69 weapons maintenance technician jobs found

Description SAIC is looking for a Weapons Maintenance Technician to support the AC-130 gunship located at Cannon Air Force Base in New Mexico . NOTE: Position is located full time at Cannon AFB. JOB RESPONSIBLITES: Interfaces with the customer to handle service inquiries and problems to include performing customer support activities involving the installation, modification, and repair of complex equipment and systems. Conducts on-site installation and testing of equipment to ensure proper working order. Isolates equipment start-up malfunctions and takes corrective action. May make technical presentations and has a strong knowledge of products. Trains customer personnel in equipment operation and maintenance responsibilities. Provides technical support for the 30mm and 105mm weapons systems in the areas of field service, troubleshooting, maintenance, and training support to the Air Force squadron at Cannon AFB. Provides on-site technical support for...

Description SAIC is looking for a Weapons Maintenance Technician to support the AC-130 gunship located at Cannon Air Force Base in New Mexico . NOTE: Position is located full time at Cannon AFB. JOB RESPONSIBLITES: Interfaces with the customer to handle service inquiries and problems to include performing customer support activities involving the installation, modification, and repair of complex equipment and systems. Conducts on-site installation and testing of equipment to ensure proper working order. Isolates equipment start-up malfunctions and takes corrective action. May make technical presentations and has a strong knowledge of products. Trains customer personnel in equipment operation and maintenance responsibilities. Provides technical support for the 30mm and 105mm weapons systems in the areas of field service, troubleshooting, maintenance, and training support to the Air Force squadron at Cannon AFB. Provides on-site technical support for...

Description SAIC is looking for a Weapons Maintenance Technician to support the AC-130 gunship located at Cannon Air Force Base in New Mexico . NOTE: Position is located full time at Cannon AFB. JOB RESPONSIBLITES: Interfaces with the customer to handle service inquiries and problems to include performing customer support activities involving the installation, modification, and repair of complex equipment and systems. Conducts on-site installation and testing of equipment to ensure proper working order. Isolates equipment start-up malfunctions and takes corrective action. May make technical presentations and has a strong knowledge of products. Trains customer personnel in equipment operation and maintenance responsibilities. Provides technical support for the 30mm and 105mm weapons systems in the areas of field service, troubleshooting, maintenance, and training support to the Air Force squadron at Cannon AFB. Provides on-site technical support for...

Description SAIC is looking for a Weapons Maintenance Technician to support the AC-130 gunship located at Cannon Air Force Base in New Mexico . NOTE: Position is located full time at Cannon AFB. JOB RESPONSIBLITES: Interfaces with the customer to handle service inquiries and problems to include performing customer support activities involving the installation, modification, and repair of complex equipment and systems. Conducts on-site installation and testing of equipment to ensure proper working order. Isolates equipment start-up malfunctions and takes corrective action. May make technical presentations and has a strong knowledge of products. Trains customer personnel in equipment operation and maintenance responsibilities. Provides technical support for the 30mm and 105mm weapons systems in the areas of field service, troubleshooting, maintenance, and training support to the Air Force squadron at Cannon AFB. Provides on-site technical support for...

Description JOB DESCRIPTION: The Army Navy Business Group currently has a career opportunity for a Joint Terminal Attack Controller Instructor (JTAC-I) training analyst to provide JTAC classroom and range training, operation of a JTAC simulator, and student evaluation support to Naval Aviation Warfighting Development Center (NAWDC) in Fallon, NV. The ideal candidate will have combat experience, strong interpersonal skills to work with Naval Special Warfare (NSW) students and staff, and expertise in assessing and updating JTAC curricula. Proficiency with Modeling and Simulation (M&S) systems and the ability to address complex combat challenges in the field, assess dynamic situations, and guide students effectively is essential. Extensive experience in combat planning, execution, and junior personnel training is also required. In addition, he/she will have excellent public speaking, presentation, and time management skills, as well as at least eight years of...

Standard Job Description You will be the Aircraft Mechanic, for the Aircraft Maintenance Team which is responsible for comprehensive care of the F‑35 fleet, from launch and recovery to full‑spectrum maintenance. This position is located at our Fallon, Nevada site. What You Will Be Doing As the Aircraft Mechanic, F‑35 - Level 3 you will be responsible for delivering high‑quality, nose‑to‑tail maintenance on F‑35 aircraft while supporting mission readiness. Your responsibilities will include: - Perform comprehensive F‑35 maintenance, inspections, and servicing across all aircraft systems in accordance with directives. - Execute field‑level modifications and Time Compliance Technical Data (TCTD) actions. - Provide on‑the‑job training to interim contract support, military maintainers, and international organic maintainers. - Maintain accurate aircraft records in ALIS/CMMS and keep production staff updated on aircraft status. - Adhere to safety procedures, practice good...

