239 level 3 jobs found

Description: You will be the Systems Engineer (Radar/EW) – Level 3 for the Radar/EW Systems Engineering team which is responsible for delivering advanced RF engineering solutions across the full aircraft lifecycle. What You Will Be Doing As the Systems Engineer (Radar/EW) – Level 3 you will be responsible for applying RF engineering expertise to design, develop, integrate, produce, and sustain cutting‑edge radar and electronic‑warfare systems. Your responsibilities will include: Performing RF analysis, modeling, and testing to support system design and performance verification. Integrating radar/EW subsystems into aircraft platforms using Model‑Based Systems Engineering (MBSE) practices. Collaborating with cross‑functional teams to transition designs from development through production and sustainment. Applying digital engineering tools to create and maintain accurate system models and documentation. Ensuring compliance with security and...

Description: You will be the Maintenance Supervisor - Level 3 for the Facilities Maintenance team which is responsible for... What You Will Be Doing As the Maintenance Supervisor - Level 3 you will be responsible for planning, scheduling, and executing all facility‑maintenance actions, providing technical oversight for both preventive maintenance and emergent repairs. Your responsibilities will include: Lead day‑to‑day maintenance and repair teams for infrastructure, production machinery, and equipment. Manage contractor performance and ensure timely response to emergency service requests. Develop and execute preventive‑maintenance plans that support manufacturing operations and infrastructure reliability. Ensure all personnel and contractors comply with company policies, OSHA, AQMD, fire‑alarm, NEC, and NEMA regulations. Maintain safety, quality, and job‑performance standards for the facilities‑maintenance workforce. What’s In It For You...

Description: You will be the Aircraft Electrical Engineer- Level 3 for the Electrical Power Systems (EPS) team which is responsible for designing and delivering advanced aircraft electrical power solutions. What You Will Be Doing As the Aircraft Electrical Engineer- Level 3 you will be responsible for researching, developing, and defining Electrical Power System (EPS) architecture, requirements, and analysis in coordination with system engineering and other specialty disciplines. Your responsibilities will include: Develop EPS architecture schematics, state diagrams, and verification plans that meet airworthiness, survivability, and functional requirements. Perform electrical load analysis, power quality evaluation, and coordination studies for generators, converters, batteries, and distribution circuitry. Create and maintain technical documentation, standards, and training material for CAD, harness, and wiring design. Manage supplier interactions,...

Description: You will be the Multi Func Manufacturing Supervisor - Level 3 for the Manufacturing Operations team which is responsible for delivering high‑performance aircraft manufacturing in Palmdale, CA. What You Will Be Doing As the Multi Func Manufacturing Supervisor - Level 3 you will be responsible for providing strategic leadership across three shifts in a high‑paced manufacturing environment. "Your responsibilities will include:" Lead and direct a represented workforce, ensuring safety, quality, and cost‑efficiency standards are met. Identify and resolve production constraints, implementing strategies to mitigate bottlenecks. Drive process‑improvement initiatives that enhance efficiency, reduce waste, and improve product quality. Coach, mentor, and develop employees to build a high‑performing, accountable team. Collaborate with engineering, quality, and supply‑chain partners to solve production challenges and boost operational...

Description: Protecting what matters most is the mission that matters most. As we journey through a new era of space, Lockheed Martin Space is a pioneer, partner, innovator and builder. Our amazing team is on a mission to make a difference in the world. Every day, our 115,000 employees come to work with one focus – our customers’ hardest missions. Those that demand extraordinary amounts of courage, resilience, and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. We provide the resources, support, and the focus. You bring the passion and courage to envision limitless possibilities and we’ll tackle those missions with you and stay ahead of ready. Going to space is just the beginning. It’s what you do when you get there that matters. We build satellites and spacecraft that do amazing things in space for our government and commercial customers. Connecting people, advancing...

Description: You will be the Maintenance Supervisor - Level 3 for the Facilities Maintenance team which is responsible for... What You Will Be Doing As the Maintenance Supervisor - Level 3 you will be responsible for planning, scheduling, and executing all facility‑maintenance actions, providing technical oversight for both preventive maintenance and emergent repairs. Your responsibilities will include: Lead day‑to‑day maintenance and repair teams for infrastructure, production machinery, and equipment. Manage contractor performance and ensure timely response to emergency service requests. Develop and execute preventive‑maintenance plans that support manufacturing operations and infrastructure reliability. Ensure all personnel and contractors comply with company policies, OSHA, AQMD, fire‑alarm, NEC, and NEMA regulations. Maintain safety, quality, and job‑performance standards for the facilities‑maintenance workforce. What’s In It For You...

