30 construction jobs found in Fort Worth, TX

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility, particularly in the area of military fiber optics. Performing Fiber Optic terminations and Fiber Optic repair is the primary job role. Candidate must be able to travel and be able to work on or around military aircraft. The ability to learn and operate fiber optic termination equipment and fiber optic test equipment. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of fiber optic and copper wire harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize...

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: What You Will Be Doing As a Facilities Engineer you will be responsible for: • Under general supervision of the Team Lead, determines and develops approach in managing High and Low Voltage Infrastructure projects for advanced aeronautical manufacturing plant; • Monitors all phases of construction including design, compliance, construction, occupancy and quality control; • Understanding and wide application of technical principles, theories and concepts in the field; • Knowledge of design codes and standards, such as NEC, NESC, NEMA, IEEE, ANSI, IESNA and UFC’s; Ability to develop a list of codes criteria (Code Audit) to be reflected in the projects; • Manage and administrate Corporate capital, Overhead and Government-funded infrastructure projects budgets; • Perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams); • Develop Statements of Work, cost estimates and budgets, timelines and...

Description: This occupation requires the inspection of completed flat and contoured bonded panels and composite/laminate details by the use of non-destructive methods as afforded by ultrasonic and other comparable evaluation equipment and processes to verify structural integrity. Performs visual and/or dimensional inspection of welded or shot-peened parts/assemblies and in-process inspection of welding operations to assure blueprint compliance and correct processing. Basic Qualifications: Must meet level II certified able in 3 out of 5 nondestructive testing disciplines. Desired Skills: Experience with CR Radiography NDI level II certified for Dye Penetrate, Eddy Current, Ultrasonic or Radiography. Experience with automated inspection equipment Experience in Weld inspection Texas State Radiography Certified Certified Weld Inspector Clearance Level: None Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing...

Description: Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE). Requires sound knowledge of precision measurement methodologies and principles. Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency. Must have an understanding of measurement traceability and be competent interpreting and converting specifications. Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed. Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements. Basic Qualifications: Experience with the use of precision measuring principles, theories and units of...

Description: We are Lockheed Martin This position is for a Flight Test Instrumentation Electrical Design Engineer. The selected candidate will participate in the electrical design efforts for the F-16 and F-22 lines of business. Primarily function as Electrical Engineer at Fort Worth supporting test sites and local activities. The candidate will be required to perform electrical design activities for the installation of flight test instrumentation electrical components to fulfill system design block diagrams of instrumentation systems. The candidate will be responsible for developing, understanding and releasing engineering drawings, creating technical designs using CATIA, selecting and understanding electrical components, creating work instructions, monitoring fabrication activities, providing liaison support with the fabrication shop and test sites, and providing mod support. This position will be responsible for communicating and coordinating with flight test instrumentation...

Description: What We're Doing Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide test systems for advanced military applications, including the F-16 and the Patriot Missile Battery. The Work As a member of our Test Program Set Engineering team, you will: * Design, develop and integrate test programs to be executed on Automatic Test Systems. * Comprehend electrical designs, including electrical schematics, cable drawings, and supporting electrical documentation. * Design Test Program Hardware Architecture * Perform failure analysis on electrical systems. Who We Are We create unparalleled readiness today and into the future, no matter what the mission may be here at Lockheed Martin Rotary and Mission Systems. Who You Are You can work on a team with other engineers. You can be flexible, motivated, dedicated, detail-focused, team-oriented, and capable of multi-tasking. Why Join Us Our team is dedicated to...

Description: At Lockheed Martin Aeronautics we are committed to shaping the future of aviation! Our Aeronautics Supply Chain team is passionate about delivering innovative, affordable, and agile solutions that exceed our customer’s expectations. The supply chain team touches every product and service we deliver and enables our customers to do the impossible every day. At Aeronautics, we leverage problem solving, creativity, and data to tackle the most exciting challenges in the industry. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. You have arrived at your career destination! Join us! Watch this video to learn more about why we work at Lockheed Martin! Who You Are As a Global Supply Chain Contracts Analyst, Staff you are an experienced professional with a legal, contracts or supply chain management background. You have a comprehensive understanding of the FAR and DFARS with extensive supplier management...