Description: You will be the Field & Service Mechanic - 2nd or 3rd Shift for the aircraft maintenance team supporting the JSF program at the Patuxent River flight test site. This position will require employee to work in a team environment maintaining F-35 aircraft. Tasks will include items such as aircraft Inspection, servicing, repair, overhaul, modification, fabrication and weapon loading as required. What You Will Be Doing Embark on a career that sets you amongst the elite group of technicians supporting the F-35 program at Patuxent River. This role goes beyond the traditional scope of aircraft maintenance; it immerses you in a world where you will maintain, modify, inspect, and troubleshoot the cutting-edge F-35 aircraft, both scheduled and unscheduled. You're not just working on any aircraft; you're ensuring the peak performance of a machine at the forefront of aviation technology. As a Field & Service Mechanic with our team, you may also: • Engage in all facets...

Description: You will be the Field & Service Mechanic - 2nd Shift for the aircraft maintenance team supporting the JSF program at the Patuxent River flight test site. This position will require the employee to work in a team environment maintaining F-35 aircraft. Tasks will include items such as aircraft Inspection, servicing, repair, overhaul, modification, fabrication and weapon loading as required. What You Will Be Doing Embark on a career that sets you amongst the elite group of technicians supporting the F-35 program at Patuxent River. This role goes beyond the traditional scope of aircraft maintenance; it immerses you in a world where you will maintain, modify, inspect, and troubleshoot the cutting-edge F-35 aircraft, both scheduled and unscheduled. You're not just working on any aircraft; you're ensuring the peak performance of a machine at the forefront of aviation technology. As a Field & Service Mechanic with our team, you may also: • Engage in all facets of...

Description: You will be the F-35 Aircraft Mechanic for a team which is responsible for maintaining the operational readiness of F‑35 aircraft at Luke AFB, AZ. What You Will Be Doing: As the F-35 Aircraft Mechanic you will be responsible for delivering safe, flight‑ready aircraft through comprehensive maintenance, inspections, and training. Your responsibilities will include: - Perform launch and recovery activities and nose‑to‑tail maintenance on F‑35 aircraft. - Execute field‑level modifications and Time Compliance Technical Data (TCTD) maintenance actions. - Provide on‑the‑job training to interim contract support, USAF maintainers, and international organic maintainers. - Maintain and update aircraft records, ensuring strict compliance with directives and informing production staff of status. - Obtain and retain a flight‑line driver competency card and work first, second, or third shift—and short‑notice TDY—as required. What’s In It For You: We are committed to...

Description: WHAT WE’RE DOING At Lockheed Martin, we engineer innovative solutions to deliver resilient systems, products, and services across evolving cyber threats. As risks to our hardware, software, and supply chains continue to rise, our customers require advanced solutions to mitigate growing vulnerabilities and ensure our systems can operate in cyber contested environments. Strong resiliency-focused engineering is essential to protecting Rotary and Mission Systems (RMS) platform/weapon systems from increasingly sophisticated cyber threats. THE WORK ***PLEASE NOTE THIS POSITION REQUIRES THE CANDIDATE TO EXPATRIATE TO THE UNITED KINGDOM FOR 3 OR MORE YEARS*** Lockheed Martin Rotary and Mission Systems is seeking a Sr. Systems Engineer in Barrow-in-Furness, Cumbria, England. In this role you will permanently reside in United Kingdom as an Expatriate supporting COLUMBIA/Dreadnought SSBN construction for Strategic Systems Programs (SSP) Strategic Weapons Systems (SWS) SP24...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position LCS General Mission Module Maintenance Technician at   Port Hueneme, CA Naval Base   This position provides an opportunity to further advance the cutting-edge technology that supports some of our nation’s core defense/intelligence services and systems.  General Dynamics Mission Systems employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national...

