14 program management jobs found in Titusville, FL

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...

Description: You will be the Hardware IPT Lead for the TacIRST CLASS system within the ATWS NBAE program. Our team delivers the high performance infrared search and track hardware that powers Lockheed Martin’s missile and fire control portfolio. You’ll lead a cross functional group of precision mechanical designers, electrical engineers, structural and thermal analysts, electromechanical designers, and components and materials specialists to bring the system from concept to production ready hardware. What You Will Be Doing As the IPT Lead you will own the end to end hardware design effort, tracking progress across all disciplines, aligning processor builds with the program schedule, and guiding the transition to a production engineering team that optimizes high rate manufacturing. You will collaborate closely with other engineering domains and program stakeholders to ensure the hardware meets performance, reliability, and cost targets. Your responsibilities will include: •...

Description: You will be the Senior ASIC & FPGA Design Engineer for the ADSWAP CN program. Our team builds the next generation missile and fire control systems that power aerospace and defense grade platforms. We turn ambitious system concepts into hardened hardware, partnering with software, hardware, and systems engineers to deliver integrated, high performance solutions. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end creation of sophisticated FPGA architectures—from initial concept through detailed implementation and verification. You will define specifications, run trade off studies, and ensure every design meets rigorous power, thermal, and utilization targets while staying aligned with Design Assurance standards. Your responsibilities will include: • Develop complete FPGA design specifications and high level architecture in collaboration with cross functional teams. • Select the optimal FPGA family (Xilinx, Intel,...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: What We're Doing At Lockheed Martin Rotary Mission Systems, we are at the forefront of innovation, working on exciting programs and developing cutting-edge products and applications to address the complex and evolving needs of our customers. Our team is dedicated to pushing the boundaries of technology and engineering excellence. The Work Lockheed Martin RMS is seeking talented engineers looking to utilize their hardware, software, and test skills by joining our Test Program Set Engineering team. Our team provides technical support for a number of aircraft and weapons systems to maximize operational readiness. Customers are both foreign and domestic and include branches of the US military. As a key member of our Test Program Set (TPS) Engineering Team, responsibilities will include: • Design TPS Hardware (Interface Test Adapters, Cables, Text Fixtures etc.) to interface required for testing hardware on automatic test stations. • Interpret electrical...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...