27 assembler jobs found

Standard Job Description As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and integrates...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description You will be the Electrical Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer you will drive the design, analysis, integration and test of circuit card assemblies (CCAs) and related electrical subsystems. You will work side by side with systems, software, manufacturing and quality partners, providing hands on laboratory support and production assistance to keep programs on schedule, on budget and fully compliant with defense standards. Your responsibilities will include • Design and analyze CCAs, performing schematic capture, PCB layout and integration with system level architectures. • Conduct electrical testing,...

Standard Job Description You will be the Electrical Engineer Senior for the Hardware Engineering team at Lockheed Martin  Missiles and Fire Control (MFC). Our team delivers precision engagement aerospace and defense systems, designing, building and fielding the electrical hardware that powers missiles, sensors and other mission critical subsystems for the United States and allied militaries. What You Will Be Doing As the Electrical Engineer Senior, you will support the design, development, integration, test, and production of electrical hardware and subsystems for defense programs. Your responsibilities may include: • Serving as the primary technical contact for assigned subsystems or hardware deliverables across development and production phases • Providing technical leadership and guidance to subsystem suppliers, ensuring contract requirements flow accurately and hardware meets specifications • Owning the disposition of hardware through Material Review Board...

Standard Job Description As the electronics engineer you will be responsible for testing a variety of electronic equipment, system interconnect and cabling designs in support of the Test Support Products  You will participate in requirements analysis, configuration determination, design, materiel procurement, manufacturing, test and acceptance of cabling & interconnects for a wide variety of electrical and electromechanical test systems and multi-function integrated test equipment in support of the US Navy's Ballistic Missile Flight Test Program.     As the electronics engineer you will mentor junior engineers, interface extensively with our customer, as well as, senior leadership. You will also create/update project/process documentation that align to project requirements.    Specific responsibilities include but are not limited to:  Lead the design, procurement, assembly, test, and verification of missile test systems, including data  review and trending  Develop...

Standard Job Description As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO and Catia layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence, including occasional travel for site visits and field demonstrations • Managing drawing releases, responding to CRs, generating CN's, and presenting/supporting change boards and...

Standard Job Description You will be the Mechanical Engineering Design Sr supporting development and production of active and passive optical sensor systems. What You Will Be Doing: As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams.  Your responsibilities will include:  * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles  * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM  * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence  *...

Standard Job Description You will be the Mechanical Engineering Design Sr supporting development and production of active and passive optical sensor systems. What You Will Be Doing: As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams.  Your responsibilities will include:  * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles  * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM  * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence  *...

Standard Job Description Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a System Integration and Test Engineer at Lockheed Martin's Chelmsford, MA facility. You will be responsible for supporting the design, development, and testing of complex systems. Our team is dedicated to delivering innovative solutions, and you will play a key role in architecting new test stands, designing test solutions, and developing algorithms and techniques. What You Will Be Doing As a System Integration and Test Engineer, you will be responsible for: • Supporting the design, development, and testing of complex digital,...

Standard Job Description Lockheed Martin is seeking an Electro-Mechanical Test Technician to support engineering and production testing activities in King of Prussia, Pennsylvania. This hands-on position performs testing, troubleshooting, calibration, adjustment, and maintenance of electronic, mechanical, electromechanical, and related equipment and systems.   Key Responsibilities Support engineering and production testing activities in laboratory, fabrication, and test environments Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, and systems Perform electronic, mechanical, electromechanical, and related testing activities Read and work from schematics, engineering drawings, and written or verbal technical instructions Operate specialized test equipment and conduct tests using prescribed procedures Record and report test data in required formats and maintain applicable logs Perform calibration and alignment...

