19 system safety engineer jobs found

Description SAIC is seeking a System Safety Engineer to provide critical safety engineering analysis and support for the Submarine Launched Cruise Missile - Nuclear (SLCM-N) development program. This advanced role involves integrating safety principles across the entire Department of Defense (DoD) acquisition lifecycle while adhering to MIL-STD-882E guidelines. The selected candidate will contribute to the design, development, and deployment phases of this next-generation weapons system, focusing on subsystem or whole-system safety, as required. This role requires close collaboration with multidisciplinary teams consisting of engineers, program managers, and government stakeholders while also maintaining oversight of vendor activities. The candidate will work in a high-priority national defense environment, enabling safe and effective execution of a program critical to U.S. defense capabilities. Note: The position supports remote, onsite, or hybrid work at NSWC Crane...

Description SAIC is seeking a System Safety Engineer to provide critical safety engineering analysis and support for the Submarine Launched Cruise Missile - Nuclear (SLCM-N) development program. This advanced role involves integrating safety principles across the entire Department of Defense (DoD) acquisition lifecycle while adhering to MIL-STD-882E guidelines. The selected candidate will contribute to the design, development, and deployment phases of this next-generation weapons system, focusing on subsystem or whole-system safety, as required. This role requires close collaboration with multidisciplinary teams consisting of engineers, program managers, and government stakeholders while also maintaining oversight of vendor activities. The candidate will work in a high-priority national defense environment, enabling safe and effective execution of a program critical to U.S. defense capabilities. Note: The position supports remote, onsite, or hybrid work at NSWC Crane...

Description SAIC is seeking a Systems Safety Engineer at our office in Middletown, RI . A successful candidate will work as part of a team analyzing a system to identify hazards, categorize risk, and recommend mitigations to reduce the risk of mishap occurrence. Candidates will collaborate with internal team, government personnel, and subcontractors. Job Duties: Utilizing quantitative and qualitative risk assessment techniques to perform safety analysis in accordance with MIL-STD-882E and other guidance. Analysis of hardware, software, firmware, and system interfaces to identify hazards to personnel, equipment, and the environment, to include supplemental analysis techniques such as fault tree analyses, failure modes and hazardous effects analyses, and sneak circuit analyses. Review System Requirements documentation to identify potential hazardous conditions and make recommendations to system design in collaboration with program staff. Performing operational...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required . Responsibilities for this Position We are seeking an experienced  Senior Systems Engineer 3 to lead complex systems engineering efforts with a strong emphasis on personal and environmental safety . The ideal candidate will bring deep technical expertise, safety engineering knowledge, and a...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. Agile experience preferred.       CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at a reasonable amount of time.  Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required . Responsibilities for this Position Job Summary We are seeking a highly skilled Advanced Systems Engineer 3 to support and lead systems engineering efforts with a specialized focus on Nuclear Surety . The ideal candidate will possess extensive experience in nuclear weapons systems,...

Description SAIC is seeking a Mechanical Engineer - to join a multidisciplinary team supporting the design and development of advanced receiver (Rx) and transmitter (Tx) systems for aerospace and sea-based platforms. This role focuses on providing mechanical engineering expertise to ensure the successful integration of systems within diverse environments, ranging from flight systems to shipboard installations. The selected individual will design mechanical solutions for system integration, including mounting systems, antenna gimballing/vectoring mechanisms, and equipment enclosures. Additional responsibilities include developing installation plans, addressing environmental factors such as aerospace and shipboard conditions, and ensuring compliance with stringent operational specifications. The role also involves packaging designs for transportation and engineering considerations for material/weight handling and structural loading for shipboard systems. This position requires a...

Description SAIC is seeking a Senior Electrical Engineer to join our team of industry-leading innovators and technical experts. This role involves designing, analyzing, and managing complex electrical systems for a reconfigurable air defense project supporting defense, government, and commercial in Huntsville, AL . Key Responsibilities System Design and Implementation: Proficiency in designing and developing electrical components and systems. Experience in integrating software design with electrical components. Proficiency with design software such as SolidWorks, Altium Designer, or similar tools. Perform calculations, simulations, and analysis for circuit design, power distribution, grounding, and load flow. Collaboration and Integration: Collaborate with multidisciplinary engineering teams, program managers, and clients to develop integrated solutions that meet technical and programmatic requirements. Coordinate with mechanical, software, and...