Description: What You Will Be Doing: The position is on the Integrated Data Solutions Data Solutions and Modeling Team within the F-35 Sustainment DSA organization. Responsibilities to include: 1) Serve as the full-time point of contact for the documenting of processes and procedures to construct data model attributes contained in CDRL deliverables 2) Aid in the Development, Construction, and Assessment of Data Model Elements/Attributes 3) Construct and deliver contractually obligated documents 4) compare and contrast historical changes/performance over time of data elements/attributes. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security. Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the...

Description: We are Lockheed Martin How to be part of our Skunk Works © Team - Join Program Planning! This position provides planning/scheduling support for Contracts within the Skunk Works © by giving Day-to-Day direction to the Integrated Planning and Proposals team. Exercise leadership on near-term to long-range PP&I initiatives. Lead the team to provide integrated program planning support for Skunk Works © Contracts and proposals. Lead and serve as the SME for scheduling matters related to proposal planning products. Ensure applicable scheduling practices are actively coordinated, at all levels, with related functional disciplines. This position regularly interacts with Aero Function on matters related to execution and proposal schedules and reviews and is instrumental in rolling out Start Green, Stay Green initiatives. What is Program Planning to Lockheed Martin? Integral to Lockheed Martin's Program Management & Enterprise Performance, it organizes tasks...

Description: You will be the General Maintenance Mechanic for the Maintenance Team. Our team is responsible for ensuring operational readiness of plant facilities and supporting production equipment. What You Will Be Doing As the General Maintenance Mechanic you will be responsible for a broad spectrum of construction, maintenance, repair, and fabrication tasks that keep our facilities running smoothly. Your responsibilities will include, but are not limited to: Perform preventative maintenance on rooftop units, air handlers, hoists, paint booths, and other critical equipment. Construct and repair structures such as storage sheds, metal frames, security fencing, and equipment foundations. Fabricate and install steel, sheet‑metal, shelving, racks, benches, and air‑duct systems. Operate heavy machinery, rig loads, and move large equipment safely. Maintain clean work areas, report issues, and support the lead supervisor. Why Join Us Do you...

Description: You will be the Maintenance Carpenter for the Carpentry Team. Our team is responsible for delivering high‑quality finish carpentry, custom furniture, and structural woodwork throughout Lockheed Martin facilities. What You Will Be Doing As the Maintenance Carpenter you will be responsible for interpreting blueprints, fabricating wood components, and installing finished carpentry solutions. Your responsibilities will include: Construct, alter, and repair office partitions, cabinets, doors, windows, and custom furniture. Read and interpret drawings, sketches, and verbal instructions to develop accurate work plans. Select appropriate materials, create work‑holding fixtures, and fabricate components using shapers and other woodworking tools. Maintain a clean, organized work area and safely operate mobile equipment for material handling. Identify dimensional errors, recommend substitute materials, and ensure final installations meet...

Description: You will be the Project Manager (Level 5) for the Construction Management team. Our team is responsible for overseeing and executing facility construction activities—including renovations, expansions, and new builds—at the Grand Prairie, TX MFC site. What You Will Be Doing As the Project Manager (Level 5) you will be responsible for guiding projects from concept through final completion while ensuring schedule, cost, and quality targets are met. Your responsibilities will include, but are not limited to: Lead design development, procurement, and contractor selection, including bid walk‑throughs and evaluation. Develop and maintain detailed project schedules, coordinating access and resources across all stakeholders. Manage contract performance, financials, and capital‑asset accounting, ensuring accurate invoicing and cost control. Conduct periodic and final inspections to verify code compliance, quality standards, and user acceptance....

