10 test engineer jobs found

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Lockheed Martin Aeronautics is seeking a full-time Material Review (MRB) Engineer located onsite at Edwards AFB, California covering F-35 Flight Test and depot level support for modification repairs.  The candidate must possess a unique set of skills combining strong engineering credentials with a solid understanding of depot practices and procedures. Primary duties of this assignment include anomaly investigation, technical solution development, preparation and release of dispositions for discrepancies on aircraft high performance airframe parts, electrical installations, fuel and hydrualic systems, and LO finishes in support of F-35 Flight Test mission objectives. Position requires a broad knowledge of aircraft maintenance and test support with the flexibility to work off hours and weekends.  Additional responsibilities include: - Coordinate across a large number of functional areas, including Stress/Service Life, Quality Assurance, Structures and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment as a C-130J Avionics and Electrical Field Service Engineer (FSE). This position is located at a customer operating site in Saudi Arabia.   What You Will Be Doing: Provide a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer. The candidate will serve as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) technical interface to the on‑site customer, resolving issues that arise from any activity related to the C‑130 aircraft, and will be a Subject Matter Expert (SME) in Avionics and Electrical Systems disciplines.  Additionally, the role requires deep technical expertise and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Field Service Engineer (FSE). This position is located in Sabena, Belgium and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency.  What You Will Be Doing: Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. Provide advice in the...

Standard Job Description You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Mon-Thurs 4x10A - 2nd Shift What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible  for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards.  The Production Flightline APG, F-16 Technician Level 3 will also need to be knowledgeable in aircraft systems operation and maintenance to include:  • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery   The candidate will be required to:   • Comprehend documents such as safety rules, operating l be required to be a member of the...

Standard Job Description You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~   What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible  for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards.  The Production Flightline APG, F-16 Technician Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include:  • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery   The candidate will be required to:   • Comprehend documents such as safety rules, operating l be...

Standard Job Description   You will be the Avionics Technician Lvl 3 for the Lockheed Martin Greenville Avionics Backshop Team. Our team is responsible for building and repairing electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  ~This Position will be Mon-Thurs 4x10A Week schedule- 2nd Shift 3PM-130AM~   What You Will Be Doing   As a Backshop Avionics Technician Lvl 3 you will be responsible for building and repairing wire harnesses. Testing/installing electrical harnesses/components, routing various wire/cables, terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals....

Standard Job Description You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools.  What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. Proficient in AI prompting as it applies to this position and practice     What’s In It For You: 3 day weekends...

Standard Job Description You will be the Production Flightline Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Flightline Team. Our team is responsible for Final flight ops and delivery to include flight operations, installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline  Avionics, F-16 Technician Lvl 3 you will be responsible for Flight Operations, Launch and Recovery, Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: •...