Description SAIC is seeking an experienced Electrical Engineer to provide non-personal engineering, technical, and program support services to the Naval Surface Warfare Center, Crane Division (NSWC-CR). This position directly supports facility program operations, engineering development, and infrastructure modernization projects across mission-critical facilities. The candidate will collaborate with NSWC Crane technical codes, facility managers, and engineering customers to define requirements, develop designs, and support sustainment activities for electrical and facility utility systems. JOB RESPONSIBILITES: Provide engineering support for facility-related electrical systems including medium- and low-voltage distribution, industrial power systems, and building electrical infrastructure. Develop design criteria, performance specifications, equipment utility requirements, and installation documentation for process equipment and mission facility systems. Prepare Scopes of...

Standard Job Description You will be the Senior Pulsed Power Engineer for the Power & Plasma Team which is responsible for developing advanced pulsed power and plasma technologies for future air platforms. What You Will Be Doing As the Senior Pulsed Power Engineer you will be responsible for delivering hardware solutions that enable high‑performance plasma experiments. Your responsibilities will include: Design, prototype, and fabricate pulsed power electronics and associated control hardware. Develop and execute test procedures, troubleshoot hardware, and validate performance in a fast‑paced environment. Create and maintain data acquisition systems and control software for plasma physics experiments. Collaborate with cross‑functional engineers to integrate solutions into larger system architectures. Prepare technical reports, data analyses, and presentations for internal and external stakeholders. What’s In It For You We are committed to supporting your work‑life...

Description: WHAT WE'RE DOING Provide technical support for Radar and/or Sonar programs focusing on power‑supply design and power‑subsystem engineering. The role drives reliable, high‑performance power solutions that enable mission‑critical sensor systems. THE WORK Design, analyze, and simulate power‑supply circuits, distribution networks, and power‑conversion topologies to meet system requirements. Perform root‑cause investigations and develop corrective‑action plans for power‑related issues. Build and refine engineering procedures, seeking continuous‑improvement opportunities and greater efficiency. Mentor junior engineers, sharing expertise in power‑electronics best practices and troubleshooting techniques. Collaborate closely with senior engineers, subject‑matter experts, and cross‑program teams to integrate power solutions into radar/sonar platforms. WHO WE ARE Lockheed Martin is an equal‑opportunity employer that values, integrity, and innovation. Our culture is...

Description: WHAT WE'RE DOING Provide technical support for Radar and/or Sonar Programs focusing on power‑supply design and power‑subsystem engineering. The role drives reliable, high‑performance power solutions that enable mission‑critical sensor systems. THE WORK Design, analyze, and simulate power‑supply circuits, distribution networks, and power‑conversion topologies to meet system requirements. Perform root‑cause investigations and develop corrective‑action plans for power‑related issues. Build and refine engineering procedures, seeking continuous‑improvement opportunities and greater efficiency. Mentor junior engineers, sharing expertise in power‑electronics best practices and troubleshooting techniques. Collaborate closely with senior engineers, subject‑matter experts, and cross‑program teams to integrate power solutions into radar/sonar platforms. WHO WE ARE Lockheed Martin is an equal‑opportunity employer that values integrity, and innovation. Our culture is...

Description: You will be the Senior Pulsed Power Engineer for the Power & Plasma Team which is responsible for developing advanced pulsed power and plasma technologies for future air platforms. What You Will Be Doing As the Senior Pulsed Power Engineer you will be responsible for delivering hardware solutions that enable high‑performance plasma experiments. Your responsibilities will include: Design, prototype, and fabricate pulsed power electronics and associated control hardware. Develop and execute test procedures, troubleshoot hardware, and validate performance in a fast‑paced environment. Create and maintain data acquisition systems and control software for plasma physics experiments. Collaborate with cross‑functional engineers to integrate solutions into larger system architectures. Prepare technical reports, data analyses, and presentations for internal and external stakeholders. What’s In It For You We are committed to supporting your work‑life balance and overall...

