107 electronics jobs found in Fort Worth, TX

Description: You will be the Manufacturing Engineer Sr. (Electronics Fabrication, Level 3) for the Missiles and Fire Control Manufacturing Engineering team. Our team is responsible for supporting sustainment re‑cap, re‑certification (MRO), and Customer Field Service (CFS) for missile systems. What You Will Be Doing As the Manufacturing Engineer Sr. you will be responsible for developing and maintaining manufacturing processes, work instructions, and risk‑mitigation plans while driving cost‑reduction initiatives. Your responsibilities will include, but are not limited to: Create and maintain work instructions, task lists, and re‑work/repair procedures for circuit card assemblies, harnesses, and electromechanical sub‑assemblies. Identify production risks, develop mitigation plans, and lead validation activities on the shop floor. Drive cost‑reduction projects to closure and support testing, tooling, and hardware issue resolution. Lead...

Description: The future of aerospace is built by engineers who can bridge the gap between mechanical design and advanced electronics. At Lockheed Martin Aeronautics, we’re looking for a Senior Mechanical Engineer to help design and integrate mission-critical electronic hardware for advanced aircraft systems. In this role, you’ll work on ruggedized avionics, embedded hardware, and electro-mechanical systems that support some of the most sophisticated aerospace technology in the world. If you enjoy solving complex hardware challenges, collaborating across engineering disciplines, and seeing your designs support real-world missions, this opportunity was built for you. What You Will Be Doing As the Mechanical Engineer - Level 3 you will be responsible for delivering robust mechanical solutions that enable the EHD team’s mission‑critical hardware to perform flawlessly in aerospace environments. Your responsibilities will include: Design and analyze mechanical...

Description: You will be the Electronic Test Tech/Inspector for our team. Our team is responsible for ensuring the quality and integrity of our electronic systems through rigorous testing and inspection, implementing and developing procedures to verify product functionality. What You Will Be Doing As the Electronic Test Tech/Inspector, you will be responsible for performing tests, inspections, and verifications of our manufactured or purchased hardware, utilizing a wide range of techniques and equipment to ensure compliance with industry standards and contractual requirements. Your responsibilities will include: -Performing tests, inspections, and verifications of hardware using various techniques, such as visual examination, dimensional measurement, and electronic testing equipment -Conducting product verifications to required specifications, procedures, and industry standards -Maintaining records and logs, and performing general and periodic surveillance of work and storage...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Sr Staff EW RF Payload Design Engineer. What You Will Be Doing Lockheed Martin seeks an Electronic Warfare (EW) RF Payload Design Engineer and Technical Lead to support advanced EW decoy system development. The role will drive RF architecture, design, integration, test, and verification for EW payloads that must operate in hostile, spectrum congested environments while supporting tactical Link 16, M code GPS, and navy blue force requirements. This is a significant effort that will develop, integrate and fly multiple EW RF payloads simultaneously for...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: Architects and designs Radio Frequency systems and circuitry. Designs and develops RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers. Responsible for hardware layout, component evaluation, prototype construction, and test. Prepares test methods and specifications; analyzes and tests RF hardware to verify performance characteristics. Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase. In addition, develops RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers, RF conversion elements and transmission line equipment. Performs link analysis and optimization, including effects of propagation medium and possible interference sources. Develops and allocates RF system and subsystem functional and performance requirements....

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Aeronautics in Fort Worth, Texas is seeking a full-time Early Career RF Engineer. In this role, you will support Communication Navigation Identification (CNI) system integration, and support lab and Flight Test verification of...

Description: The RF Engineer will be a key member of the Mission Systems ADP engineering team, responsible for the hardware‑centric design, analysis, integration, testing, and sustainment of high‑performance radio‑frequency (RF) subsystems. This role focuses on developing and validating physical RF hardware to ensure that all solutions meet the stringent performance, reliability, and security requirements of DoD customers. Basic Qualifications: U.S. Citizenship (must be able to obtain or maintain a Secret clearance) Bachelor’s degree in Electrical, Microwave, or RF Engineering (or equivalent experience) Security clearance (Secret or higher) Desired Skills: Mission Systems Hardware Development Hardware integration Excellent written & oral communication Problem‑solving ability Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret with Investigation or CV date within 5...

