44 field engineer jobs found

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description You will be the Electrical Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will drive the design, analysis, integration and test of circuit card assemblies (CCAs) and related electrical subsystems. You will work side by side with systems, software, manufacturing and quality partners, providing hands on laboratory support and production assistance to keep programs on schedule, on budget and fully compliant with defense standards. Your responsibilities will include • Design and analyze CCAs, performing schematic capture, PCB layout and integration with system level architectures. • Conduct electrical testing,...

Standard Job Description You will be the Electrical Engineer Senior for the Hardware Engineering team at Lockheed Martin  Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer Senior, you will support the design, development, integration, test, and production of electrical hardware and subsystems for defense programs. Your responsibilities may include: • Serving as the primary technical contact for assigned subsystems or hardware deliverables across development and production phases • Providing technical leadership and guidance to subsystem suppliers, ensuring contract requirements flow accurately and hardware meets specifications • Owning the disposition of hardware through Material Review Board...

Standard Job Description The Work As the Senior Test Software Automation Engineer, you will design and develop automated test station Software used to test RF/Digital/Analog/Power modules, subsystems, and systems. Designs can include automated test programs, as well as sim/stim test systems used in production test solutions. Responsibilities also include: - The design, development and maintenance phases of the project. - Presenting design documentation for customer and team reviews.  - Integration and validation of the test software. - Costing/proposal data generation for new business. Who you are The ideal candidate for this position will have: - Experience developing test automation software in an aerospace environment using LabView, C/C++ and Matlab. - Expertise in automating measurement equipment. -Previous experience with computer operating systems and administration.  What We're Doing Lockheed Martin is shaping the future of defense through cutting edge...

Standard Job Description As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO and Catia layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence, including occasional travel for site visits and field demonstrations • Managing drawing releases, responding to CRs, generating CN's, and presenting/supporting change boards and...

Standard Job Description Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a System Integration and Test Engineer at Lockheed Martin's Chelmsford, MA facility. You will be responsible for supporting the design, development, and testing of complex systems. Our team is dedicated to delivering innovative solutions, and you will play a key role in architecting new test stands, designing test solutions, and developing algorithms and techniques. What You Will Be Doing As a System Integration and Test Engineer, you will be responsible for: • Supporting the design, development, and testing of complex digital,...

Standard Job Description You will be the Tool Design Engineer for the Missiles and Fire Control team in Ocala. Our team is responsible for designing dies, gauges, jigs, fixtures, prototype models, and robotics end-of-arm tooling for production or experimental purposes.   What You Will Be Doing As the Tool Design Engineer, you will be responsible for utilizing 3D modeling software to conceptualize, create, and integrate industrial machinery, equipment, and tools. Your responsibilities will include: Designing dies, gauges, jigs, fixtures, harness boards, prototype models, and robotics end-of-arm tooling for production or experimental purposes. Accounting for various factors such as accessibility, ergonomics, safety, economy, mobility, and performance requirements while developing solutions. Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production...

Standard Job Description We are Lockheed Martin At the Skunk Works, our Computational Electromagnetics (CEM) Codes & Tools team is expanding and playing a pivotal role in our Digital Transformation development roadmap. We are seeking a mid-career CEM software developer to join our team. This role is critical in driving our Digital Transformation (DX) efforts forward through enabling and integrating state-of-the-art CEM and DX tools. This expertise will enable us to design, develop, and optimize cutting-edge systems and technologies, giving us a competitive edge in the industry. This role will fill a capability vacancy and provide critical help in:   (1) CEM algorithm research and development; (2) implementation, maturation, and integration of CEM algorithms in established code bases; (3) testing and benchmarking of new code components and algorithms; (4) software documentation and training; (5) deploying, tuning, and performance optimization of complex software to...

Standard Job Description The HWIL Software Integration Engineer (E4) provides senior level technical leadership for the development, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) simulations that combine missile hardware components with high performance software models. With 5 + years of relevant experience, the incumbent operates with technical authority, defines integration strategy, and influences program decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities: • Software Architecture & Strategy - Define and evolve the software architecture for HWIL test beds, establishing standards for real time code, low latency data pathways, and deterministic execution. • Lead the development and integration of missile flight software, guidance algorithms, and sensor models into closed loop simulation environments (including 6 DOF missile dynamics). • Real Time Integration &...

Standard Job Description What We're Doing At Lockheed Martin, we are dedicated to pushing the boundaries of innovation and technology. Our mission systems drive advancements in defense, aerospace, and technology, helping to shape a secure and sustainable future. We pride ourselves on creating cutting-edge products that solve the world's toughest challenges, and we’re looking for passionate engineers to help us deliver solutions that matter. The Work Lockheed Martin is seeking an FPGA Designer to join our Mission Systems team. In this role, you will play a key part in the development of Advanced Processing systems and subsystems, supporting all aspects of hardware development from requirements derivation through product integration. You’ll support efforts to ensure the technical integrity, quality, and completeness of work, ensuring that project deliverables meet cost and schedule commitments. Key responsibilities include: Supporting overall organizational process...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development. Determines architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.   What We're Doing At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within our capacity – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, education, and background! The Work As an FPGA Engineer you will;  • Perform complex FPGA firmware architecture and/or custom digital board designs. • Design digital signal processing,...

Standard Job Description Who We Are Lockheed Martin is dedicated to shaping, developing, & advancing technologies & capabilities with a focus on our customers’ needs as part of our 21st Century Security vision. We foster collaborative innovation, provide opportunities for career development, & empower our employees with the skills needed to create cutting-edge products & solutions that keep our users Ahead of Ready. The role is based out of King of Prussia, PA and reports to our Converged Sensors organization. What We’re Doing As part of our 21st Century Security vision, Lockheed Martin is investing in advancing multi-mission sensing capabilities. Our Converged Sensors team is accelerating multi-mission aperture & multi-mission processing technologies through research, development, & demonstrations. Who You Are Our team is seeking a staff systems engineer to help design, develop, & deliver software defined Electronic Warfare (EW)...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. We are seeking an expert RF PCB Designer to lead the development of high speed, high...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. What You Will Be Doing Lockheed Martin is seeking an RF Engineer, for the planning and completion of the product baseline development, integration, and verification efforts, as well as the planning and execution of current and future changes. The candidate will work extensively with suppliers to develop and execute qualification testing schemes and provide requirement verification artifacts. The candidate will need to closely collaborate with internal LM stakeholders as well as U.S Government representatives to ensure all requirements are met. Essential tasks...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. We are seeking an expert RF PCB Designer to lead the development of high speed, high...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: WHAT WE'RE DOING Provide technical support for Radar and/or Sonar Programs focusing on power‑supply design and power‑subsystem engineering. The role drives reliable, high‑performance power solutions that enable mission‑critical sensor systems. THE WORK Design, analyze, and simulate power‑supply circuits, distribution networks, and power‑conversion topologies to meet system requirements. Perform root‑cause investigations and develop corrective‑action plans for power‑related issues. Build and refine engineering procedures, seeking continuous‑improvement opportunities and greater efficiency. Mentor junior engineers, sharing expertise in power‑electronics best practices and troubleshooting techniques. Collaborate closely with senior engineers, subject‑matter experts, and cross‑program teams to integrate power solutions into radar/sonar platforms. WHO WE ARE Lockheed Martin is an equal‑opportunity employer that values integrity, and innovation. Our culture is...

Description: Lockheed Martin Space is seeking a full-time Electronics Engineer where you will work as a GNC Hardware Development Tech Lead on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in Sunnyvale CA and will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating...