203 engineering technician jobs found

Description SAIC is seeking to hire an Engineering Technician to support our Land System Integration Modern Vehicle Fielding (LSI MVF) in Camp Pendleton, CA and Camp Lejeune, NC . The (LSI MVF) program provides the design, engineering and full scale integration of C4ISR capabilities into tactical military vehicle platforms. It improves efficiency and effectiveness of integrating mission equipment on vehicle platforms for specific mission activities and provides post-fielding sustainment support . JOB RESPONSIBILITIES: Read and follow integration documentation, written or verbal instructions, schematics, rough sketches, drawings and diagrams, layouts, and plans often requiring interpretation Qualifications REQUIRED EDUCATION AND EXPERIENCE: High School diploma/GED Five (5) years of practical experience, to include: electronics repair, maintenance and checkout Must have a valid Driver's License REQUIRED CLEARANCE: US Citizen with the ability to...

Description SAIC is seeking to hire an Engineering Technician to support our Land System Integration Modern Vehicle Fielding (LSI MVF) in Camp Pendleton, CA and Camp Lejeune, NC . The (LSI MVF) program provides the design, engineering and full scale integration of C4ISR capabilities into tactical military vehicle platforms. It improves efficiency and effectiveness of integrating mission equipment on vehicle platforms for specific mission activities and provides post-fielding sustainment support . JOB RESPONSIBILITIES: Read and follow integration documentation, written or verbal instructions, schematics, rough sketches, drawings and diagrams, layouts, and plans often requiring interpretation Qualifications REQUIRED EDUCATION AND EXPERIENCE: High School diploma/GED Five (5) years of practical experience, to include: electronics repair, maintenance and checkout Must have a valid Driver's License REQUIRED CLEARANCE: US Citizen with the ability to...

Description SAIC is seeking an Engineering Technician to support NAVAIR PMA-209 Tactical Communications (TACCOM) / ARC-210 Radio with legacy and state-of-the-art Mobile User Objective System (MUOS) Satellite Communications engineering activities. Supports systems engineers with acquisition/procurement package development. Tasking includes conducting systems test plans and developing system test reports. The candidate will provide integration support for the ARC-210 radios on airborne platforms. Work will be performed client-site at NAS Patuxent River and in the SAIC office in California, MD. Job Duties: -Provide systems engineering and integration support to both the Secure Communications integration and the TACCOM development teams. -Represent the PMA209 TACCOM team at various meetings/events where the candidate must have excellent communication & organizational skills in addition to an ability work well with others in a demanding environment. -Support the secure...

Description SAIC is seeking an Engineering Technician in Middletown, RI. Job Duties: Assist in assembling, wiring, installing, and modifying electronic components, cables and harnesses, printed circuit boards (PCBs), or test fixtures. Run routine tests and check circuit continuity, voltage, or current using standard tools like multimeters and oscilloscopes. Replace defective parts, repair basic assemblies, and maintain equipment under close supervision. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Record test results, log configuration data, and report discrepancies in blueprints or schematics to engineer. Qualifications Qualifications: High school diploma or equivalent; some technical/vocational training preferred. Must have the ability to obtain an Interim SECRET clearance. Ability to read basic schematics and wiring diagrams; fundamental...

Description SAIC is seeking an Engineering Technician in Middletown, RI . In this role, you fabricate, update, qualify, and troubleshoot electronic, electro-mechanical systems including constructing cable and harnesses. To perform these tasks, you will work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform duties. You will work with engineers and customers to resolve technical issues that arise and to qualify systems. You will be responsible for marking up and documenting changes as well as clarifying methods and processes to perform tasks to supply engineer documentation. Applicants should have experience of performing required tasks in similar product environment. Job Duties: Fabricate electronic / electro-mechanical test equipment. Fabricate wire cables and harnesses Inspect, test, and perform qualification processes for systems and sub-assemblies. Troubleshoot technical issues to functionality and compliance....

Description SAIC is seeking an Engineering Tech IV in Bedford Indiana to support the Common Aviation Command and Control System (CAC2S) program. JOB DESCRIPTION: As the Command-and-Control System Engineering Technician, you will be a critical member of our CAC2S team responsible for the installation, maintenance, and optimization of hardware systems essential for CAC2S operations. In this position, you will collaborate with a dedicated team of professionals to address complex and impactful challenges. You will work alongside government customers and contractor teams to address a variety of tasks and projects while fostering strong relationships with customers, sponsors, and industry partners. The role of Engineering Technician IV will involve maintaining and upgrading this system. Tasking will involve: Supporting engineering activities such as design, test, and modifications; working from schematics, diagrams, written and verbal descriptions, layouts or defined...

Description SAIC is seeking an Engineering Technician in Hanahan, SC . Duties and Responsibilities: Maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. Determines equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. Performs simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common...

