80 quality assurance inspector jobs found

Standard Job Description What You Will Be Doing: This position will be part of the Aircraft Maintenance Team supporting U-2 Avionics Technical Refresh (ATR) and Programmed Depot Maintenance (PDM) Operations at Beale Air Force Base California. Performs the inspection of aircraft for functional operation and conformance to government and company standards and specifications. Inspects the installation and operation of electrical, avionics, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of the aircraft. Ensure aircraft are in good mechanical condition and safe for flight. Ability to plan/conduct Process Compliance Surveillance Program (PCSP) audits. Ability to conduct incident and/or mishap investigation audits, prepare quality documentation and reports by collecting, analyzing, and summarizing information, and trends including failed process, recalls, corrective actions, and validations. Ensure aircraft records are updated...

Standard Job Description You will be the Quality AssuranceLead Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Description: Ensure the compliance of parts and assemblies to contractual requirements by performing first article, in process and final mechanical inspection through the use of drawings, processes, wire connection lists, mil specs and work instructions in conjunction with hand tools and measuring equipment. Properly document and disposition defects found during mechanical inspections and communicate results to the responsible activities for use in root cause analysis and corrective action implementation. Familiarity with the use of PC based applications used in defect reporting. Interpret and execute working level policies and procedures to ensure contractual and ethical compliance. Assist in the identification, documentation, control and disposition of non conforming material. Ability to work in a team environment with minimal supervision. May be requested to climb to perform their job responsibilities. US citizenship is required. This position is contingent on contract award...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Sustainment Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a First Shift position on a 4x10A work schedule...

Quality Assurance Inspector Specialist - 2nd Shift Job Description : You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to...

Standard Job Description Lockheed Martin Aeronautics Field Sustainment is seeking an Aircraft Maintenance Associate Manager to lead and manage the Interim Contractor Support (ICS) maintenance team supporting F‑35 operations at Ghedi Air Base, Italy. This position provides direct leadership, establishes maintenance priorities, and serves as the primary interface with Italian Air Force squadron leadership regarding F‑35 maintenance requirements and production matters.   What You Will Be Doing: The Aircraft Maintenance Associate Manager directs the ICS maintenance team in alignment with daily maintenance objectives, integrates closely with Italian Air Force leadership, and advises on maintenance priorities and operational impacts. The role oversees all ICS activities, including over‑the‑shoulder support, On‑the‑Job Training, and Lockheed Martin touch‑labor efforts in support of the customer’s maintenance organization. Responsibilities include managing personnel actions...

Standard Job Description At Lockheed Martin Australia, we believe that when people are empowered, inspired, and supported, they can achieve extraordinary things. We embrace flexibility, so our people can be their best inside and outside of work. We champion inclusion and continuous learning, ensuring all voices are heard and valued. And we thrive on collaboration, turning challenges into opportunities for growth and innovation.  As a leader in national security, our innovative and diverse programs create a more secure future for Australia across space, air, land, sea, and cyber domains. Every day is a chance to solve the world’s most complex challenges and make a profound impact. Experience it here. Following  the decision by the Australian Government to acquire UH-60M Black Hawk helicopters from the US Government, Lockheed Martin Australia  has established a core team of experienced military Rotary Wing professionals to support the initial procurement and ongoing...

Description: - This position is part of the Quality Assurance Support Team for the F-35 Flight Test Program at NAS Patuxent River, MD and will be responsible for completing all required inspections associated with on-aircraft maintenance, repair, and modification. The inspector inspects/verifies work for quality, completeness, proper function, and adherence to processes, procedures, and specifications. In addition, the inspector will inspect material review items for acceptability after disposition has been completed. The position requires accurate and detailed descriptions of non-compliant conditions to facilitate efficient Material Review decisions. Performs final inspection and makes final acceptance of vehicle for release to flight status. May perform surveillance inspection and other related inspection assignments incidental to the primary duties. Position may require up to 10% travel to support off-site testing. - Must be able to initially achieve an Interim Secret and...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. This position is located at a facility that requires special access. Must be a U.S. Citizen. Basic Qualifications: - Electronic Circuit Card experience or equivalent technical proficiency. - Quality...

Description: - This position is part of the Quality Assurance Support Team for the F-35 Flight Test Program at NAS Patuxent River, MD and will be responsible for completing all required inspections associated with on-aircraft maintenance, repair, and modification. The inspector inspects/verifies work for quality, completeness, proper function, and adherence to processes, procedures, and specifications. In addition, the inspector will inspect material review items for acceptability after disposition has been completed. The position requires accurate and detailed descriptions of non-compliant conditions to facilitate efficient Material Review decisions. Performs final inspection and makes final acceptance of vehicle for release to flight status. May perform surveillance inspection and other related inspection assignments incidental to the primary duties. Position may require up to 10% travel to support off-site testing. - Must be able to initially achieve an Interim Secret and...

