26 production operations lead jobs found

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: The story of aviation has always been the story of people who have the perseverance to fail, to try again and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission results has been ingrained in our culture. It is that passion combined with a strategic focus on ever changing global opportunities that shapes our path forward. What You Will Be Doing Initiate Pre-Planning Analysis and detailed Engineering or Manufacturing pre-plans to support the procurement, manufacture and installation of F-35 aircraft components. • Responsible for review and acceptance of new or revised Engineering drawings to ensure compatibility with drafting procedures and producibility of part requirements in accordance with established manufacturing procedures. • Provide technical assistance to hourly Tool Planners involved in analyzing Engineering requirements and development/initiation...

Description: You will be the C-130 Final Assembly Manager - Level 5 for the Final Assembly, Trim, Engine Shop and Component Paint team which is responsible for delivering high‑quality C130J aircraft. What You Will Be Doing As the C-130 Final Assembly Manager - Level 5 you will be responsible for leading culture, safety, FOD, quality, cost and schedule obligations for a 130‑person team on the C130J program. Your responsibilities will include: Drive a safety‑first culture and enforce FOD‑control standards. Ensure product quality meets stringent aerospace requirements. Manage cost performance and drive continuous improvement. Maintain schedule fidelity and mitigate delivery risks. Mentor and develop both salaried staff and artisans/mechanics. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits...

Description: Our team is responsible for work measurement, cost analysis, capacity requirements planning (reporting and analysis), capital project management and budget planning, discrete event simulation, staffing forecasts, etc. As an Industrial Engineer, you will support cross-functional improvement efforts for ADP programs, working closely with various teams to identify areas for improvement and implement changes. You will also perform data analysis, observations, and time studies to support cost driver analysis and process improvement. Your responsibilities will include: -First Article Master Scheduling Committee (FAMSCO) facilitation - Work directly with and in support of the production operations team -Performing observations and time studies to support cost driver analysis and process improvement -Using visualization and data analytic tools to analyze production processes -Applying Lean and Six-Sigma practices to production and leading major improvement efforts...

Description: Our team is responsible for work measurement, cost analysis, capacity requirements planning (reporting and analysis), capital project management and budget planning, discrete event simulation, staffing forecasts, etc. As an Industrial Engineer, you will support cross-functional improvement efforts for ADP programs, working closely with various teams to identify areas for improvement and implement changes. You will also perform data analysis, observations, and time studies to support cost driver analysis and process improvement. Your responsibilities will include: -First Article Master Scheduling Committee (FAMSCO) facilitation - Work directly with and in support of the production operations team -Performing observations and time studies to support cost driver analysis and process improvement -Using visualization and data analytic tools to analyze production processes -Applying Lean and Six-Sigma practices to production and leading major improvement efforts...

Description: We are looking for a skilled Industrial Engineer Senior to join our team, supporting the Marietta Fabrication department in an analytics role. This role is key in optimizing production processes by monitoring metrics to drive continuous improvement, supporting our production customers, and maintaining operational excellence. The individual will help the Production Operations team manage production activities through the use of a variety of industrial engineering and EVMS approaches. Will work closely with Industrial Engineering, Production Management, and a variety of Production support functions. This role will work to meet production plans and schedules, create and monitor production health metrics, and maintain work/time standards. What You Will Be Doing • Enhance production activities by implementing analytical techniques and utilizing various data and data visualization tools. • Improve, automate, and sustain Industrial Engineering processes. • Monitor...

Description: You will be the Type Version Integrator - Ship Captain - Level 5 for the Production Operations team which is responsible for integrating new aircraft configurations and engineering changes into manufacturing. What You Will Be Doing As the Type Version Integrator - Ship Captain - Level 5 you will be responsible for leading production readiness and cross‑functional integration of new aircraft versions from design release through first‑article and recurring production. Your responsibilities will include: Serve as the primary Production Operations representative supporting assigned aircraft programs and configuration changes. Lead integration of new Type Version Effectivity (TVE) changes into fabrication and production while minimizing operational disruption. Drive production readiness activities from engineering release through first‑article production and transition to recurring manufacturing. Lead cross‑functional planning and execution...