Description: This role requires management of electronic hardware for Mission Systems products and/or mission computing. You will be expected to have experience and/or knowledge with product development, electronic hardware and software, subsystem design, integration, test and verification from hardware/software perspectives. Basic Qualifications: • A degree in Electrical Engineering, Computer Engineering, Systems Engineering, related technical degree, or relevant work experience • Experience with avionics product development Desired Skills: • Past experience with processor hardware for military applications or avionics development is strongly desired. • Technical Lead experience leading multiple team members with the development of processor hardware is a plus. • Experience with leading a technical team in avionics development is a plus. • Proficient with Microsoft Office products including spreadsheet, scheduling and database applications • Experience and aerospace related...

Description: You will be the RF Engineer Staff for the F35 System Integration Labs (SIL) F-35 Emitter Development (EMDEV) team which is responsible for ensuring the lab has the capabilities to allow testing of operational flight programs on multiple sensors. What You Will Be Doing As the RF Engineer Staff you will be responsible for developing EW emitter definitions and waveforms, creating realistic EW simulations, and supporting lab integration and testing to achieve verification milestones. Your responsibilities will include: Develop electronic warfare emitter definitions and waveforms for the EW Stimulator. Provide technical assistance for system requirements, design, integration, and validation. Engage with simulation software, hardware development, and subsystem procurement teams. Perform verification and validation activities on the EW Stimulator with radar systems. Create software tools and support mission‑system testing as needed. What’s In It...

Description: You will be the Electrical Engineer Sr for the Simulation and System Labs (SSL) team which is responsible for designing and delivering advanced simulation hardware lab environments. What You Will Be Doing As the Electrical Engineer Sr you will be responsible for leading the electrical design effort that enables realistic simulation and hardware‑in‑the‑loop lab capabilities. Your responsibilities will include: Develop and document wiring schematics, 2D drawings, parts lists, and configuration control for lab equipment. Perform systems requirements, estimation, and EVMS status coordination to meet cost and schedule targets. Coordinate procurement, vendor engagement, and fabrication liaison for power distribution and avionics interfaces. Oversee hardware checkout, troubleshooting, and integration of Man‑In‑The‑Loop and Hardware‑In‑The‑Loop systems. Provide Earned Value Management inputs and collaborate across hardware, systems, and...

Description: You will be the Mechanical Engineer Sr for the Simulation and Systems Labs (SSL) team which is responsible for designing and delivering advanced simulation hardware lab environments. What You Will Be Doing As the Mechanical Engineer Sr you will be responsible for leading the mechanical design effort that enables realistic flight‑simulation testing. Your responsibilities will include: Lead mechanical 3D modeling and 2D drawing development for simulation hardware labs. Coordinate procurement, vendor engagement, and fabrication liaison for lab infrastructure. Oversee installation, checkout, and integration of HITL avionics and simulation equipment. Provide Earned Value Management inputs and collaborate across hardware, systems, and operations teams. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s...

Description: You will be the Electrical Engineer (Weapons Integration) for the Weapons Integration Team which is responsible for integrating and validating advanced weapon systems on aircraft platforms. What You Will Be Doing As the Electrical Engineer (Weapons Integration) you will be responsible for driving the design, test, and certification of weapon system integrations on the F‑35. You will collaborate with cross‑functional engineers, develop technical documentation, and assess safety impacts of design changes. Your responsibilities will include: Develop and execute system design, test plans, and certification strategies for weapon integrations. Perform integration, test, and evaluation activities, capturing results and recommending solutions. Maintain and update technical documentation, including design files, test reports, and certification records. Identify, analyze, and mitigate safety risks associated with weapon system modifications....

