26 quality assurance inspector jobs found

Standard Job Description What You Will Be Doing: This position will be part of the Aircraft Maintenance Team supporting U-2 Avionics Technical Refresh (ATR) and Programmed Depot Maintenance (PDM) Operations at Beale Air Force Base California. Performs the inspection of aircraft for functional operation and conformance to government and company standards and specifications. Inspects the installation and operation of electrical, avionics, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of the aircraft. Ensure aircraft are in good mechanical condition and safe for flight. Ability to plan/conduct Process Compliance Surveillance Program (PCSP) audits. Ability to conduct incident and/or mishap investigation audits, prepare quality documentation and reports by collecting, analyzing, and summarizing information, and trends including failed process, recalls, corrective actions, and validations. Ensure aircraft records are updated...

Standard Job Description You will be the Quality AssuranceLead Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Sustainment Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a First Shift position on a 4x10A work schedule...

Quality Assurance Inspector Specialist - 2nd Shift Job Description : You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to...

Standard Job Description Lockheed Martin Aeronautics Field Sustainment is seeking an Aircraft Maintenance Associate Manager to lead and manage the Interim Contractor Support (ICS) maintenance team supporting F‑35 operations at Ghedi Air Base, Italy. This position provides direct leadership, establishes maintenance priorities, and serves as the primary interface with Italian Air Force squadron leadership regarding F‑35 maintenance requirements and production matters.   What You Will Be Doing: The Aircraft Maintenance Associate Manager directs the ICS maintenance team in alignment with daily maintenance objectives, integrates closely with Italian Air Force leadership, and advises on maintenance priorities and operational impacts. The role oversees all ICS activities, including over‑the‑shoulder support, On‑the‑Job Training, and Lockheed Martin touch‑labor efforts in support of the customer’s maintenance organization. Responsibilities include managing personnel actions...

Standard Job Description WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicatedto pushing the boundaries of innovation and shaping the future of the industry. With a richlegacy of excellence and a commitment to delivering advanced capabilities to our customers,we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector throughgroundbreaking technology, advanced manufacturing processes, and a world-class team ofprofessionals. Our mission-driven approach and unwavering dedication to excellence ensurethat we continue to deliver superior products and solutions to our customers around the world. At Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within ourcapacity – and yours as a Lockheed...

Standard Job Description WHAT WE’RE DOING At Lockheed Martin, quality is critical to mission success. Within the Electronics Production Center, we manufacture circuit card assemblies, cable assemblies, box assemblies, LRUs, stack assemblies, and related electronic products supporting radar programs and emerging new work. Our quality team ensures products are built, inspected, accepted, and delivered in compliance with engineering, customer, contractual, and regulatory requirements while driving production excellence and continuous improvement. THE WORK This requisition is for a Staff Quality Engineer supporting radar programs and new work within the Electronics Production Center. This role will serve as a senior quality presence on the production floor and a key voice for quality-related decisions, technical guidance, and issue resolution. The selected candidate will provide quality leadership in a high-mix, high-volume manufacturing environment with emphasis on...

Standard Job Description This position is for the Precision Strike Missile (PrSM) Program to support the Quality Development Team. The role is responsible for applying systems‑level qualityengineering principles to ensure that missile subsystems and integrated assembliesmeet all reliability, safety, and performance requirements throughout the productlife‑cycle. They will be responsible for all aspects of Quality across the programs life-cycle including proposals, contract review, start-up, development, and transition toproduction support. Requires an understanding of quality tasks across quality functionsincluding hardware, software, systems and suppliers/subcontractors, and customers.Proficient in company policies. Partners with program teams as the Quality Lead fordesign and development. Performs contract reviews and flows down contract qualityrequirements to quality team, including suppliers.   What You Will Be Doing As the Quality Engineer you will be responsible for...

Standard Job Description You will be the Quality Engineer Sr for the Quality Engineering Team. Our team is responsible for ensuring product and process quality across the product lifecycle.   What You Will Be Doing As the Quality Engineer Sr you will be responsible for applying quality principles, conducting technical evaluations, and driving continuous improvement across design, production, and supplier domains. Your responsibilities will include, but are not limited to: Apply quality principles across design, incoming material, production control, and supplier processes. Conduct technical evaluations of product requirements, specifications, drawings, and procedures. Lead product failure investigations and drive corrective and preventive actions. Develop and implement strategies to improve internal and supplier performance. Design and analyze inspection and testing processes, performing statistical analysis.   Why Join Us The ideal candidate is...

