60 test technician jobs found

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, precision oscilloscopes, signal generators, RF power amplifiers, power meters, network analyzers/VNAs (PNA/PNA X), spectrum analyzers (phase noise/spur mode), vector signal analyzer, noise figure meters (or built in NF option), phase noise analyzers, data acquisition/test automation hardware (PXI, NI DAQ, USB digitizers), and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including a...

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, oscilloscopes, signal generators, power meters, network and spectrum analyzers (including multi function PNA/PNA X platforms), data acquisition units and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including RF testing and troubleshooting of microwave/electronic subsystems, and with a proven ability to set up, operate, and interpret results from the core suite of RF test equipment....

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Description: Work Schedule: Sunday - Wednesday (6AM - 4:30PM) Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking an...

Description: Work Schedule: Sunday - Wednesday (6AM - 4:30PM) Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Lockheed Martin Space is seeking an...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator, and builder. Our amazing people are on a mission to make a difference in the world and every day we use our unique skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems. Our culture encourages employees to dream big, perform with excellence and create incredible products. We provide the resources, inspiration and focus and if you have the passion and courage to dream big, we want to build a better tomorrow with you. Every day, our 115,000 employees come to work with one focus – our customers’ missions. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience, and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 1 st Shift, 3 -12hrs shifts, Friday, Saturday, Sunday 6a-630p." Basic Qualifications: • Must work a 3-12 shift (6:00a to 630p, Friday/Saturday/Sunday) • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and weekends to support key critical...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: Basic Qualifications : • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and...

Description: This Mid-Level Antenna Test Technician role is designed to build on your Mechanical and Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Antenna testing using RF equipment and Anechic Chambers at our Littleton, Colorado manufacturing facility. This role is will primarily work 1st shift, 9-80 schedule (every other Friday off), shift starts at 6a. Basic Qualifications: • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations-OT is necessary in this position as is the ability to work occasional holiday and weekends to support key critical business operations. • Ability to decipher and follow various...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Perform the setup, modification and servicing of equipment designed to simulate environmental conditions encountered in launch and space environment such as vibration, structural stress, thermal and atmospheric changes and operate such equipment to perform tests and accumulate data on any one major vehicle system or subsystem relative to the reaction of the test item to conditions under which the item is tested. Determine and accomplish the appropriate setup of test equipment and test specimen to perform tests and obtain test data at the system or subsystem level following defined procedural steps. Operate and monitor equipment such as but not limited to high vacuum and cryogenic systems, solar simulation apparatus, closed loop vibration...

Description: Performs non-destructive testing (NDT) on materials, manufactured items, and components. Inspects metallic, non-metallic, and composite materials, parts, and assemblies for defects using automated and manual NDT methods including ultrasound, infrared thermography, radiography, penetrant, magnetic particle, eddy current, and visual testing. Reads and interprets technical procedures and work instructions to conduct evaluations for acceptance/rejection of hardware/products. Provides other technical support for all LM Space programs and sites. Works primarily with a team but also works independently to perform day-to-day tasks. Additionally, works with remote teams of NDT personnel. Supports program-required inspections during off-shifts, sometimes with short notice, to ensure program hardware production is on-schedule. Upon starting in your new role, your manager and senior NDT engineers will help you develop a plan to acquire and maintain multiple LM Space NDT Level II...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. THE WORK Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs...

Description: Possess a working knowledge of basic mechanical and electro-mechanical systems and possess a knowledge of basic shop theory and practices, including safety regulations, necessary to prepare vehicle and AGE mechanical and electro-mechanical systems and equipment for test launch purposes. Possess a knowledge of working characteristics of materials used in vehicle manufacture and propulsion. Normally requires two years of technical training beyond high school plus one year of related mechanical experience. Determine from instructions and other data the method and sequence of operations to be performed. Assist Engineering and/or Technicians in the development of structural, hydraulic, propellant, pneumatic and environmental control systems including fabricating, assembly and troubleshooting of vehicle and AGE mechanical, electro-mechanical, and fluid systems. Assist Engineering and/or Technicians in the operation of such systems during systems test and launches;...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Staff RF Engineer will support the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: About Lockheed Martin Space: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. -- For over 60 years, the Fleet Ballistic Missile (FBM) team has...

Description: You will be a Focal Plane Array Process Engineer with our Infrared Sensors Business on site in Goleta, CA. Our team is responsible for developing and manufacturing advanced Focal Plane Arrays (FPAs), and we are looking for a talented engineer to join our team. What You Will Be Doing As a Senior FPA Process Engineer, you will be responsible as the subject matter expert for fabrication and execution of advanced Focal Plane Array (FPA) including wicking, substrate thinning, dicing, and flip-chip bonding for hybridization, a key step in the manufacturing process imaging devices. You will play a critical role in developing and optimizing the processes, procedures, tooling, and equipment to maximize yield, efficiency, and throughput and methodologies used to precisely align and bond detector arrays and readout integrated circuits (ROICs), creating high-performance FPAs. You'll work in a fast-paced, high-mix production environment and contribute to the advancement of...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a health, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Space is seeking a Mechanical and/or Electrical Systems Integration & Test Engineer - in Kennedy Space Center, Florida to plan and author procedures for the disassembly of the Orion Spacecraft post-flight. This...

Description: You will be a Focal Plane Array Process Staff Engineer with our Infrared Sensors Business on site in Goleta, CA. Our team is responsible for developing and manufacturing advanced Focal Plane Arrays (FPAs), and we are looking for a talented engineer to join our team. What You Will Be Doing As a Staff FPA Process Engineer, you will be responsible for the technical and production leadership in the fabrication and execution of advanced Focal Plane Array (FPA) including wicking, plasma system, substrate thinning, dicing, Anti-Reflection (AR) coating, CMP, Reflow and flip-chip bonding for hybridization, a key step in the manufacturing process imaging devices. You will play a critical role in developing and optimizing the processes, procedures, tooling, and equipment to maximize yield, efficiency, and throughput and methodologies used to precisely align and bond detector arrays and readout integrated circuits (ROICs), creating high-performance FPAs. You'll work in a...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - Provide test engineering support to production program integrated product team (IPT’s). - Define test process plans identifying the sequence of required test steps. - Define required tools, instruments, fixtures, software, hardware, interfaces and test chambers required to execute the test process plan. - Develop tests and generate detailed test procedures including narrative, diagrams and photographs. - Generate detailed troubleshooting guides to aid in the troubleshooting and analysis of the root cause of test failures. - Use available test...