Description: What We're Doing Lockheed Martin is shaping the future of defense through cutting edge radar and missile defense technologies, and we want you to help write the next chapter. As the premier developer of active electronically scanned array (AESA) radars and integrated air and missile defense solutions for the U.S. military, our allies, and more than 45 nations worldwide, we deliver world class situational awareness, early warning, and kill assessment capabilities in the most demanding environments. Join a global team of 35 000 engineers, software developers, and cyber experts who turn complex challenges into reliable, next generation systems that keep warfighters ahead of emerging threats. Your talent will power everything from space domain awareness to ground based radar testbeds, ensuring the safety of today’s forces and the security of tomorrow’s world. The Work Successful can will: The Level 4 Power Systems Engineer is a senior technical contributor...

Description: Join Our Team as a Electronics Engineer, Power Support where you will work on the development of ground power systems for Electrical Ground Support Equipment for the Orion spacecraft supporting NASA’s manned Artemis missions. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in: Kennedy Space Center FL where you will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready...

Basic Qualifications Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is preferred, but must be obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The responsibility is career-defining. So is the opportunity. At General Dynamics Mission Systems, we invent the technologies, products and services, that help our nation’s heroes keep our nation safe. The work is so advanced, our teams regularly...

Description SAIC is seeking a Field Engineer for advanced Airborne Electronic Warfare systems. This position is on-site in Crane, IN. Work will involve working on and around US Navy aircraft in both cold and hot environments. Work environment may be noisy, and employee may be exposed to the smell of aircraft exhaust fumes. Travel may be to CONUS and/or OCONUS locations. When not traveling, candidate will work on-station at NSWC Crane and will help with Fleet Support Team/Depot repair of assets, will write/validate procedures, work with draftsmen to generate drawings, perform Engineering Investigations, assist with Engineering Change Proposals, and respond to fleet requests for information. Qualifications Required Education and Experience: Bachelor's degree in Computer, Electronic, or Electrical Engineering from an ABET accredited university, plus at least four (4) years of experience working in the field Should be familiar with mechanical hand and power...

Description: The future of aerospace is built by engineers who can bridge the gap between mechanical design and advanced electronics. At Lockheed Martin Aeronautics, we’re looking for a Senior Mechanical Engineer to help design and integrate mission-critical electronic hardware for advanced aircraft systems. In this role, you’ll work on ruggedized avionics, embedded hardware, and electro-mechanical systems that support some of the most sophisticated aerospace technology in the world. If you enjoy solving complex hardware challenges, collaborating across engineering disciplines, and seeing your designs support real-world missions, this opportunity was built for you. What You Will Be Doing As the Mechanical Engineer - Level 3 you will be responsible for delivering robust mechanical solutions that enable the EHD team’s mission‑critical hardware to perform flawlessly in aerospace environments. Your responsibilities will include: Design and analyze mechanical...

Description: You will be the Thermal Analysis Mechanical Engineer for the Mechanical Analysis team within Lockheed Martin Missiles & Fire Control (MFC). Our team pioneers thermal and structural analysis solutions that enable precision engagement systems for the Army, Navy, Air Force, Marine Corps, NASA, allied forces, and civilian nuclear power customers. What You Will Be Doing As the Thermal Analysis Mechanical Engineer you will lead the creation and validation of thermal models for mechanical, structural, optical, and electronic assemblies. You’ll work side by side with designers, suppliers, and test engineers to guarantee that every component meets rigorous performance, reliability, and safety specifications. Your responsibilities will include: • Researching and developing viable thermal and structural solutions for complex systems and components. • Building, calibrating, and correlating analytical models to support product development decisions. • Planning and...

Description We are seeking motivated Mechanical Engineers to join our team supporting the Aircraft Launch and Recovery Equipment (ALRE), specifically the Electromagnetic Aircraft Launch System (EMALS) and Advanced Arresting Gear (AAG) programs. These systems play a critical role in naval aviation operations, providing advanced solutions for aircraft launches and recoveries aboard Ford-class aircraft carriers. This role offers opportunities for entry to mid-level engineers to work on the design, development, testing, troubleshooting, and ongoing support of high-performance mechanical systems for defense applications. Candidates will contribute to innovative projects that align with national security priorities, including system installations and emergency troubleshooting aboard active vessels or at test sites. Must be local to the Lakehurst, NJ area and onsite a minimum of 4 days a week. Must be a US citizen and able to qualify for a DoD Secret clearance. Travel of up...