Description: You will be the Assembly Worker Structures Sr - C130 for the team which is responsible for laying out and locating structural components or assemblies in making production assemblies as specified by design changes. What You Will Be Doing As the Assembly Worker Structures Sr - C130, you will be responsible for performing difficult structural pick-up and/or rework such as removing, replacing, or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies. Your responsibilities will include: Working structural changes which materially alter previous assembly references and practice Performing trimming, reforming, and altering parts and structures as required Fabricating detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners, and patches Performing portable milling operations on wing and center section attaching joints Improvising shop aids to facilitate assembly and installation as...

Description: This role will drive initiatives to improve production operations, streamline processes, and foster a culture of continuous improvement to align with long-term business strategies. Enhancing producibility, product quality, and process optimization across various engineering disciplines, including failure analysis, industrial, manufacturing, process improvement, quality assurance, reliability, supplier quality, Lean Six Sigma, and tooling. This position is in Marietta, GA à Discover Marietta. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and...

Description: What You Will Be Doing: Provide Air Mobility & Maritime Missions (AMMM) Modifications, Upgrades, & Overhauls (MUO) Team support at Marietta, GA. Candidate must be willing and able to travel for business and extended periods to execute Sustainment Operations activities at other domestics and international customer sites. This AMMM aircraft (C-5, C-130, P-3) Contract Field Team (CFT) Lead position will be a direct interface with various customers within the United States Government (USG) Acquisition, Sustainment, & Logistics Management Organizations to include USAF, USCG, USMC, and multiple Foreign Military Sales (FMS) including direct commercial sales of foreign customers. Primary job duties include: • Coordination of all logistics, repair, and modifications required to support MUO-coordinated requirements worldwide. • Travel Required Specific tasks include planning, coordination, and Trial Kit Installations (TKI) oversight execution of mods and...

Description: You will be the Distribution Center Site Lead for the Distribution Center Operations Team. Our team is responsible for managing inbound, decant, put‑away, picking, internal transportation, shipping, and cross‑functional support functions such as Maintenance, Quality, and Safety. What You Will Be Doing As the Distribution Center Site Lead you will be responsible for leading a distribution center that directly supports three manufacturing facilities (two in Florida and one in Alabama). You will ensure seamless material flow, uphold safety standards, and drive continuous improvement while working remotely through 2026 with travel involved and transitioning onsite in early 2027. Your responsibilities will include, but are not limited to: Manage inbound, decant, put‑away, picking, internal transportation, and shipping operations. Oversee cross‑functional Maintenance, Quality, and Safety support. Serve as the HR escalation point and ensure critical...

Description: We are Lockheed Martin You will be a C-130J Production/Training Pilot for the C-130 Flight Operations team. Our team is responsible for conducting acceptance check flights of newly assembled C-130J aircraft. We are where the “Rubber meets the Road” for all new C-130J aircraft and capabilities coming out of our Marietta plant. What You Will Be Doing As the Production/Training Pilot your responsibilities will include: • Pilot C-130J aircraft during production acceptance and functional check flights • Pilot C-130J aircraft on delivery and ferry flights • Pilot C-130J aircraft for engineering and experimental test flights to validate and verify compliance with FARs and military specifications, determine operational suitability, and conduct developmental test • Perform as a C-130J instructor pilot for company and customer pilots and aircrew during syllabus training flights • Provide classroom, simulator, and flight instruction for company and customer aircrew •...

Description: You will be the Flight Line Supervisor - Level 3 for the Flight Line Operations team which is responsible for leading represented mechanics and avionics technicians in systems testing, ground checks, and flight operations. What You Will Be Doing As the Flight Line Supervisor - Level 3 you will be responsible for overseeing crew performance, maintaining safety standards, and ensuring on‑time, high‑quality flight‑line execution. Your responsibilities will include: Supervise crews of mechanics and avionics technicians, assigning work to meet tactical and strategic goals. Ensure tasks are completed on schedule and within budget while reviewing work for quality and efficiency. Maintain a clean, organized work area and enforce “Clean As You Go” tool‑control practices. Conduct safety audits, identify risks, and implement mitigating actions in partnership with Flight Line Operations leadership. Manage training records, address certification...