Description: - This position is part of the Quality Assurance Support Team for the F-35 Flight Test Program at NAS Patuxent River, MD and will be responsible for completing all required inspections associated with on-aircraft maintenance, repair, and modification. The inspector inspects/verifies work for quality, completeness, proper function, and adherence to processes, procedures, and specifications. In addition, the inspector will inspect material review items for acceptability after disposition has been completed. The position requires accurate and detailed descriptions of non-compliant conditions to facilitate efficient Material Review decisions. Performs final inspection and makes final acceptance of vehicle for release to flight status. May perform surveillance inspection and other related inspection assignments incidental to the primary duties. Position may require up to 10% travel to support off-site testing. - Must be able to initially achieve an Interim Secret and...

Standard Job Description WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicatedto pushing the boundaries of innovation and shaping the future of the industry. With a richlegacy of excellence and a commitment to delivering advanced capabilities to our customers,we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector throughgroundbreaking technology, advanced manufacturing processes, and a world-class team ofprofessionals. Our mission-driven approach and unwavering dedication to excellence ensurethat we continue to deliver superior products and solutions to our customers around the world. At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within ourcapacity – and yours as a Lockheed...

Standard Job Description WHAT WE’RE DOING At Lockheed Martin, quality is critical to mission success. Within the Electronics Production Center, we manufacture circuit card assemblies, cable assemblies, box assemblies, LRUs, stack assemblies, and related electronic products supporting radar programs and emerging new work. Our quality team ensures products are built, inspected, accepted, and delivered in compliance with engineering, customer, contractual, and regulatory requirements while driving production excellence and continuous improvement. THE WORK This requisition is for a Staff Quality Engineer supporting radar programs and new work within the Electronics Production Center. This role will serve as a senior quality presence on the production floor and a key voice for quality-related decisions, technical guidance, and issue resolution. The selected candidate will provide quality leadership in a high-mix, high-volume manufacturing environment with emphasis on...

Standard Job Description This position is for the Precision Strike Missile (PrSM) Program to support the Quality Development Team. The role is responsible for applying systems‑level qualityengineering principles to ensure that missile subsystems and integrated assembliesmeet all reliability, safety, and performance requirements throughout the productlife‑cycle. They will be responsible for all aspects of Quality across the programs life-cycle including proposals, contract review, start-up, development, and transition toproduction support. Requires an understanding of quality tasks across quality functionsincluding hardware, software, systems and suppliers/subcontractors, and customers.Proficient in company policies. Partners with program teams as the Quality Lead fordesign and development. Performs contract reviews and flows down contract qualityrequirements to quality team, including suppliers.   What You Will Be Doing As the Quality Engineer you will be responsible for...

Standard Job Description You will be the Quality Engineer Sr for the Quality Engineering Team. Our team is responsible for ensuring product and process quality across the product lifecycle.   What You Will Be Doing As the Quality Engineer Sr you will be responsible for applying quality principles, conducting technical evaluations, and driving continuous improvement across design, production, and supplier domains. Your responsibilities will include, but are not limited to: Apply quality principles across design, incoming material, production control, and supplier processes. Conduct technical evaluations of product requirements, specifications, drawings, and procedures. Lead product failure investigations and drive corrective and preventive actions. Develop and implement strategies to improve internal and supplier performance. Design and analyze inspection and testing processes, performing statistical analysis.   Why Join Us The ideal candidate is...

Standard Job Description Analyzes, researches, designs and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Develops, analyzes and applies material properties and design allowables, processing processes and quality engineering specifications. Material analyses may include failure analysis of components, systems and subsystems, life predictions, and definition and requirement specifications. May review and approve subcontractor material processing procedures.  This is a second shift position working 2pm to 12am midnight Tuesday through Friday. Basic Qualifications Bachelor's degree from an accredited college in Chemistry, Chemical...

Standard Job Description Provides a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer. You will be a part of the Aircraft Maintenance Training Team at MCAS Miramar, San Diego supporting F-35 Maintenance activities across the full spectrum of Field Operations at various F-35 operating locations both inside the US and internationally.   What You Will Be Doing: This position serves as the Subject Matter Expert (SME) in the area of F-35 Aircraft Maintenance, Joint Technical data, Computerized Maintenance Management System (CMMS) Documentation, Action Request processing, Formal On-The-Job Task training/Certifier, and training development/design. The position also...

Standard Job Description IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. OCCUPATIONAL SUMMARY Perform non-destructive evaluation of materials, weldments, fabricated parts and assemblies through the use of non-destructive techniques (including ultrasound, magnetic particle, dye penetrant) and precision mechanical measurement devices (optical comparators, surface plates, gage blocks etc.). Interpret radiography reports and evaluate NDE services rendered by outside contractors. Inspect intricate machined parts, tooling fixtures, templates, patterns and gages used in fabrication of new, developmental and/or mock-up assemblies for conformance to specifications, workmanship, dimensional accuracy and blueprints. Train and certify inspectors and technicians in special skills as soldering,...