Description: We are Lockheed Martin This position is for a flight test electrical design engineer. The selected candidate will support the Flight Test team working across F-16 and F-22 lines of business. The candidate will be required to perform electrical design activities for the installation of flight test equipment and data system components. The candidate will be responsible for releasing engineering drawings, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operation. Responsibilities for this position include: • Development, installation oversight, and validation of electrical designs. • Coordination with suppliers, internal and external integrated product teams, management, and the customer. • Technical engineering support for installation and testing at CONUS and OCONUS locations. • Engineering liaison for flight test and instrumentation modification...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer Senior for the Aeronautics team which is responsible for advancing cutting‑edge aircraft technologies. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer Senior you will be responsible for leading requirements development, tracking, and verification testing of systems, and overseeing electromagnetic compatibility testing of developmental and deployable systems on flight‑test fighter platforms. "Your responsibilities will include:" Lead requirements development, tracking, and verification testing for system‑level projects. Conduct platform‑level Electromagnetic Compatibility (EMC) testing and develop test procedures for flight‑test modifications. Perform RF and antenna analysis, including COSITE assessments, antenna radome performance, and RF/fiber‑optic cabling evaluations. Oversee electromagnetic radiation hazard (EMRADHAZ) assessments and...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer- Level 2 for the Electromagnetic Environmental Effects (E3) team which is responsible for ensuring electromagnetic compatibility and performance of advanced aeronautic systems. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer- Level 2 you will be responsible for leading requirements development, integration, and verification testing of electromagnetic systems across flight‑test platforms. Your responsibilities will include: Develop, track, and verify system requirements tied to electromagnetic compatibility (EMC) and E3 performance. Plan and execute platform‑level EMC testing, including test procedure design and flight‑test modification oversight. Perform RF and antenna analysis, COSITE assessments, and radome performance evaluations. Coordinate electromagnetic radiation hazard (EMRADHAZ) mitigation and support wiring, cabling, and...

Description: You will be the Electro-Optical Engineer Staff for the Electro Optical Infrared Team, which is responsible for developing and maturing EOIR solutions for the Lockheed Martin Aeronautics Fort Worth (LM Aero). What You Will Be Doing As the Electro-Optical Engineer Staff, you will support activities associated with the development and maturation of EOIR solutions, including defining, reviewing, and documenting engineering requirements, performing engineering document reviews, and coordinating with Principal Engineers and other key stakeholders. ”Your responsibilities will include: Defining, reviewing, and documenting engineering requirements for EOIR systems. Performing engineering document reviews and reviewing specifications to ensure compliance with contract requirements. Coordinating with Principal Engineers, other key stakeholders, and internal and external customers to support the development and integration of EOIR systems. Employing...

Description: You will be the Systems Engineer for the Vehicle Systems Engineering – Production Liaison Team which is responsible for bridging Vehicle Systems Engineering and Production on the F‑35 program. What You Will Be Doing As the Systems Engineer you will be responsible for ensuring seamless technical communication and problem‑resolution between design and production. Your responsibilities will include: Collaborate with senior engineers to troubleshoot and resolve technical issues on production aircraft. Lead Root Cause Corrective Action (RCCA) investigations for production and fleet anomalies. Coordinate and lead test events on production aircraft to support development and certification activities. Update and maintain 3D CAD models and 2D drawings, adhering to drafting standards and configuration‑management protocols. Develop and manage MBSE models and requirements using SysML and IBM DOORS to ensure traceability and system integrity....

Description: You will be the CAD/CAM Engineer Staff for the CAD/CAM & PLM organization which is responsible for advancing training and best‑practice processes across all aeronautical sites. What You Will Be Doing As the CAD/CAM Engineer Staff you will be responsible for leading the CAD and PLM training program, developing standards, and ensuring the engineering community can efficiently use the tools and processes required for mission success. Your responsibilities will include: Design, develop, and deliver training programs for CATIA V5, 3DX, NX, and Xcelerator across design, analysis, manufacturing, tooling, sustainment, and specialty engineering teams. Create and maintain training documentation, standards, and processes for CAD/CAM and PLM tools. Collaborate with Aero IT and the Design Process Integration team to define engineering dataset standards and update the Engineering Process Control Manual. Troubleshoot and resolve technical issues...

Description: You will be the Systems Integration & Test Engineer Sr for the Architecture, Design, Integration & Test (ADIT) – F-35 Sensor Systems Integration & Test (SI&T) team which is responsible for mission system capability integration & maturation, verification testing and regression testing for all F-35 modernization efforts. What You Will Be Doing As the Systems Integration & Test Engineer Sr you will be responsible for technical test planning and execution of the F‑35 Sensor Suite, including Radar, Electronic Warfare (EW), Countermeasures (CM), Electro‑Optical (EO)sensors and Fusion. You will ensure the SI&T process follows prescribed engineering standards and continuously improves those processes. Your responsibilities will include: Generate test plans and detailed test procedure documentation. Coordinate test objectives and execute testing across agile development teams. Conduct system‑level testing in...