Description: You will be the Test Engineer Staff for the AMMM Functional Test Engineering Team in Marietta, GA, which is responsible for supporting multiple areas within manufacturing operations. What You Will Be Doing As the Test Engineer Staff, you will be responsible for designing, developing, operating, maintaining, and documenting software and firmware components and computing systems software to meet engineering and manufacturing requirements. Your responsibilities will include: Writing and revising C-130J aircraft system/component test procedures and providing on-aircraft testing and troubleshooting support. Developing test equipment and providing test equipment designs, as well as supporting Test Labs and Component testing within the Labs. Creating Labview, C++, & Visual Basic test programs for analyzing & validating the 1553 data bus systems. Developing and maintaining production planning (SFM, CAPPS, IMPACTS) and providing Functional...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: You will be the Sr. Operations Technician - Level 3 for the Flight Line Operations team which is responsible for interpreting engine‑run and flight‑debrief data, leading maintenance crews, and maintaining fault‑tracking systems. What You Will Be Doing As the Sr. Operations Technician - Level 3 you will be responsible for providing technical support to flight‑line personnel, ensuring accurate data capture, and maintaining safe, efficient operations. Your responsibilities will include: Interpret engine‑run and flight‑debrief information and enter data into the tracking/troubleshooting database. Lead a maintenance crew of 10+ represented employees, coordinating daily tasks and safety compliance. Research and provide blueprints and technical documentation to flight‑line technicians. Identify, track, and report fault anomalies, supporting root‑cause analysis and corrective actions. Serve as flight‑line supervisor when required, including...

Description: You will be the Flight Line Supervisor - Level 3 for the Flight Line Operations team which is responsible for supervising crews that conduct systems testing, ground checks, and flight operations. What You Will Be Doing As the Flight Line Supervisor - Level 3 you will be responsible for leading represented mechanics and avionics technicians, coordinating work assignments, and ensuring safe, on‑time execution of flight‑line activities. Your responsibilities will include: Supervise crews of represented mechanics and avionics technicians for systems testing, operational ground checks, and flight missions. Assign and adjust work tasks to meet tactical and strategic goals while staying on schedule and within budget. Ensure compliance with safety, ESH, and quality standards through audits, risk mitigation, and policy administration. Maintain a clean, organized work area with “Clean As You Go” practices and proper tool control. Drive...

Description: You will be the Tool Engineering Lifecycle Lead - Level 4 for the Tool Engineering team which is responsible for guiding tool‑engineering activities that support AMMM production operations. What You Will Be Doing As the Tool Engineering Lifecycle Lead - Level 4 you will be responsible for providing guidance, development and mentorship to Tool Engineers delivering floor, vendor and feeder‑plant support for AMMM production. Your responsibilities will include: Provide guidance and development for Tool Engineers delivering floor, vendor and feeder‑plant support for AMMM production operations. Work closely with Production to develop new tools, repair existing tools, perform root‑cause analysis and implement corrective actions that improve quality and productivity. Serve as functional lead, mentor and trainer to current and newly hired tooling engineers. Create and update tool designs; develop and refine tooling processes and procedures....

Description: You will be the Propulsion Integration Engineer for the propulsion sustainment team which is responsible for... What You Will Be Doing As the Propulsion Integration Engineer you will be responsible for providing engineering support to keep C‑130 propulsion systems operating reliably in sustainment, flight‑line, and production environments. Your responsibilities will include: Analyze flight data to identify root‑cause issues and develop corrective actions (RCCA). Collaborate with suppliers and customers to resolve production and fleet‑related propulsion problems. Develop Basis of Estimates and Statement of Works for engineering proposal efforts. Support flight‑line operations and production‑line activities to ensure continuous system availability. Document technical findings and communicate recommendations to program leadership. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being,...

Description: You will be the Propulsion Integration Engineer for the propulsion sustainment team which is responsible for... What You Will Be Doing As the Propulsion Integration Engineer you will be responsible for providing engineering support to keep C‑130 propulsion systems operating reliably in sustainment, flight‑line, and production environments. Your responsibilities will include: Analyze flight data to identify root‑cause issues and develop corrective actions (RCCA). Collaborate with suppliers and customers to resolve production and fleet‑related propulsion problems. Develop Basis of Estimates and Statement of Works for engineering proposal efforts. Support flight‑line operations and production‑line activities to ensure continuous system availability. Document technical findings and communicate recommendations to program leadership. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being,...