14 quality engineer jobs found

Description SAIC is seeking a highly motivated and detail-oriented individual to join our team as a Manufacturing Engineer Senior. JOB DUTIES: In this role, you will be responsible for developing, implementing, and maintaining methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub-assemblies and final assemblies for the HERO-120 unmanned aerial vehicles. You may be responsible for the design arrangement of equipment within plant facilities to ensure most efficient and productive layout. You may be responsible for estimating manufacturing cost, determining time standards and making recommendations for tooling and process requirements of new or existing product lines. You will evaluate and incorporate inspection and test requirements into the production plan as needed. Inspect performance of equipment and tools to verify their efficiency and investigate and initiate corrective action of problems and deficiencies to...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Lockheed Martin Aeronautics is seeking a full-time Material Review (MRB) Engineer located onsite at Edwards AFB, California covering F-35 Flight Test and depot level support for modification repairs.  The candidate must possess a unique set of skills combining strong engineering credentials with a solid understanding of depot practices and procedures. Primary duties of this assignment include anomaly investigation, technical solution development, preparation and release of dispositions for discrepancies on aircraft high performance airframe parts, electrical installations, fuel and hydrualic systems, and LO finishes in support of F-35 Flight Test mission objectives. Position requires a broad knowledge of aircraft maintenance and test support with the flexibility to work off hours and weekends.  Additional responsibilities include: - Coordinate across a large number of functional areas, including Stress/Service Life, Quality Assurance, Structures and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description You will be the Industrial Engineer Senior - Level 3 for the Industrial Engineering Team which is responsible for driving operational excellence across our production and manufacturing facilities.   What You Will Be Doing As the Industrial Engineer Senior - Level 3 you will be responsible for analyzing workflows, enhancing processes, and delivering efficiency improvements that directly boost performance, reduce cost, and increase safety. Your responsibilities will include: Analyze and design workflows, operation sequences, equipment layouts, and labor utilization to maximize productivity and eliminate inefficiencies. Support cost‑control initiatives by conducting detailed studies and recommending actionable solutions. Create and maintain schedule plans to meet monthly customer delivery targets. Lead cross‑functional continuous‑improvement teams, partnering with Operations, Manufacturing Engineering, Planning, Quality, Safety, Facilities, and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Field Service Engineer (FSE). This position is located in Sabena, Belgium and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency.  What You Will Be Doing: Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. Provide advice in the...

Standard Job Description You will be the Industrial Engineer - Level 2 for the Industrial Engineering Team which is responsible for driving operational excellence across our production and manufacturing facilities.   What You Will Be Doing As the Industrial Engineer - Level 2 you will be responsible for analyzing workflows, enhancing processes, and delivering efficiency improvements that directly boost performance, reduce cost, and increase safety.   Your responsibilities will include: Analyze and design workflows, operation sequences, equipment layouts, and labor utilization to maximize productivity and eliminate inefficiencies. Support cost‑control initiatives by conducting in‑depth studies and recommending actionable solutions. Create and maintain schedule plans to meet monthly customer delivery targets. Lead cross‑functional continuous‑improvement teams, partnering with Operations, Manufacturing Engineering, Planning, Quality, Safety, Facilities, and other...

Standard Job Description Lockheed Martin is looking for a senior propulsion subject‑matter expert to provide on‑site technical support for the C‑130J fleet. The incumbent will act as the primary liaison for all propulsion‑related maintenance, inspection, logistics, and operational matters, ensuring safe and optimal aircraft performance for our Saudi Arabian customer. This posotion is located in Prince Sultan Air Base, Saudi Arabia   What You Will Be Doing Provides a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer.  • Act as the propulsion SME for the C‑130J, diagnosing and resolving engine, nacelle, and accessory issues on‑site. • Review and approve daily...

Description SAIC is seeking a Supply Technician for our customer site in North Charleston, SC. The Supply Technician: Provides expertise and the ability to supervise the LMADIS Materials Management team Provides material purchase status reports to management Work with Purchasing Team to execute common buys across programs and Build long term agreements with key suppliers Work with Manufacturing, Engineering, Quality Assurance, and Purchasing to identify and qualify new suppliers Collaborates with other managers to determine material needs Working with all Program Managers, Engineers, and Program Logisticians to furnish complete Build of Materials (BOMs) to Purchasing for RFQ and procurement requirements Resolve program shortages by reviewing and analyzing all back-orders Periodic calls to vendors to insure promised dates are kept Collecting merchandise from the Shipping and receiving section and safely transporting materials to the receiving area...

Description SAIC is seeking a Quality Assurance Engineering Technician II for our North Charleston, SC customer site. The Quality Assurance Engineering Technician II performs technical support work in a quality-focused environment, with primary responsibility for incoming material receipt inspection, documentation of inspection activities, and creation and maintenance of Non-conformance Reports (NCRs). This position applies a practical knowledge of engineering and quality principles, technical data, and standard procedures to ensure materials and components conform to specifications, drawings, and contract requirements before release for use. The role operates under the general direction of engineers or senior quality staff and requires the ability to work from a variety of technical documents, use standard test and inspection equipment, and produce clear, accurate technical records. Key Responsibilities Material Receipt & Quality Inspection Perform incoming...

Standard Job Description Joining the LM ALIS/MPE team immediately opens a world of educational and experiential development opportunities for you. Tuition Assistance is available for undergraduate and graduate degree programs as well as professional and technical certifications to help you gain the specialized skills for personal and professional growth. Professionally, administrators develop the skills needed at our many domestic US and expanding number of International locations. For the adventurous, occasional temporary travel opportunities may arise to provide support at other locations and aboard ships deploying with the system. With experience, leadership opportunities become available as squadron leads, technical experts, and functional personnel leaders. This role is for an experienced Mission Planning Environment Administrator providing Joint Strike Fighter (JSF) Autonomic Logistics Information System (ALIS) support at Komatsu air base in Japan. The Mission Planning...

Standard Job Description What You Will Be Doing This position will be the Structures Lead for the F35 Wing Systems Manufacturing Engineering Team. This manufacturing engineering lead position will directly support the Wing System production build teams and will require direct coordination with Production, Engineering, Quality, IE, OE and Planning. The candidate should be a subject matter expert in manufacturing engineering and will be responsible for projects for production support, SRR reduction, HPU reduction initiatives, tooling improvements, engineering change management, and mentoring early career team members. Candidate must be able to manage complex technical issues and drive to resolution. All Wing manufacturing engineers are responsible for: • Maintaining/ improving our Standard Operating Procedures and Manufacturing Plans. • Driving our corrective action business rhythms. • Coordinating with other support teams for improvements and affordability initiatives. •...

Standard Job Description You will be a member of the Greenville Production Planning organization in support of the F-16 production line.  The Production Planning department is responsible for writing and maintaining work instructions, controlling configuration management, and incorporating engineering changes for F-16 production.   What You Will Be Doing   The Production Planner Sr will be responsible for the job functions and roles listed below: • Maintains the planning of various manufacturing processes including fabrication, assembly, and installation relating to a specific build area. • Incorporates work instruction change requests into master planning. • Creates work instructions for unscheduled production tasks (QARs, GPRs). • Provides customer support and works closely with cross-functional groups.. What’s In It For You: 3 day weekends every weekend!    ~ Candidate must be willing to work 4x10A Monday-Thursday 2nd Shift ~ From onsite to remote, we...

Standard Job Description You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools.  What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. Proficient in AI prompting as it applies to this position and practice     What’s In It For You: 3 day weekends...