Description: You will be the Sr. Skunk Works Subsystem Design Engineer for the Advanced Development Programs (Skunk Works®) which is responsible for pioneering aerospace subsystem innovations. What You Will Be Doing As the Sr. Skunk Works Subsystem Design Engineer you will be responsible for delivering high‑performance subsystem solutions that enable next‑generation aircraft. Your responsibilities will include: Develop, test, and validate new and modified subsystem designs Troubleshoot system malfunctions to determine root cause and corrective action Create and maintain 3‑D CATIA models, assemblies, installations, and associated documentation Coordinate with suppliers, integrated product teams, management, and customers Support manufacturing, ground/flight test, and customer operating locations What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn...

Description: The Skunk Works (Lockheed Martin Advanced Development Program) is looking for world class talent in Project Engineering to be a part of a team that will carry on our 80 year tradition making history in advanced aircraft development. The ADP Skunkworks Vehicle Management team writes software for a wide range of aircraft subsystems that make the airplane fly. We are a highly imaginative and productive team working on a new development project to create modular and reusable software to create not only our current project but an entire future portfolio. We operate out of the Skunkworks headquarters in Palmdale, CA in a fully onsite and hands on team. Basic Qualifications: • Bachelor's degree from an accredited college in a STEM field or equivalent relevant experience. • Experience coordinating across multiple functions or engineering teams • Demonstrated organizational and communication skills ***Must be a US Citizen. As the ability to obtain a clearance is required***...

Description: We are Lockheed Martin Aeronautics! Potential Sign on Bonus included for external candidates! As a part of the Systems Engineering Integration and Test Team (SEIT), you will immediately impact the business with your ingenuity, creativity, and ideas that will be the catalyst for future business and support the continued success of Lockheed’s current platforms including the F-35, F-22, F-16, C-130, and SkunkWorks. If you are craving an opportunity where you are invited to be passionate, push the envelope, and think outside of the box, this opportunity with the Systems Engineering Integration and Test Team (SEIT) may be right for you! By applying to the position listed on this site, you will be considered for Software Engineering opportunities within Lockheed Martin Aeronautics Corporation including but not limited to: Systems Engineering, Military Operations Analysis, Simulation & Systems Labs, and Test & Evaluation YOUR IMPACT The...

Description: As a part of the Systems Engineering Integration and Test (SEIT) team, you will immediately impact the business with your ingenuity, creativity, and ideas that will be the catalyst for future business and support the continued success of Lockheed’s current platforms including the F-35, F-22, F-16, C-130, and SkunkWorks. If you are craving an opportunity where you are invited to be passionate, push the envelope, and think outside of the box, this opportunity with the Systems Engineering Integration and Test (SEIT) team may be right for you! By applying to the position listed on this site, you will be considered for Aeronautical Engineering opportunities within Lockheed Martin Aeronautics Corporation including but not limited to: Systems Engineering, Military Operations Analysis, Simulation & Systems Labs, and Test & Evaluation What’s In It For You Our employees play an active role in strengthening the quality of life where we live and...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team at Beale AFB California, As a U-2 Aircraft Modification Technical Lead. You will be responsible for providing critical planning and execution of U-2 Depot-level modifications and Time Compliance Technical Orders (TCTO). What You Will Be Doing -Serve as intermediary between the technicians, CFT Site Lead, and customer while assisting technicians with day-to-day activities. -(This is a working Technical Lead Position) Applicants will be skilled in aircraft electrical systems, aircraft wiring maintenance and or Structural maintenance build up for MOD Aircraft. -Complete jobs in maintenance data collection systems, adhere to all technical orders, fault isolation manuals, ground operating procedures and local operational instructions. -Perform troubleshooting on systems and components on the aircraft as required. -Responsible to support all maintenance performed on the assigned aircraft....

Description: ●Candidate will coordinate production activity to represented personnel for daily assignments and routinely follow up as necessary to drive quality inspections. ● Candidate will work with planning & Floor QA to identify inspection points for potential reduction, and optimization. ● Candidate will conduct analysis of inspection pass rates and adjust oversight levels based on acceptance rates. ● Candidate will review existing inspection requirements and inspection acceptance rates for assembly and fabrication to assist in developing inspection policies. ● Must be able to obtain a Secret Clearance This position is in Palmdale, CA à Discover Palmdale. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with...

Description: We are Lockheed Martin Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. The Flight Test Project Engineer reports to Palmdale ADP Flight Test management and serves as the central liaison for all flight‑test logistics, overseeing supply‑chain and procurement coordination, maintaining accurate inventory, and ensuring timely acquisition of hardware and consumables. This role manages preventive‑maintenance and calibration of flight‑test facilities, equipment, and ground‑support assets, while...

Description: The Systems Safety Engineer is responsible for ensuring that the products developed at Lockheed Martin Skunkworks and sold to the customer are safe for use. The primary job responsibility will be that of performing Hazard Analysis (Preliminary Hazard Analysis (PHA), System Hazard Analysis (SHA), Subsystem Hazard Analysis (SSHA), Functional Hazard Analysis, Basic Fault Tree Analysis and develop System Safety Program Plan (SSPP)) per MIL-STD-882, FAA Systems Safety Handbook and contract requirements. Basic Qualifications: • Bachelors degree or above in an Engineering discipline or Aviation. • Experience conducting System Safety analyses, in compliance with MIL-STD-882 or equivalent. Desired Skills: Have a solid technical background Experience supporting System Safety Working Groups (SSWG) Experience in analytical analysis Experience presenting in front of large groups Experience in performing safety and hazard analyses Good oral and written communicator...

