13 customer support associate jobs found

Description SAIC is seeking a Quality Assurance Engineering Technician II for our North Charleston, SC customer site. The Quality Assurance Engineering Technician II performs technical support work in a quality-focused environment, with primary responsibility for incoming material receipt inspection, documentation of inspection activities, and creation and maintenance of Non-conformance Reports (NCRs). This position applies a practical knowledge of engineering and quality principles, technical data, and standard procedures to ensure materials and components conform to specifications, drawings, and contract requirements before release for use. The role operates under the general direction of engineers or senior quality staff and requires the ability to work from a variety of technical documents, use standard test and inspection equipment, and produce clear, accurate technical records. Key Responsibilities Material Receipt & Quality Inspection Perform incoming...

Standard Job Description The 2nd Shift Multi-Functional Manufacturing Associate Manager position is located in Greenville, South Carolina and assists in managing more than one functional area of manufacturing. Final Assembly and Check Out (FACO) is the final production area and is responsible to complete the manufacturing of the Block 70 F-16 and making a fully functioning aircraft with operational systems. FACO delivers aircraft to the paint operations and/or flight operations teams. Together these three teams make up the three parts of the Final Assembly And Flight Operations (FAAFO) Team. Additional responsibilities include: *Assist in management of financial control plans/targets, schedules, EVMS to baseline and metric standards as well as direct and indirect overhead budget. *Advise, staff and assist in managing technical proficiency levels to ensure a trained, qualified, skilled workforce. *Instill quality, product disciplines and stringent adherence to the...

Standard Job Description Lockheed Martin Aeronautics Field Sustainment is seeking an Aircraft Maintenance Associate Manager to lead and manage the Interim Contractor Support (ICS) maintenance team supporting F‑35 operations at Ghedi Air Base, Italy. This position provides direct leadership, establishes maintenance priorities, and serves as the primary interface with Italian Air Force squadron leadership regarding F‑35 maintenance requirements and production matters.   What You Will Be Doing: The Aircraft Maintenance Associate Manager directs the ICS maintenance team in alignment with daily maintenance objectives, integrates closely with Italian Air Force leadership, and advises on maintenance priorities and operational impacts. The role oversees all ICS activities, including over‑the‑shoulder support, On‑the‑Job Training, and Lockheed Martin touch‑labor efforts in support of the customer’s maintenance organization. Responsibilities include managing personnel actions...

Description SAIC is seeking a self-motivated and efficient Drafter / CAD Operator III for our CANES team in North Charleston, SC. The Drafter / CAD Operator will be responsible for providing design and drafting support to complete assembly models and drawings. The Drafter / CAD Operator will be an integral part of the team creating/updating Technical Data Packages (TDPs); being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer(s), to meet the customer demands. Experience with AutoCAD, Solidworks, and Adobe Pro is required. Qualifications Required Experience and Clearance: High school education or equivalent (GED) and four (4) years related experience; OR Associates degree in related discipline and two (2) years related experience. Two (2) years minimum...

Description SAIC is seeking a Flyout Field Service Engineer (FSE) to support the Medusa Sustainment Team, the U.S. Air Force's solution for defense against small unmanned aerial systems (s UAS). Medusa is a government owned Command and Control (Medusa C2) System of Systems integrating sensors, electronic/kinetic effectors, and advanced algorithms to provide tailorable C sUAS capability for fixed base, portable, mounted, and handheld operations worldwide. This role is focused on Tier 2/3 and flyout support to Medusa C2 sites. The FSE will provide on-site technical assistance, corrective maintenance, system integration, and training to operational units, and will work on site in Huntsville, AL when not deployed. Key Responsibilities: When not traveling, the FSE will work on-site in Huntsville, AL, with responsibilities including, but not limited to: Provide field engineering and technical support to maintain and sustain fielded C sUAS systems, equipment, and software at...

Standard Job Description Develops, administers and audits security programs for compliance with government regulations associated with the protection of classified material and export controlled data. Develops and executes security programs associated with the protection of proprietary information in compliance with corporate policies. Performs in individual and team roles supporting all contractual security requirements for Special Access Programs (SAP), Sensitive Compartmented Information (SCI) programs or DOD collateral classified programs. Serves as a Contractor Program Security Officer (CPSO), a Contractor Special Security Officer (CSSO) or a Security Representative. Studies and implements federal security regulations that apply to company compliance and contract execution as set forth in SAP security rules, SCI security rules or DOD security rules (NISPOM and ICD 705). Works closely with U. S. Government customers to seek contract execution approvals and seeks security...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description What You Will Be Doing This position will be the Structures Lead for the F35 Wing Systems Manufacturing Engineering Team. This manufacturing engineering lead position will directly support the Wing System production build teams and will require direct coordination with Production, Engineering, Quality, IE, OE and Planning. The candidate should be a subject matter expert in manufacturing engineering and will be responsible for projects for production support, SRR reduction, HPU reduction initiatives, tooling improvements, engineering change management, and mentoring early career team members. Candidate must be able to manage complex technical issues and drive to resolution. All Wing manufacturing engineers are responsible for: • Maintaining/ improving our Standard Operating Procedures and Manufacturing Plans. • Driving our corrective action business rhythms. • Coordinating with other support teams for improvements and affordability initiatives. •...

Standard Job Description Lockheed Martin Aeronautics. Be More Than You Can Imagine. This role is for an experienced Mission Planning Environment (MPE) Administrator providing Joint Strike Fighter (JSF) Autonomic Logistics Information System (ALIS) support at JASDF Nyutabaru Air Base, Japan. The MPE Administrator directly supports JSF operations by assuring the integrity and availability of the applications and servers on the system. The successful candidate will be the main interface between the MPE system and the Pilots and maintainers supporting the F-35. This is an operational support role to an active fighter unit, so the selected candidate may be required to work at deployed CONUS/OCONUS locations, support rotating shifts, and work over 40 hours per week—which may include weekends—as dictated by mission requirements. The successful candidate will be required to train both JASDF administrators as well as help maintain multiple JASDF ALIS servers.  In this role you...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Field Service Engineer (FSE). This position is located in Sabena, Belgium and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency.  What You Will Be Doing: Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. Provide advice in the...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment Team. Our customers include both the U.S. Military and international governments and organizations. Our global reach and technical depth offer an endless amount of opportunities for up-and-coming Autonomic Logistics Information Systems (ALIS) or Mission Planning Environment (MPE) professionals seeking a place to make their mark – or for seasoned Autonomic Logistics Information Systems (ALIS) or Mission Planning Environment (MPE) professionals seeking their next career challenge. ALIS/MPE Administrators directly support JSF operations by assisting the customer meets their daily flight schedules and will serve as the point of contact in customer discussions during the flight and evaluation activities while maintaining system functionality. The candidate must be able to obtain and maintain Special Access Program clearance required for program access. This is an expat position located in Ghedi Air...

Description SAIC is seeking a detail-oriented Quality Control Inspector to ensure that all products and services meet quality standards and customer requirements. This role plays a critical part in maintaining compliance with quality assurance and quality control processes, specifically focusing on the inspection of fabricated metal components, cable assemblies, and hardware. The ideal candidate will have strong experience in interpreting engineering drawings, understanding specifications, and performing hands-on inspections to ensure precise adherence to contract and product standards. Responsibilities Perform thorough inspections of fabricated metal components, cable assemblies, and hardware to ensure compliance with engineering drawings, specifications, and contract requirements. Read and interpret engineering drawings, technical work instructions, and specifications to verify product conformity. Conduct First Article Inspections (FAI) and ensure compliance...