40 senior hardware engineer jobs found

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work In this role, you will contribute to design and test of digital hardware including servers, cabinets, high speed digital printed circle boards, and other assemblies for radar and other applications. The successful candidate will have experience and/or knowledge of the design and test of digital hardware. preferably including Printed Circuit Board and cable design. Must be a US Citizen.; This position will require a government security clearance.; This position is located at a facility that requires special access. Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer...

Standard Job Description You will be the Electrical Engineer Senior for the Hardware Engineering team at Lockheed Martin  Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer Senior, you will support the design, development, integration, test, and production of electrical hardware and subsystems for defense programs. Your responsibilities may include: • Serving as the primary technical contact for assigned subsystems or hardware deliverables across development and production phases • Providing technical leadership and guidance to subsystem suppliers, ensuring contract requirements flow accurately and hardware meets specifications • Owning the disposition of hardware through Material Review Board...

Standard Job Description As the electronics engineer you will be responsible for testing a variety of electronic equipment, system interconnect and cabling designs in support of the Test Support Products  You will participate in requirements analysis, configuration determination, design, materiel procurement, manufacturing, test and acceptance of cabling & interconnects for a wide variety of electrical and electromechanical test systems and multi-function integrated test equipment in support of the US Navy's Ballistic Missile Flight Test Program.     As the electronics engineer you will mentor junior engineers, interface extensively with our customer, as well as, senior leadership. You will also create/update project/process documentation that align to project requirements.    Specific responsibilities include but are not limited to:  Lead the design, procurement, assembly, test, and verification of missile test systems, including data  review and trending  Develop...

Standard Job Description Join Our Team as an Electrical Engineer and become a member of the US Navy's Fleet Ballistic Missile (FBM) D5 Life Extension 2 (D5LE2) Electrical Ground Support Equipment (EGSE team. This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partner can thrive in an exciting fast-paced dynamic environment?   Location: This position does not support teleworking; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 *Please note we will not provide relocation services for this position.   What does this role look like? The FBM Program is experiencing significant growth, and we need your expertise to deliver amazing new technologies to our customers while maintaining the technical requirements of the strategic deterrence. The Electronics Engineer II is an...

Standard Job Description Join Our Team as an Electrical Enginee r and become a member of the US Navy's Fleet Ballistic Missile (FBM) D5 Life Extension 2 (D5LE2) Electrical Ground Support Equipment (EGSE team. This is an exciting opportunity to work on the FBM Program, a 63-year-old Program with a long-standing history of Mission Success and of a strong partner can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 *Please note we will not provide relocation services for this position.   What does this role look like?  The FBM Program is experiencing significant growth, and we need your expertise to deliver amazing new technologies to our customers while maintaining the technical requirements of the strategic deterrence. The Electronics Engineer II is an individual contributor on the LE2 –...

Standard Job Description Join Our Team as an Electrical Engineer and become a member of the US Navy's Fleet Ballistic Missile (FBM) D5 Life Extension 2 (D5LE2) Electrical Ground Support Equipment (EGSE team. This is an exciting opportunity to work on the FBM Program, a 63-year-old Program with a long-standing history of Mission Success and of a strong partner can thrive in an exciting fast-paced dynamic environment?   Location: This position does not support teleworking; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 *Please note we will not provide relocation services for this position.   What does this role look like?  The FBM Program is experiencing significant growth, and we need your expertise to deliver amazing new technologies to our customers while maintaining the technical requirements of the strategic deterrence. The Electronics Engineer II is an individual contributor on the...

Standard Job Description The Work As the Senior Test Software Automation Engineer, you will design and develop automated test station Software used to test RF/Digital/Analog/Power modules, subsystems, and systems. Designs can include automated test programs, as well as sim/stim test systems used in production test solutions. Responsibilities also include: - The design, development and maintenance phases of the project. - Presenting design documentation for customer and team reviews.  - Integration and validation of the test software. - Costing/proposal data generation for new business. Who you are The ideal candidate for this position will have: - Experience developing test automation software in an aerospace environment using LabView, C/C++ and Matlab. - Expertise in automating measurement equipment. -Previous experience with computer operating systems and administration.  What We're Doing Lockheed Martin is shaping the future of defense through cutting edge...

