13 science jobs found in Grand Prairie

Description: Missiles and Fire Control in Orlando, Florida an opening for an experience lead test engineer. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: •Designing,...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Indirect Fire Protection Capability Inc 2 (IFPC2) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface requirements • Supporting development of multiple circuit card assemblies • Managing...

Description: You will be an Environmental, Safety and Health (ESH) Engineer at Lockheed Martin Missiles & Fire Control in Grand Prairie, Texas, supporting a growing campus and workforce engaged in the research, design, test, production, assembly, and transportation of precision engagement aerospace and defense systems. What You Will Be Doing As an Environmental, Safety and Health (ESH) Engineer, you will support program activities comprised of 70% Safety & Health and 30% Environmental Support as needed. Your responsibilities will include, but are not limited to: Evaluate Safety & Health programs, assess their effectiveness and identify/implement actions for continuous process improvement. Apply technical knowledge and problem-solving abilities to ESH issues, demonstrate the ability to work independently, and interact with leadership on a peer-level basis. Represent the ESH organization across multiple levels of the company and demonstrate the...

Description: You will be a Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team develops cutting edge circuit boards, interface cards and supporting hardware for our customer that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout on program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Working within the Electrical Engineering team and cross functional teams to effectively address integration and interface challenges • Defining, refining, and documenting system, performance, and interface requirements • Supporting development of multiple circuit card assemblies • Managing bill of materials, part sourcing, and build-up...

Description: You will be the Automated Test Equipment (ATE) Test Engineer for a new datalink program supporting our Integrated Air and Missile Defense (IAMD) portfolio of products. Our team is responsible for ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for supporting test systems, providing technical expertise, and driving improvements to test equipment and software. You will work with a range of technologies, including TestStand®, LabVIEW®, and Python to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: • Designing, Integrating, and Supporting test equipment hardware and software as needed • Analyzing failures associated with test equipment and providing recommended solutions •...

Description: Lockheed Martin Missiles and Fire Control is seeking a Computational Design Engineer, Sr. to join our inter-disciplinary computational design team. The team consists of professionals with backgrounds in engineering, physics, visual effects, 3D animation, simulation analysis, software development, and manufacturing technologies. The team works on a broad range of design problems and seeks to solve the design problems by creating novel geometry and reusable procedures that lead to reliable, high performance, cost effective, and manufacturable components. The team is small so there are opportunities to meaningfully contribute in many ways. The computational designer will work with subject matter experts to understand the design problem at hand, potential geometric solutions, previous efforts, performance requirements, and other important factors to guide the design process. The computational designer will use their creativity and expertise along with the guidance from...

Description: Lockheed Martin Missiles and Fire Control is seeking a Computational Designer to join our inter-disciplinary computational design team. The team consists of professionals with backgrounds in engineering, physics, visual effects, 3D animation, simulation analysis, software development, and manufacturing technologies. The team works on a broad range of design problems and seeks to solve the design problems by creating novel geometry and reusable procedures that lead to reliable, high performance, cost effective, and manufacturable components. The team is small so there are opportunities to meaningfully contribute in many ways. The computational designer will work with subject matter experts to understand the design problem at hand, potential geometric solutions, previous efforts, performance requirements, and other important factors to guide the design process. The computational designer will use their creativity and expertise along with the guidance from subject...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for a Design Verification Testing Lead Engineer for our beautiful Grand Prairie, TX site! You will be the Design Verification Testing (DVT) Lead Engineer for the RF Sensor Product Center (RFSPC) in testing across various missile flight environments, ensuring the development of reliable and robust products. This candidate will be responsible for planning, executing, and analyzing DVT activities, as well as developing a comprehensive plan for production latent manufacturing defect testing. The successful candidate will work closely with cross-functional teams,...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an Guidance, Navigation, and Control (GNC) Engineer who will specialize in Modeling and Simulation of complex technical solutions. What You Will Be Doing This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control. Modeling & Simulation Engineer tasks include: • Design and documentation of model and simulation requirements and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for the Next Gen Short Range Interceptor (NGSRI) program. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for the Guidance Electronic Components Assembly (GECA). • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control (MFC) – Next Gen Short Range Interceptor (NGSRI) team. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems running reliably in harsh, radiation rich environments. What You Will Be Doing As the Circuit Card Design Engineer you will lead the architecture, schematic capture, and layout of multiple circuit card assemblies for the NGSRI Guidance Electronic Components Assembly (GECA). You will partner with cross functional engineers to drive designs through the Design Assurance process, from concept through procurement and test. Your responsibilities will include: • Developing and refining system, performance, interface, and environmental requirements for GECA circuit cards. • Capturing schematics and coordinating with EPCAD for layout and signal routing optimization. • Conducting trade studies to evaluate design options and...

Description: You will be the Environmental Technician for the Environmental, Safety & Health (ESH) team. Our team is responsible for supporting the Missiles & Fire Control‑Dallas site’s hazardous waste program. What You Will Be Doing As the Environmental Technician you will support the growing and dynamic operations of the Missiles & Fire Control – Dallas site in the ongoing management and enhancement of the hazardous waste program. As part of the Environmental Safety & Health (ESH) Department, candidate will be responsible for moving and transporting waste materials, empty containers and other necessary materials throughout the facility as required by the ESH department. Your responsibilities will include: Perform segregation, pouring/transferring into drums, packaging, and loading of liquid and solid waste materials. Ensure drum count is correct, internal labels are correct, and drum conditions are shippable in accordance with...