15 quality engineer jobs found

Standard Job Description WHAT WE’RE DOING At Lockheed Martin, quality is critical to mission success. Within the Electronics Production Center, we manufacture circuit card assemblies, cable assemblies, box assemblies, LRUs, stack assemblies, and related electronic products supporting radar programs and emerging new work. Our quality team ensures products are built, inspected, accepted, and delivered in compliance with engineering, customer, contractual, and regulatory requirements while driving production excellence and continuous improvement. THE WORK This requisition is for a Staff Quality Engineer supporting radar programs and new work within the Electronics Production Center. This role will serve as a senior quality presence on the production floor and a key voice for quality-related decisions, technical guidance, and issue resolution. The selected candidate will provide quality leadership in a high-mix, high-volume manufacturing environment with emphasis on...

Standard Job Description You will be the Quality Engineer for the Quality Engineering Team. Our team is responsible for ensuring product and process quality across the product lifecycle. What You Will Be Doing As the Quality Engineer you will be responsible for applying quality principles and driving continuous improvement across design, production, and supplier activities. Your responsibilities will include, but are not limited to: Apply quality principles across design, incoming material, production control, and supplier processes. Conduct technical evaluations, inspections, and statistical analysis of products and materials. Lead failure investigations, material review board decisions, and corrective/preventive actions. Collaborate with program management, engineering, manufacturing, supply chain, and customers to ensure quality standards. Develop and maintain supplier certification programs and improve internal performance. Why...

Standard Job Description Develops, modifies and applies quality principles to the development and use of software and software-based systems for make and/or buy software products. Performs verification and validation of test equipment including hardware in the loop systems. Develops overall operating criteria to ensure implementation of the software quality program according to project, process and contract requirements and objectives. Designs and implements software development and maintenance processes. Defines audit strategy to ensure compliance to systems/software processes. Designs, specifies and conducts test methods for software inspection, verification and validation. Evaluates and analyzes software quality systems for deficiency identification and correction. Ensures measures meet acceptable reliability standards. Performs software product reviews against contractual, technical and/or process requirements. Reviews include requirement specifications, design documents,...

Description SAIC seeks an experienced and energetic Principal Integration Engineer to directly support the modernization of the space launch ranges, meeting mission requirements, providing range capabilities, and supporting the Assured Access to Space (AATS) mission. The overarching purpose of the program is to perform system modernization and digital transformation projects that will enable the acceleration of the space launch cadence to enable the Spaceport of the future. This position is located in Cape Canaveral, FL. Job Responsibilities: Defines discrete systems with processes to link together complex systems and components with software applications to perform as a coordinated whole. Uses a broad range of skills and a breadth of knowledge in several engineering/technology disciplines including systems and enterprise architecture, software and hardware engineering, interface protocols, and general problem-solving skills. Assist in the development of transition...

Description SAIC is seeking a Mechanical Engineer Associate to join in and support our team in Panama City Beach Florida. You will be working in a dynamic environment at our Holley Engineering and Integration Center. You will be supporting multiple Navy projects of various scales. You will hone your teamwork skills and gain engineering experience rapidly. As an engineering team member, you will: Develop and maintain drawings and technical documents around specific systems. This will require the direction of drafters and technical writers. Capture design requirements using MBSE principles Understand and use military and/or commercial specifications in development of drawings as well as understand mechanical stress/strain and how forces acting on parts produce stress/strain. Knowledge of Finite Element Analysis (FEA) is preferred. Work with Quality Assurance and Logistics Teams in development of drawings and to identify manufacturing discrepancies to ensure that...

Description SAIC is seeking an experienced Systems Enginee r to join and support our dynamic team in Panama City Beach, Florida. This is an excellent opportunity to grow your career while supporting multiple Navy projects of varying complexity. We are seeking motivated individuals eager to gain entry-level engineering experience in a collaborative environment with opportunities for professional development. As an engineering team member, you will apply your technical skills and aptitudes to solve problems, support project requirements, and grow as a systems engineer. You will gain exposure to the entire systems engineering lifecycle and play a role in the development, integration, and sustainment of critical Navy systems. Responsibilities will include but are not limited to: Support the development and documentation of system requirements using Digital Engineering (DE) and Model-Based Systems Engineering (MBSE) tools and principles. Perform requirements analysis,...

