29 test technician jobs found in Littleton, CO

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, precision oscilloscopes, signal generators, RF power amplifiers, power meters, network analyzers/VNAs (PNA/PNA X), spectrum analyzers (phase noise/spur mode), vector signal analyzer, noise figure meters (or built in NF option), phase noise analyzers, data acquisition/test automation hardware (PXI, NI DAQ, USB digitizers), and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including a...

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, oscilloscopes, signal generators, power meters, network and spectrum analyzers (including multi function PNA/PNA X platforms), data acquisition units and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including RF testing and troubleshooting of microwave/electronic subsystems, and with a proven ability to set up, operate, and interpret results from the core suite of RF test equipment....

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator, and builder. Our amazing people are on a mission to make a difference in the world and every day we use our unique skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems. Our culture encourages employees to dream big, perform with excellence and create incredible products. We provide the resources, inspiration and focus and if you have the passion and courage to dream big, we want to build a better tomorrow with you. Every day, our 115,000 employees come to work with one focus – our customers’ missions. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience, and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 1 st Shift, 3 -12hrs shifts, Friday, Saturday, Sunday 6a-630p." Basic Qualifications: • Must work a 3-12 shift (6:00a to 630p, Friday/Saturday/Sunday) • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and weekends to support key critical...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: Basic Qualifications : • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and...

Description: This Mid-Level Antenna Test Technician role is designed to build on your Mechanical and Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Antenna testing using RF equipment and Anechic Chambers at our Littleton, Colorado manufacturing facility. This role is will primarily work 1st shift, 9-80 schedule (every other Friday off), shift starts at 6a. Basic Qualifications: • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations-OT is necessary in this position as is the ability to work occasional holiday and weekends to support key critical business operations. • Ability to decipher and follow various...

Description: Performs non-destructive testing (NDT) on materials, manufactured items, and components. Inspects metallic, non-metallic, and composite materials, parts, and assemblies for defects using automated and manual NDT methods including ultrasound, infrared thermography, radiography, penetrant, magnetic particle, eddy current, and visual testing. Reads and interprets technical procedures and work instructions to conduct evaluations for acceptance/rejection of hardware/products. Provides other technical support for all LM Space programs and sites. Works primarily with a team but also works independently to perform day-to-day tasks. Additionally, works with remote teams of NDT personnel. Supports program-required inspections during off-shifts, sometimes with short notice, to ensure program hardware production is on-schedule. Upon starting in your new role, your manager and senior NDT engineers will help you develop a plan to acquire and maintain multiple LM Space NDT Level II...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space. At the dawn of a new space age, Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing men and women are on a mission to make a difference in the world and every day we use our unique skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems. Do you want to be part of a culture that inspires employees to envision the impossible, perform with excellence and build incredible products? We provide the resources, inspiration and focus and if you have the passion and courage to dream big, we want to build a better tomorrow with you. We are seeking an Electromechanical / Property Coordinator Technician Specialist to perform a wide variety of task requiring mechanical fabrication, Property and asset tracking and test skills to support lab operations. This position is for an mid-level Electromechanical / Property...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description: About Lockheed Martin Space: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. -- The Support Equipment Technician serves as the backbone of...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The Field Technician will perform a variety of duties in the electronic, mechanical,...

Description: Job Description : Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The Field Technician will perform a variety of duties in the electronic,...

Description: Instrumentation involves measuring, monitoring, and controlling process variables (e.g., pressure, temperature, flow, level) through sensors, transmitters, and controllers to ensure safety, efficiency, and automation. An electrical technician applies electrical/electronic theory to help engineers design, develop, test, and maintain electrical equipment, assembling and troubleshooting complex systems. Together, they integrate measurement and control hardware with hands‑on expertise to support reliable, testing and Data gathering. Basic Qualifications: • An understanding of instrumentation set up and data gathering • An understanding of Electrical wiring and testing of 120, 220, and 440 volt equipment • Trouble shooting skills for both instrumentation and Electrical systems • Must be a US Citizen with the ability to obtain and hold a secret clearance Desired Skills: • Set up instrumentation and data collecting systems. • Training in electrical systems, being able...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description: Test Engineering Lab Manager with oversight of the staff, equipment and facilities of the Denver Electromagnetics Lab. These labs include the EMI chambers and Near Field Scanner housed within SSB, Compact Test Range at ARL, Anechoic chambers at GPF and Gateway, as well as the Antenna Test Range. Test articles include spacecraft, spacecraft subsystems, missiles, and associated components. This position involves a mix of personnel oversight, ongoing equipment maintenance, repair and modernization, and mentoring of new staff on the test engineering process and equipment usage. The Electromagnetics Lab consists of a staff of ~7 test engineers and technicians and the position will require management of staff training and certifications as well as fostering employee development. This position will manage the workload of the group, set work priorities within the lab, identify a comprehensive range and equipment upgrade strategy, and at times contribute to the technical...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. This position is in one of the Coolest places to work: Denver, Colorado. Lockheed...

Description: Lockheed Martin is seeking a Composites Manufacturing Engineer for a position at the Mechanical Manufacturing Center (MMC), located on the Waterton Campus in Littleton, Colorado. The MMC Manufacturing Engineering team supports a variety of production areas, including additive manufacturing, traditional machining, mechanism assembly, composite fabrication, and structural assembly. The chosen candidate would join our collaborative team, supporting the composites fabrication area and products such as flat, curved, or cylindrical composite laminates and sandwich panels. Scope of responsibilities will include: • Providing shop floor support, maintaining manufacturing plans, tooling requirements, engineering change implementation and coordinating changes in the build process for a specific program or production area. • Accomplish results by utilizing multi-functional team, including Technicians, Quality Assurance, Manufacturing and Test Engineering, MRP/Parts Production...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. This position performs various tasks required to support the (ATLO) Assembly, Test, and...