50 rf test technician jobs found

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, precision oscilloscopes, signal generators, RF power amplifiers, power meters, network analyzers/VNAs (PNA/PNA X), spectrum analyzers (phase noise/spur mode), vector signal analyzer, noise figure meters (or built in NF option), phase noise analyzers, data acquisition/test automation hardware (PXI, NI DAQ, USB digitizers), and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including a...

Description: Work with a production team to perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems in a cleanroom environment at a workbench or workstation, including maintaining accurate documentation of test data and setup/maintenance of RF test setups. Support RF performance testing through environmental testing like TVAC, thermal, vibe, etc. Basic Qualifications: Proficient with: DC power supplies, digital multimeters, oscilloscopes, signal generators, power meters, network and spectrum analyzers (including multi function PNA/PNA X platforms), data acquisition units and ESD controlled clean room workstations with microscope and precision hand tools. Demonstrated experience: Proficient and experienced with bench level CCA testing, including RF testing and troubleshooting of microwave/electronic subsystems, and with a proven ability to set up, operate, and interpret results from the core suite of RF test equipment....

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Description: This Mid-Level High‑Power Antenna Test Technician is responsible for planning, setting up, and executing high‑power RF antenna tests in compliance with test plans, specifications, and safety standards. The technician operates a suite of RF test instruments (e.g., spectrum analyzers, vector network analyzers, power meters, signal generators, high‑power amplifiers, and RF switches), collects accurate performance data, performs routine equipment maintenance, and works side‑by‑side with engineers to troubleshoot and validate antenna‑system behavior. All test activities are documented in AF test reports, and electronic data‑capture systems while maintaining a clean, safe, and orderly work environment. Littleton, Colorado manufacturing facility. This role is will primarily work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: • Must work a 1st Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 5 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they’re often classified. That’s what you’ll find at General Dynamics Mission Systems. Here you’ll lead amazing engineers as they invent the technologies, products and services that help our service members, intelligence analysts and first responders keep...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. Basic Qualifications: Electronic Circuit Card experience or equivalent technical proficiency. Quality Assurance, instrument/equipment Technician Quality Assurance, Product inspection, mechanical inspection...

Description We are currently seeking a highly skilled and motivated Senior Electronics Technician to provide critical hands-on support for the Expeditionary Electronic Warfare division (MXQ) at NSWC Crane. In this role, you will be instrumental in Counter-Unmanned Aircraft Systems (CUAS) test and evaluation activities involving threat devices, unmanned aircraft systems, RF systems, sensors, test equipment, and supporting field infrastructure. Job Responsibilities: Your primary job responsibilities will include supporting threat device operations such as configuration, inspection, readiness verification, staging, inventory control, operation, recovery, maintenance, and post-test accountability. You will serve as a UAS pilot or support technician for CUAS test events, which involve obtaining and maintaining required UAS pilot certifications, licenses, and customer-required qualifications to operate unmanned target devices, communications devices, and remote support...

Description SAIC is looking for an Engineering Technician V in Bedford, IN to support the U.S. Navy. This position will need someone experienced with tactical communications equipment, who knows e-mail etiquette and can communicate with both CIV and CTR. This position is perfect for someone that is organized and willing to work in small teams and with government oversight. Job duties include but are not limited to: Using hand tools and power tools to assemble according to engineering drawings. Using test equipment to test and analyze power, Ethernet and RF cables. Building and operating tactical communication systems. Leading small teams with delegating tasking, checking work and documenting completed work in work cards, processes, and reporting to program manager. Performing tasks such as integration of system components, modifications to systems, and testing system functionality. Analyzing and implementing procedures and processes for the effectiveness,...

Description: You will be the Technician Calibration Specialist for the Metrology Team. Our team is responsible for delivering precise measurement solutions that support critical mission systems. What You Will Be Doing As the Technician Calibration Specialist you will be responsible for ensuring the accuracy and reliability of a wide range of measuring instruments. Your responsibilities will include, but are not limited to: Calibrate, adjust and maintain electronic, electromechanical, mechanical, and torque measuring/indicating instruments to conform to set standards. Interpret written instructions and apply technical knowledge to perform calibrations. Research and develop calibration methods, procedures, and automated calibration software. Prepare calibration data reports, data sheets, and required documentation. Resolve issues by interfacing with customers, vendors, and management, and monitor quality using statistical process controls....