Description SAIC is seeking a Systems Engineer Associate to join and support our dynamic team in Panama City Beach, Florida. This is an excellent opportunity to grow your career while supporting multiple Navy projects of varying complexity. We are seeking motivated individuals eager to gain entry-level engineering experience in a collaborative environment with opportunities for professional development. As an engineering team member, you will: Apply your technical skills and aptitudes to solve problems, support project requirements, and grow as a systems engineer. You will gain exposure to the entire systems engineering lifecycle and play a role in the development, integration, and sustainment of critical Navy systems. Responsibilities will include but are not limited to: Support the development and documentation of system requirements using Digital Engineering (DE) and Model-Based Systems Engineering (MBSE) tools and principles. Perform requirements analysis, functional...

Long Description You will be the Program Manufacturing Engineer supporting Affortability/IRAD and MAC efforts as part of Air Dominance Operations team. Our team is responsible for creating and improving manufacturing strategies for complex missile assemblies, and we play a crucial role in developing and implementing solutions for technical and organizational challenges. What You Will Be Doing As the Manufacturing Engineer you will be responsible for driving improvement initiatives that support Air Dominance Production Operations. You will be tasked with improving the overall process of the build using complex, cutting edge technologies and automation. Supporting and participating in the strategy and execution of cost reduction initiatives across LM Sites and supply base. Support design, fabrication, assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description The coolest jobs on this planet...or any other...are with Lockheed Martin Space. Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems.  Do you want to join a team where employees envision the impossible, perform with excellence and build incredible products? Be a part of the Artemis and Orion teams taking astronauts to the Moon and beyond. This is your chance to be at the center of a generational program that will land the first woman and person of color on the Moon. As an ATLO (Assembly, Test, and Launch Operations) Electrical Test Engineer on the Orion program , you will be responsible for the planning, preparation, and execution of electrical integration activities for the Orion spacecraft for Artemis II (first crewed...

Standard Job Description What We're Doing Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. Based in Orlando, TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships and driving armored vehicles. TLS is the corporation’s hub for simulation, X reality, live-virtual-constructive capabilities, advanced training devices and full-service training programs. TLS also provides sustainment services such as supply chain and logistics IT solutions, spares and repairs, as well as automated test and support equipment. THE WORK This is a position for a Software Engineering Lead on F35 Pilot Training Devices (PTD). As a Staff Software Engineer for the PTD team,...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description You will be the HyperLynx Analog Simulation Engineer for the Circuit Card Design Technology Council within Lockheed Martin Missiles & Fire Control (MFC). Our council establishes the simulation standards, reusable model libraries and methodology that power every circuit card assembly (CCA) program across the MFC portfolio, ensuring mission critical hardware is designed with confidence and consistency. What You Will Be Doing As the HyperLynx Analog Simulation Engineer you will be responsible for leading SPICE based analog and mixed signal simulation work, authoring the department’s modeling standards, and partnering with Siemens technical leadership to shape the future of the HyperLynx/Xpedition tool suite. Your work will directly impact hardware designs from concept through verification and will be leveraged by programs for years to come. Your responsibilities will include: • Performing SPICE based analog and mixed signal simulations in Siemens...

Standard Job Description You will be the Subcontract Program Management Mgr for the Sniper Advanced Targeting Pod supply chain team. Our team is responsible for leading production, development and sustainment activities that support our US and allied warfighters.   What You Will Be Doing As the Subcontract Program Management Mgr you will be responsible for managing a dynamic team of Subcontract Managers and Procurement Representatives, driving strategic initiatives to ensure efficiency within the Global Supply Chain organization. Your responsibilities will include, but are not limited to: Oversee subcontractor efforts across all contract types, ensuring compliance with contractual requirements and company policies. Direct and manage cost, quality, schedule, financial, and technical performance of subcontracted systems. Develop and execute strategic sourcing and subcontract program management plans, addressing risk and program capture needs. Lead cross‑functional...

Description SAIC is seeking new team members to support the US Naval Education and Training Command (NETC) and Center for Information Warfare (CIWT) Programs based in Pensacola, FL this coming Spring 2026 pending award news. The team provides IT Cyber services, engineering sustainment activities, and Agile Scrum software development across multiple programs of record and IT initiatives. This supports various Programs of Record led by NETC N6 CIO and CIWT. Many roles will offer hybrid flexibility in Pensacola, FL, and local candidates are encouraged to apply. All positions require a minimum of a Secret clearance. Positions will be available in the following skill areas: NET Software Development - Experience in GUI design and development using ASP.NET, C#.NET, VB.NET, and AJAX, combined with robust expertise in data modeling and SQL Server. Proficient in object-oriented programming and have utilized Microsoft Enterprise Libraries within the Microsoft .NET 4.0...