Description SAIC is seeking a detail-oriented and skilled Engineering Technician I to join our team as a Cable Assembly Technician supporting the US Navy in Bedford, IN. JOB RESPONSIBILITES: The ideal candidate will be responsible for assembling, testing, and troubleshooting various types of cable assemblies used in different applications for military applications. This entry-level position offers a great opportunity to develop hands-on experience and grow within our engineering and manufacturing team. Qualifications REQUIRED EDUCATION AND EXPERIENCE: High School Diploma/GED and zero years of experience. No clearance required to start however must have the ability to obtain a secret clearance. SAIC will sponsor the clearance process. Ability to perform repetitive tasks with precision. Capability to lift and handle materials weighing up to 25 pounds. Standing, sitting and twisting for periods at a time. Proficiency with hand tools. PREFERRED EXPERIENCE:...

Description SAIC is seeking an Engineering Technician in Middletown, RI . Job Duties : Supports engineering activities such as design, test, checkout, modification, fabrication and assembly of prototype electro mechanical systems. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Prepares engineering documentation, reports, drawings (sketches/flow charts/diagrams/schematics, etc.). Qualifications Qualifications : Trade School training or High School Diploma and (2) years related experience with relevant certification. Must have the ability to obtain SECRET clearance. Production cable building experience. Experience...

Description SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are strictly in accordance with...

Description SAIC is seeking an Engineering Technician V to support the US Navy in Oak Habor, WA. The Engineering Technician performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Completed work is reviewed for technical adequacy and satisfaction of requirements. This incumbent may train and be assisted by lower-level technicians, and perform one or a combination of the following: Fabricate, install, test, troubleshoot, modify, and repair various wire harnesses on ground and airframe applications. Conduct various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and recording test data....

Description SAIC is looking for an Engineering Technician III in Crane, IN to support the U.S. Navy. Job duties include: Provide test and evaluation, troubleshooting, lot acceptance, qualification, engineering analysis, documentation, procedure/process creation, shipment/receipt and vendor coordination of batteries. Provide test and evaluation of various battery chemistries, including Li-ion, Lithium Iron Disulfide, Lithium Calcium and Lead Acid. Support battery testing that will consist of testing temperature/humidity cycling, pressure/altitude, acceleration, vibration, and mechanical shock. Qualifications REQUIRED QUALIFICATIONS: Associate's Degree in Electrical Technology or related field. Additional years of experience accepted in lieu of degree Must be able to obtain a Secret Clearance. Interim Secret needed to start. Must be a U.S. citizen Experience with Microsoft Excel and Word Ability to read electrical drawings Must have excellent...

Description SAIC is seeking an Engineering Technician V to support the Infrared and Radio Frequency (IR/RF) Surface Offboard Countermeasures Engineering Branch located at NSWC Crane in Crane, Indiana. This technician will provide high level support for MK-53, MK-59 and LEED. Job Description: Support engineering activities such as design, test, modification, fabrication and assembly of prototype electronic and mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. . Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Prepares engineering documentation, reports, drawings (sketches/flow...

Description SAIC is seeking an experienced Engineering Technician to join our growing team at the Bedford Production Facility. Candidates must demonstrate expertise in system integration and assembly work and be comfortable working individually or as part of a team. Primary Responsibilities: Complete all assigned tasks as required for the project completion, including though not limited to mechanical system assembly, metal fabrication, electrical system installation, painting, etc... Maintaining readiness of equipment and tools to complete all given tasking. As part of the team, participate in efforts to improve processes and procedures for tasks that meet production and integration objectives. Conduct inspections, tests, evaluations, and document results for equipment and processes, proactively identifying and resolving issues to minimize rework. Duties may include additional logistics work as needed to ensure all items are staged and ready for operational...

Description Position: Junior Engineering Technician SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are...

Description Position: Junior Engineering Technician SAIC is currently seeking an Engineering Technician to join our teams in Norfolk, VA and San Diego, CA. All positions require onsite support (no remote) and an active Secret clearance to begin work. Candidate shall provide fleet technical services and troubleshooting of Aviation Launch and Recovery Equipment (ALRE) systems at shore sites and aboard ships: Troubleshooting of ALRE Systems and Subsystems Review and interpret applicable maintenance technical publications Evaluate current equipment conditions Identify, isolate, and correct part deficiencies to restore systems to optimal operational capability Technical Expertise and System Support Assist with the installation, repair, calibration, and testing of ALRE equipment Provide on the job training to Ships Force Certification and Inspection Readiness Assist with the certification and inspection of ALRE equipment Ensure all equipment and processes are...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 5 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they’re often classified. That’s what you’ll find at General Dynamics Mission Systems. Here you’ll lead amazing engineers as they invent the technologies, products and services that help our service members, intelligence analysts and first responders keep...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position LCS General Mission Module Maintenance Technician at   Port Hueneme, CA Naval Base   This position provides an opportunity to further advance the cutting-edge technology that supports some of our nation’s core defense/intelligence services and systems.  General Dynamics Mission Systems employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 1 year of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Help make the technologies, products and services that make a difference. That’s the opportunity that’s waiting for you at General Dynamics Mission Systems. We help our nation’s heroes keep our nation safe by creating solutions so advanced, they redefine innovation for the world. It’s an amazing challenge. And it’s waiting for you now. We apply advanced technologies such as Artificial Intelligence, Blockchain,...

Basic Qualifications Bachelor’s degree in a related specialized area or equivalent experience is required plus a minimum of 2 years of relevant experience; or Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what’s possible. Here you’ll work with the best and your talent will be front and center on projects that impact the world. Are you up to the...