Description SAIC is currently seeking a Field Service Engineer (FSE) to support the Medusa Sustainment project. The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a Government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. This role involves implementing and optimizing hardware and/or software products and multi-vendor systems at customer sites. The position includes oversight and integration support for existing systems, installation of upgrades, problem diagnosis, and resolution, as well as providing customer feedback and support. The ideal...

Description SAIC is currently seeking a Field Service Engineer (FSE) to support the Medusa Sustainment project. The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a Government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. This role involves implementing and optimizing hardware and/or software products and multi-vendor systems at customer sites. The position includes oversight and integration support for existing systems, installation of upgrades, problem diagnosis, and resolution, as well as providing customer feedback and support. The ideal...

Description SAIC is currently seeking a Field Service Engineer (FSE) to support the Medusa Sustainment project. The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a Government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. This role involves implementing and optimizing hardware and/or software products and multi-vendor systems at customer sites. The position includes oversight and integration support for existing systems, installation of upgrades, problem diagnosis, and resolution, as well as providing customer feedback and support. The ideal...

Description SAIC is currently seeking a Field Service Engineer (FSE) to support the Medusa Sustainment project. The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a Government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. This role involves implementing and optimizing hardware and/or software products and multi-vendor systems at customer sites. The position includes oversight and integration support for existing systems, installation of upgrades, problem diagnosis, and resolution, as well as providing customer feedback and support. The ideal...

Standard Job Description Performs installation, maintenance, and repairs on line manufacturing equipment. Locates and diagnoses failures, replaces defective components, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. May redesign basic optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. Maintains appropriate maintenance, inventory, and repair logs. Uses a variety of hand, power, and test tools and equipment.   You will be an Electronics Electro-Mechanical Maintenance Technician for our production factory team in Chelmsford, MA, a center of excellence for designing, prototyping, manufacturing, and testing cutting-edge RF and microwave microelectronic modules. Our team is responsible for ensuring the...

Standard Job Description Performs installation, maintenance, and repairs on line manufacturing equipment. Locates and diagnoses failures, replaces defective components, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. May redesign basic optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. Maintains appropriate maintenance, inventory, and repair logs. Uses a variety of hand, power, and test tools and equipment.   You will be an Electronics Electro-Mechanical Maintenance Technician for our production factory team in Chelmsford, MA, a center of excellence for designing, prototyping, manufacturing, and testing cutting-edge RF and microwave microelectronic modules. Our team is responsible for ensuring...

Standard Job Description Performs installation, maintenance, and repairs on line manufacturing equipment. Locates and diagnoses failures, replaces defective components, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. May redesign basic optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. Maintains appropriate maintenance, inventory, and repair logs. Uses a variety of hand, power, and test tools and equipment.   You will be an Electronics Electro-Mechanical Maintenance Technician Senior Specialist for our production factory team in Chelmsford, MA, a center of excellence for designing, prototyping, manufacturing, and testing cutting-edge RF and microwave microelectronic modules. Our team is responsible...

Standard Job Description WHAT WE’RE DOING At Lockheed Martin's Rotary and Mission System's Cyber Resiliency organization, we are dedicated to engineering and deploying cutting-edge cyber defense solutions across our corporation. Our focus on cybersecurity is paramount to ensuring mission success for our customers, even in the face of evolving cyber threats. THE WORK As a member of our team, you will be involved in a variety of activities aimed at enhancing the cyber resiliency of the AFSOC ACS program. This includes tasks such as: • Hardening operating systems, applications, and network devices • Conducting vulnerability scans • Continuous monitoring of the security posture of the system • Assisting with Government Certification Test and Evaluation (CT&E) and Vulnerability Testing • Implementing security updates and patches • Applying configuration changes to ESS and ACAS security tools • Providing support to maintain the Certification and Accreditation (C&A)...

Description SAIC is seeking an experienced and highly motivated Senior Systems Engineer to lead Integration, Validation, and Verification (IV&V) activities for an Automated Test Set program supporting undersea defense systems in Middletown, RI . This is a technical leadership position responsible for owning the integration and V&V strategy and execution across the subsystems comprising a complex test set, working in close partnership with the Program's Lead Systems Engineer and a cross-functional team of engineers, technicians, and government stakeholders. More on the Role As the Automated Test Set IV&V Lead, you will report directly to the Program's Lead Systems Engineer and serve as the technical authority for all integration, verification, and validation activities on the program. You will be responsible for ensuring that the subsystems comprising the test set - which may include domains such as power, fluidics, controls and data management, communications,...