Standard Job Description You will be the Tool Design Engineer for the Missiles and Fire Control team in Ocala. Our team is responsible for designing dies, gauges, jigs, fixtures, prototype models, and robotics end-of-arm tooling for production or experimental purposes.   What You Will Be Doing As the Tool Design Engineer, you will be responsible for utilizing 3D modeling software to conceptualize, create, and integrate industrial machinery, equipment, and tools. Your responsibilities will include: Designing dies, gauges, jigs, fixtures, harness boards, prototype models, and robotics end-of-arm tooling for production or experimental purposes. Accounting for various factors such as accessibility, ergonomics, safety, economy, mobility, and performance requirements while developing solutions. Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production...

Standard Job Description Functionally tests, retests, evaluates, and verifies the performance of electrical, electronic,electro-optical, and electro-mechanical assemblies in accordance with established test procedures. Works from written data, such as, engineering specification, established test procedures, drawings, and schematics. Configures and operates test equipment. Utilizes tooling required to test, align, adjust, evaluate, and verify conformance of electrical, electronic, electro-optical, electro-mechanical assemblies to verify conformance to engineering requirements in accordance with established test procedures. Accepts and rejects hardware and creates acceptance and rejection documentation. Performs troubleshooting, including component level of production assemblies requiring ingenuity and the application of electrical principles. Plans work independently. Prepares and maintains test records and reports as required. Assists Test Engineering personnel and...

Long Description You will be the Program Manufacturing Engineer supporting Affortability/IRAD and MAC efforts as part of Air Dominance Operations team. Our team is responsible for creating and improving manufacturing strategies for complex missile assemblies, and we play a crucial role in developing and implementing solutions for technical and organizational challenges. What You Will Be Doing As the Manufacturing Engineer you will be responsible for driving improvement initiatives that support Air Dominance Production Operations. You will be tasked with improving the overall process of the build using complex, cutting edge technologies and automation. Supporting and participating in the strategy and execution of cost reduction initiatives across LM Sites and supply base. Support design, fabrication, assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems and...

Standard Job Description Please join us as an Electronics Design Engineer , where you will work on the production and integration of the Telemetry (TLM) avionics on the Next Generation Interceptor (NGI) program. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through...

Standard Job Description This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Englewood or Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate in requirements analysis, configuration...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description The coolest jobs on this planet...or any other...are with Lockheed Martin Space. Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems.  Do you want to join a team where employees envision the impossible, perform with excellence and build incredible products? Be a part of the Artemis and Orion teams taking astronauts to the Moon and beyond. This is your chance to be at the center of a generational program that will land the first woman and person of color on the Moon. As an ATLO (Assembly, Test, and Launch Operations) Electrical Test Engineer on the Orion program , you will be responsible for the planning, preparation, and execution of electrical integration activities for the Orion spacecraft for Artemis II (first crewed...

Standard Job Description You will be the Electrical Harness Engineer for the Aeronautics Electrical Engineering Team which is responsible for delivering advanced electrical harness solutions that power cutting‑edge aeronautics platforms. What You Will Be Doing As the Electrical Harness Engineer you will be responsible for shaping the electrical architecture that enables mission‑critical aircraft systems. Your responsibilities will include: Produce detailed electrical wiring schematic drawings and develop complex power distribution systems. Partner with subsystem engineers to define electrical loads, wiring requirements, and ensure seamless integration. Manage supplier relationships, author statements of work, and coordinate system check‑outs. Troubleshoot manufacturing processes, resolve build‑up issues, and guarantee flawless execution. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible...

Standard Job Description Job Description : You will be the Manufacturing Engineer - Level 2 for the International Co-Production Manufacturing Engineering support team which is responsible for... What You Will Be Doing As the Manufacturing Engineer - Level 2 you will be responsible for improving sub assembly build processes and driving cost effective, high quality production for F 16 components. Your responsibilities will include: Support production operations by refining sub assembly processes, eliminating repetitive defects, and reducing unnecessary costs. Develop and modify manufacturing plans, interpreting engineering blueprints to support both production and prototype articles. Investigate and resolve non conformances through root cause analysis and corrective action implementation. Optimize machining strategies for CNC mills and lathes to produce precision components efficiently. Collaborate with quality, production, tooling, and engineering teams...