Description: You will be the Senior Calibration Technician Specialist for the Calibration team. Our team is responsible for calibrating electronic test and measuring equipment to meet exacting standards. What You Will Be Doing As the Senior Calibration Technician Specialist you will be responsible for ensuring all test and measurement instruments are accurate, reliable, and ready for mission‑critical use. Your responsibilities will include, but are not limited to: Calibrate electronic, electromechanical, optical, pneumatic, and pressure‑type measuring instruments according to detailed specifications. Set up and execute calibration sequences, methods, and procedures using blueprints and drawings. Disassemble, clean, repair, and replace defective parts of test equipment such as pressure gauges and tension meters. Sets up calibration sequences, methods and procedures according to detailed specifications, blueprints, drawings, and requirements. May monitor...

Basic Qualifications Associate’s degree in a related field or the equivalent is required. In addition, a minimum of 3 years of directly related experience is required. J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required. CLEARANCE REQUIREMENTS: Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial...

Description SAIC is seeking an Engineering Technician V to support the Special Operations Command Branch and Expeditionary Electronic Warfare Division at NSWC Crane. This position supports field and lab electronic systems and testing for Special Operations Command (SOCOM). As an Engineering Technician V, you will support surge test events, travel as required, and serve as a key technical resource for test equipment and material. You will be working onsite in a fast paced and dynamic environment where teamwork and collaboration are essential. You are required to possess a SECRET clearance and later a TS/SCI. Responsibilities: Maintain inventory of MXQW test equipment and supplies located in Buildings 3330N and 3191 Support test events by transporting, setting up, tearing down, operating, maintaining, and accounting for test equipment Provide technical support during test events, including troubleshooting equipment issues to support RF systems, electronic systems, cables,...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 1 year of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Help make the technologies, products and services that make a difference. That’s the opportunity that’s waiting for you at General Dynamics Mission Systems. We help our nation’s heroes keep our nation safe by creating solutions so advanced, they redefine innovation for the world. It’s an amazing challenge. And it’s waiting for you now. We apply advanced technologies such as Artificial Intelligence, Blockchain,...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - Provide test engineering support to production program integrated product team (IPT’s). - Define test process plans identifying the sequence of required test steps. - Define required tools, instruments, fixtures, software, hardware, interfaces and test chambers required to execute the test process plan. - Develop tests and generate detailed test procedures including narrative, diagrams and photographs. - Generate detailed troubleshooting guides to aid in the troubleshooting and analysis of the root cause of test failures. - Use available test...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - Provide test engineering support to production program integrated product team (IPT’s). - Define test process plans identifying the sequence of required test steps. - Define required tools, instruments, fixtures, software, hardware, interfaces and test chambers required to execute the test process plan. - Develop tests and generate detailed test procedures including narrative, diagrams and photographs. - Generate detailed troubleshooting guides to aid in the troubleshooting and analysis of the root cause of test failures. - Use available test...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 1 st Shift, 3 -12hrs shifts, Friday, Saturday, Sunday 6a-630p." Basic Qualifications: • Must work a 3-12 shift (6:00a to 630p, Friday/Saturday/Sunday) • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and weekends to support key critical...

Description: This Mid-Level Environmental Test Technician role is designed to build on your existing Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Satellite RF Electronic box, antenna, and battery testing using thermal vacuum and vibration test equipment at our Littleton, Colorado manufacturing facility. This role is will primarily work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 Basic Qualifications: Basic Qualifications : • Must work a 2nd Shift, 9x80A-9,9,9,9,8 hrs/d in Wk 1- 9,9,9,9,OFF in wk2 • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations • Able to work occasional holiday and...

Basic Qualifications Associate’s degree in related discipline or equivalent is required plus a minimum of 1 year of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire, but must be obtainable within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Help make the technologies, products and services that make a difference. That’s the opportunity that’s waiting for you at General Dynamics Mission Systems. We help our nation’s heroes keep our nation safe by creating solutions so advanced, they redefine innovation for the world. It’s an amazing challenge. And it’s waiting for you now. We apply advanced...

Description: Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE). Requires sound knowledge of precision measurement methodologies and principles. Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency. Must have an understanding of measurement traceability and be competent interpreting and converting specifications. Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed. Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements. Basic Qualifications: Experience with the use of precision measuring principles, theories and units of...

Description: This Mid-Level Antenna Test Technician role is designed to build on your Mechanical and Test Technician skills and abilities while providing continued development to enhance your skills for future opportunities that may include other more senior team contributor roles and advancement opportunities. In this role, you will support Antenna testing using RF equipment and Anechic Chambers at our Littleton, Colorado manufacturing facility. This role is will primarily work 1st shift, 9-80 schedule (every other Friday off), shift starts at 6a. Basic Qualifications: • High school diploma or equivalent/combined education. • Basic computer skills including experience using Microsoft Excel, Word, and PowerPoint. • Able to work alternate shifts when required to support ongoing business operations-OT is necessary in this position as is the ability to work occasional holiday and weekends to support key critical business operations. • Ability to decipher and follow various...