Standard Job Description As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO and Catia layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence, including occasional travel for site visits and field demonstrations • Managing drawing releases, responding to CRs, generating CN's, and presenting/supporting change boards and...

Standard Job Description The HWIL Software Integration Engineer (E4) provides senior level technical leadership for the development, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) simulations that combine missile hardware components with high performance software models. With 5 + years of relevant experience, the incumbent operates with technical authority, defines integration strategy, and influences program decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities: • Software Architecture & Strategy - Define and evolve the software architecture for HWIL test beds, establishing standards for real time code, low latency data pathways, and deterministic execution. • Lead the development and integration of missile flight software, guidance algorithms, and sensor models into closed loop simulation environments (including 6 DOF missile dynamics). • Real Time Integration &...

Standard Job Description This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Englewood or Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate in requirements analysis, configuration...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development. Determines architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.   What We're Doing At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within our capacity – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, education, and background! The Work As an FPGA Engineer you will;  • Perform complex FPGA firmware architecture and/or custom digital board designs. • Design digital signal processing,...

Standard Job Description Position details: Location: Littleton, CO Work Schedule: 9x80 Position type: Full-time onsite (this is not a hybrid position) Lockheed Martin Space is seeking a Senior Electrical Engineer to join our team in Littleton, CO! By joining the Lockheed Martin Space Radio Frequency (RF) Talent Center (RFTC) team, you will contribute our mission supporting challenging programs related to Space Vehicles, Hypersonics, Human Space Flight and Interplanetary Missions, Missile Defense, and more. As a Certified Principle Engineer (CPE), this role will have ownership for the success of a Digital Signal Payload. Responsibilities will include, but are not limited to; support vendor development, internal design evaluation, testing, analysis, integration, and initialization of the payload. Review and ensure compliance with vendor and program requirements, support payload troubleshooting, and lead cross functional engineering teams throughout the product...

Standard Job Description WHAT WE'RE DOING Lockheed   Martin   Rotary   and   Mission   Systems (RMS) is a global leader in advanced radar, sensor, and mission‑critical systems.   We drive innovation and uphold the highest standards of business ethics to deliver cutting‑edge solutions for our customers.   The Radar portfolio spans a range of air‑, land‑, and sea‑based platforms, supporting both ongoing programs and new proposals. THE WORK Provide technical and programmatic leadership for the Radar design team, guiding architecture, trade‑studies, and hardware solutions. Oversee technical analysis, ensure rigorous engineering processes, and maintain product quality across the Radar portfolio. Drive common‑hardware strategies to reduce cost, risk, and schedule impacts. Serve as the primary liaison to internal and external customers, resolving technical issues and supporting program planning. Lead cross‑functional teams, fostering clear verbal and written communication...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. *Please note we will not provide relocation services for this position. What does this role look like? As a Hardware Engineer, you will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate...

Description: What We're Doing At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within our capacity – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, education, and background! The Work As an FPGA Engineer you will; • Perform complex FPGA firmware architecture and/or custom digital board designs. • Design digital signal processing, messaging, control, and high-speed communications. • Interface and collaborate with program leadership and teammates on a regular basis. • Estimate, break down and plan work for their firmware team. • Take a high DSP algorithm for a radar system and break it into small pieces and coach junior engineers. Who We Are Our team comprises a diverse group of highly motivated and dedicated technical professionals. We foster a collaborative environment that values teamwork and creativity....

Description: This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Englewood or Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate in requirements analysis, configuration determination, design,...

Description: WHO WE ARE At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, and education. Come and experience your future! WHAT WE'RE DOING An engineer working in the System Safety Engineering group will contribute to a wide variety of projects based on our business needs. The engineer will work as an independent contributor with team leadership to perform Systems Safety Engineering tasks in support of project objectives. THE WORK The engineer will join a group of experienced safety and specialty engineers working on various missile launching system programs. You will contribute to analysis and design support efforts for all aspects of the system safety programs on these products, ensuring that safety is crafted into the...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...