challenges while partnering closely with systems, mechanical, structural, and integration teams. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power‑distribution systems. Translate electrical specifications into clear routing diagrams, cable layouts, and detailed installation procedures, coordinating with cross‑functional teams. Create and maintain comprehensive wiring‑harness documentation, support prototype builds, troubleshoot integration issues, and manage change requests. Develop supplier statements of work and oversee system check‑outs to...

Description: You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a First shift position on a 4x10A work schedule What’s In It...

Description: You will be the Systems Engineer (Radar/EW) – Level 3 for the Radar/EW Systems Engineering team which is responsible for delivering advanced RF engineering solutions across the full aircraft lifecycle. What You Will Be Doing As the Systems Engineer (Radar/EW) – Level 3 you will be responsible for applying RF engineering expertise to design, develop, integrate, produce, and sustain cutting‑edge radar and electronic‑warfare systems. Your responsibilities will include: Performing RF analysis, modeling, and testing to support system design and performance verification. Integrating radar/EW subsystems into aircraft platforms using Model‑Based Systems Engineering (MBSE) practices. Collaborating with cross‑functional teams to transition designs from development through production and sustainment. Applying digital engineering tools to create and maintain accurate system models and documentation. Ensuring compliance with security and...

Description: We are Lockheed Martin We are seeking a highly experienced Principal Project Engineer to lead and manage C130 new development and modernization efforts. You will function as part of the AMMM Project Engineering team responsible for delivering complex system development products and solutions. What You Will Be Doing As a Principal Project Engineer Manager your responsibilities will include: • Be the technical leader solving new development opportunities or modernized solutions of an integrated and complex system/technical development from concept, through design, implementation, test, manufacturing/deployment and sustainment. • Ensure alignment with Engineering and Technology strategy, business development, program architect, technical feasibility. • Drive planning, technical performance measures, trade studies, risk evaluations, across all Engineering Teams to meet contract cost, schedule, and technical requirements. Lead and manage engineering teams to...

Description: Who we are Lockheed Martin is a global leader in aerospace, defense, and technology solutions. Our Owego campus is a thriving center of engineering expertise, fostering a culture that encourages creativity, excellence, and the creation of exceptional products. Our team is made up of dedicated professionals who are passionate about pushing the boundaries of what's possible. What We’re Doing At Lockheed Martin, we're at the forefront of cutting-edge technology and innovation. Our campus in Owego, New York is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. We pride ourselves on our culture of creativity, excellence, and product innovation. The Work This full-time position is located in Owego, NY. Candidate will be specializing in Structural and Thermal analysis, design, and validation work on various military avionics hardware programs. This role will require mechanical analysis skills, knowledge of...