Description: You will be the Sr. Skunk Works Subsystem Design Engineer for the Advanced Development Programs (Skunk Works®) which is responsible for advancing aerospace subsystem innovation. What You Will Be Doing As the Sr. Skunk Works Subsystem Design Engineer you will be responsible for leading the design, development, and validation of aircraft subsystems while collaborating across multidisciplinary teams. "Your responsibilities will include:" Develop, test, and validate new and modified subsystem designs. Troubleshoot system malfunctions to determine root cause and corrective action. Create and maintain 3‑D CATIA models, assemblies, installations, system requirements, and interface drawings. Generate system requirements, conduct trade studies, and draft sub‑component and flight test plans. Coordinate with suppliers, integrated product teams, management, and the customer. What’s In It For You We are committed to supporting your...

Description: This position is for a Software Quality Engineer (SWQE) within the historic Lockheed Martin Skunk Works Organization. The one and only Skunk Works has a 75-year track record developing aircraft systems that push the boundaries of what’s possible. Trusted to solve critical national needs for our warfighters, the Skunk Works never shies away from seemingly unsolvable challenges and has a reputation for solving hard problems quickly, quietly, and at the highest quality. At Skunk Works, every line of code is a building block of national security and pioneering aerospace technology. Our Software Quality Engineering team is the trusted guardian of that code – ensuring that the complex software driving next generation systems meets the highest standards of safety, reliability, and cyber resilience. By joining this elite group, you’ll help shape the processes that turn groundbreaking ideas into mission critical reality, protecting both the integrity of the program and the...

Description: We are Lockheed Martin You will be the Ground Station Flight Engineer. The Flight Engineer team is responsible for ground station maintenance and operation of flight simulators. As a crew member, you will actively participate in test events and assist other crew members with accomplishing test requirements. You will assist with troubleshooting, fault isolation, diagnostics, and fault resolution. What You Will Be Doing As the Ground Station Flight Engineer, you will be a Specialized System Engineer that acts as a system expert. You will perform computer administration functions to include software installations and upgrades, user account and hardware maintenance. As a ground station Flight Engineer, you will be an integral crew member responsible for pre & post flight operations. Your responsibilities will include: • Perform real-time troubleshooting of complex hardware/software anomalies with analysis and evaluation of asset under test. • Execute...

Description: What You Will Be Doing This is a Technical Subcontract Management (TSM) field support position. The TSM will be responsible for providing onsite support at various airframe and major system suppliers in/around the Los Angeles, CA area. Approximately 90% of the TSMs time will be spent at a Lockheed Martin (LM) supplier facility. A TSM is a member of the Supply Chain Management (SCM) team that LM Aeronautics uses to minimize disruptions to the supply chain by providing “in the field” oversight of supplier execution. Daily activities include: working with supplier personnel to prioritize components through manufacturing, validating the status of the deliverable parts and providing detailed status to LM procurement, preparing plans to reduce/prevent shortages, identifying risks in the supply chain, and developing risk mitigation plans to minimize the potential impact to LM. Candidates should have an understanding of production processes as they relate to machined...

Description: We are Lockheed Martin Flight Test Engineer supporting F-22 aircraft as a Test Conductor and Test Director within the F-22 CTF, Edwards AFB, CA. Position will work with military, contractor, and civil service personnel as members of the flight test team. · Duties and responsibilities include planning, scheduling, and executing flight test mission requirements by: · Developing and publishing test plans and flight test cards. · Determining and communicating aircraft test requirements and configuration to responsible engineering, maintenance, instrumentation, and flight operations personnel to ensure aircraft readiness. · Complying with published test safety plans and standard operating procedures. · Conducting test missions and performing test mission briefings and debriefings, and after meeting qualification requirements. · Evaluating results from flight activities and incorporating "lessons learned" into future test activities. **Swing shift, overtime, travel and...

Description: We are Lockheed Martin As a part of the Systems Engineering Integration Team (SEIT), you will immediately impact the business with your ingenuity, creativity, and ideas that will be the catalyst for future business and support the continued success of Lockheed’s current platforms including the F-35, F-22, F-16, C-130, and SkunkWorks. If you are craving an opportunity where you are invited to be passionate, push the envelope, and think outside of the box, this opportunity with the Air Vehicle Engineering team may be right for you! By applying to the position listed on this site, you will be considered for Systems Engineering opportunities within Lockheed Martin Aeronautics Corporation including but not limited to: Systems Engineering, Test & Evaluation, and Simulation and Systems Labs (SSL). What’s In It For You Our employees play an active role in strengthening the quality of life where we live and work by volunteering more than 850,000 hours annually. Here...