Description: You will be the Facilities Engineer Sr (Level 3) for the Facilities Engineering team. Our team is responsible for planning, designing, and overseeing the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. What You Will Be Doing As the Facilities Engineer Sr (Level 3) you will be responsible for planning, designing, and overseeing facility and equipment modifications while ensuring compliance with company and government restrictions. Your responsibilities will include, but are not limited to: Plan, design, and oversee facility and equipment modifications while ensuring regulatory compliance. Gather and analyze data, develop detailed CAD (Auto‑CAD) layouts, and coordinate design criteria with architecture/engineering firms. Prepare cost estimates for construction and facilities acquisition, covering equipment, labor, materials, and related expenses. Inspect construction and...

Description: You will be the Facilities Project Lead for the Facilities Projects team. Our team is responsible for delivering strategic facility and equipment solutions that enable manufacturing excellence. What You Will Be Doing As the Facilities Project Lead you will be responsible for planning, directing, and managing all phases of facility modification and capital projects, ensuring they align with organizational efficiency and budget constraints. Your responsibilities will include, but are not limited to: Lead cross‑functional capital and overhead projects supporting manufacturing and production. Design, coordinate, and oversee facility and equipment modifications while ensuring compliance with company and government regulations. Gather and analyze data to drive design decisions, feasibility studies, and schedule commitments. Partner with architecture and engineering firms to develop design criteria, layout drawings, and manage design reviews....

Description: You will be the Electrical Engineering Principal – Seeker & Radar Simulation for the Missile Fire Control (MFC) Seeker Integration team. Our team delivers high performance seeker and radar subsystems for advanced missile programs, managing real time hardware in the loop (HITL) simulation and stimulation to validate flight critical electronics. What You Will Be Doing As the Electrical Engineering Principal you will be responsible for architecting, implementing and validating seeker technology hardware and FPGA based DRFM solutions that enable realistic radar system simulation. You will guide cross functional teams through HITL test campaigns, ensuring compliance with MFC design processes and facility requirements. Your responsibilities will include: • Leading integration of missile borne radar seekers, including hardware in the loop (HITL) simulation and stimulation using the ACTS II facility. • Designing, developing and validating FPGA based DRFM (Digital...

Description: Overview We are seeking a highly skilled Facilities Mechanical Engineer to join our team, responsible for planning, designing, and overseeing the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. Our ideal candidate will have an experienced mechanical engineering background with an in-depth understanding of various mechanical systems, including HVAC, compressed air, vacuum, DI water, plumbing, and site utilities. What You Will Be Doing As a Facilities Mechanical Engineer, you will be responsible for planning, designing, and overseeing facility and equipment modifications, ensuring compliance with company and government restrictions. You will gather and review data to inform design decisions, coordinate with architecture/engineering firms, and prepare estimates for construction and facilities acquisition. You will also inspect construction and installation progress, collect requirements from...

Description: We are Lockheed Martin You will be the Software Engineer Senior for the Mission Systems and Software team. Our team is within Mission Control Systems organization under Combat Systems and uses a wide application of technical principles, theories, and concepts in the software field to develop, integrate, and test software products for Advanced Development Programs. The Skunk Works (Lockheed Martin Advanced Development Program) is looking for world class talent in Software Development and Testing to be a part of a team that will carry on our 75+ year tradition making history in advanced aircraft development. What You Will Be Doing As the Software Engineer you will be responsible for all phases of developing software solutions for Command & Control Systems. Your responsibilities will include: • Generating requirements, system and software design and implementation • Integrating and flight test events • Adjudicating change requests as the software is updated,...

Description: You will be the Systems Engineering Stf for the Capability Integration Strategy Team which is responsible for driving integrated capability delivery across the Architecture Design Integration and Test Organization (ADI&T). What You Will Be Doing As the Systems Engineering Stf you will be responsible for shaping the technical roadmap, ensuring functional integration, governing releases, resolving anomalies, and delivering actionable data metrics. Your responsibilities will include: Lead the development and management of the technical roadmap and integrated JIRA backlog to align portfolio strategy with execution. Design and execute functional integration plans that validate capabilities across segments, domains, and operational scenarios. Establish and govern capability release processes, authoring System Release Memoranda and confirming compliance with technical and quality thresholds. Oversee end‑to‑end anomaly resolution, assessing...