Standard Job Description Analyzes, researches, designs and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Develops, analyzes and applies material properties and design allowables, processing processes and quality engineering specifications. Material analyses may include failure analysis of components, systems and subsystems, life predictions, and definition and requirement specifications. May review and approve subcontractor material processing procedures.  This is a second shift position working 2pm to 12am midnight Tuesday through Friday. Basic Qualifications Bachelor's degree from an accredited college in Chemistry, Chemical...

Standard Job Description Provides a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer. You will be a part of the Aircraft Maintenance Training Team at MCAS Miramar, San Diego supporting F-35 Maintenance activities across the full spectrum of Field Operations at various F-35 operating locations both inside the US and internationally.   What You Will Be Doing: This position serves as the Subject Matter Expert (SME) in the area of F-35 Aircraft Maintenance, Joint Technical data, Computerized Maintenance Management System (CMMS) Documentation, Action Request processing, Formal On-The-Job Task training/Certifier, and training development/design. The position also...

Standard Job Description IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. OCCUPATIONAL SUMMARY Perform non-destructive evaluation of materials, weldments, fabricated parts and assemblies through the use of non-destructive techniques (including ultrasound, magnetic particle, dye penetrant) and precision mechanical measurement devices (optical comparators, surface plates, gage blocks etc.). Interpret radiography reports and evaluate NDE services rendered by outside contractors. Inspect intricate machined parts, tooling fixtures, templates, patterns and gages used in fabrication of new, developmental and/or mock-up assemblies for conformance to specifications, workmanship, dimensional accuracy and blueprints. Train and certify inspectors and technicians in special skills as soldering,...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Makes work assignments for assigned personnel to accomplish scheduled and unscheduled maintenance on aircraft and components, primarily F-16. Responsible for aircraft work document reviews for accuracy and completeness, prior to final submission to quality. Provides technical assistance and direction to assigned personnel using technical data and drawings. Coordinate cross functional logistics requirements to acquire material and parts to complete assigned work. Executes hands-on maintenance or modification work as required to meet quality, cost, and schedule commitments. Works directly with Liaison Engineering and Planning to document and resolve technical issues.   The Production Lead will be responsible for providing status of work documents and work accomplished in their work area. The Production Lead will be required to interface with multiple functional organizations, in addition to the managers/supervisor and crew to resolve issues or...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Field Service Engineer (FSE). This position is located in Sabena, Belgium and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency.  What You Will Be Doing: Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. Provide advice in the...

Standard Job Description You will be the Optical Inspector for the Missiles and Fire Control (MFC) team. Our team is responsible for producing some of the world's most advanced weapon and sensor technology, utilizing the latest capabilities in manufacturing, including ultra-precision machining and additive manufacturing. What You Will Be Doing As the Optical Inspector, you will be responsible for performing a variety of inspection operations during the fabrication of optical elements and assemblies. Your responsibilities will include: -Inspecting in-coming raw glass and optical elements for dimensions, clear aperture, and other specifications -Inspecting optical/mechanical sub-assemblies and assemblies for proper fit, bonding, and surface quality -Using equipment such as interferometers, micrometers, and optical comparators to perform measurements and tests -Documenting non-conforming hardware and preparing paperwork and records Why Join Us We're looking for a...

Standard Job Description You will be the Sr Quality Engineer for the PrSM Program Quality Engineering Team. Our team isresponsible for leading Transition to Production efforts for the Precision Strike Missile (PrSM) production, driving continuous improvement initiatives, root cause and corrective actions, andensuring aerospace quality standards across Lockheed Martin sites and suppliers.   What You Will Be Doing As the Quality Engineer Sr you will be responsible for overseeing quality processes, coordinatingcross‑functional teams, and supporting hybrid on‑site/remote operations. Your responsibilities willinclude, but are not limited to: Participate & Lead Affordability/Efficiency projects Lead in quality initiatives within an Integrated Product Team (IPT) Leading investigations to resolve transition to production issues. Develop and implement inspection plans at LM sites and Suppliers. Collaborate with internal and external stakeholders to ensure...

Standard Job Description The Security Organization of Lockheed Martin Deposition Sciences, Inc. (DSI) is soliciting exceptionally qualified candidates to manage the safety and security of classified programs at DSI. The professional that is hired is committed to helping safeguard our workplace and to ensure compliance with U.S. government and other customer security requirements in support of U.S. national security interests. The chosen candidate for this position will perform as the Security Representative Staff supporting multiple Special Access Programs (SAPs) within DSI located in Santa Rosa, California, serve as a Contractor Special Security Officer (CSSO), and work with Facilities to maintain the physical security of the DSI site. They will implement cost effective and value-added security solutions that fortify our nation’s emerging technologies. The ideal candidate will: - Lead the DSI Security effort and develop, administer, and audit security programs associated...