13 reliability engineer jobs found

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...

Description: You will be the Circuit Card Design Engineer on the ADSWAP CN program. Our team delivers mission critical power electronics for advanced defense systems, driving schematic capture, EPCAD layout, and full cycle Design Assurance for high reliability circuit card assemblies. What You Will Be Doing As the Circuit Card Design Engineer you will own end to end design—from initial concept through layout, verification, and release—ensuring each design meets power distribution, EMI, grounding, isolation, and environmental requirements. You will work side by side with mechanical, software, and test engineers to accelerate procurement and test cycles while providing complete design data packages for Design Assurance reviews. Your responsibilities will include: • Capture schematics and produce EPCAD layouts using Siemens Xpedition Enterprise, applying best practice routing, signal integrity, and EMI mitigation techniques. • Develop power distribution circuit card assemblies...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...

Description: You will be the Hardware IPT Lead for the TacIRST CLASS system within the ATWS NBAE program. Our team delivers the high performance infrared search and track hardware that powers Lockheed Martin’s missile and fire control portfolio. You’ll lead a cross functional group of precision mechanical designers, electrical engineers, structural and thermal analysts, electromechanical designers, and components and materials specialists to bring the system from concept to production ready hardware. What You Will Be Doing As the IPT Lead you will own the end to end hardware design effort, tracking progress across all disciplines, aligning processor builds with the program schedule, and guiding the transition to a production engineering team that optimizes high rate manufacturing. You will collaborate closely with other engineering domains and program stakeholders to ensure the hardware meets performance, reliability, and cost targets. Your responsibilities will include: •...

Description: You will be the Hardware IPT Lead for the TacIRST CLASS system within the ATWS NBAE program. Our team delivers the high performance infrared search and track hardware that powers Lockheed Martin’s missile and fire control portfolio. You’ll lead a cross functional group of precision mechanical designers, electrical engineers, structural and thermal analysts, electromechanical designers, and components and materials specialists to bring the system from concept to production ready hardware. What You Will Be Doing As the IPT Lead you will own the end to end hardware design effort, tracking progress across all disciplines, aligning processor builds with the program schedule, and guiding the transition to a production engineering team that optimizes high rate manufacturing. You will collaborate closely with other engineering domains and program stakeholders to ensure the hardware meets performance, reliability, and cost targets. Your responsibilities will include: •...