22 information assurance engineer jobs found

Standard Job Description Lockheed Martin Aeronautics is seeking a full-time Material Review (MRB) Engineer located onsite at Edwards AFB, California covering F-35 Flight Test and depot level support for modification repairs.  The candidate must possess a unique set of skills combining strong engineering credentials with a solid understanding of depot practices and procedures. Primary duties of this assignment include anomaly investigation, technical solution development, preparation and release of dispositions for discrepancies on aircraft high performance airframe parts, electrical installations, fuel and hydrualic systems, and LO finishes in support of F-35 Flight Test mission objectives. Position requires a broad knowledge of aircraft maintenance and test support with the flexibility to work off hours and weekends.  Additional responsibilities include: - Coordinate across a large number of functional areas, including Stress/Service Life, Quality Assurance, Structures and...

Standard Job Description You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Mon-Thurs 4x10A - 2nd Shift What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible  for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards.  The Production Flightline APG, F-16 Technician Level 3 will also need to be knowledgeable in aircraft systems operation and maintenance to include:  • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery   The candidate will be required to:   • Comprehend documents such as safety rules, operating l be required to be a member of the...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Joining the LM ALIS/MPE team immediately opens a world of educational and experiential development opportunities for you. Tuition Assistance is available for undergraduate and graduate degree programs as well as professional and technical certifications to help you gain the specialized skills for personal and professional growth. Professionally, administrators develop the skills needed at our many domestic US and expanding number of International locations. For the adventurous, occasional temporary travel opportunities may arise to provide support at other locations and aboard ships deploying with the system. With experience, leadership opportunities become available as squadron leads, technical experts, and functional personnel leaders. This role is for an experienced Mission Planning Environment Administrator providing Joint Strike Fighter (JSF) Autonomic Logistics Information System (ALIS) support at Komatsu air base in Japan. The Mission Planning...

Standard Job Description What You Will Be Doing This position will be the Structures Lead for the F35 Wing Systems Manufacturing Engineering Team. This manufacturing engineering lead position will directly support the Wing System production build teams and will require direct coordination with Production, Engineering, Quality, IE, OE and Planning. The candidate should be a subject matter expert in manufacturing engineering and will be responsible for projects for production support, SRR reduction, HPU reduction initiatives, tooling improvements, engineering change management, and mentoring early career team members. Candidate must be able to manage complex technical issues and drive to resolution. All Wing manufacturing engineers are responsible for: • Maintaining/ improving our Standard Operating Procedures and Manufacturing Plans. • Driving our corrective action business rhythms. • Coordinating with other support teams for improvements and affordability initiatives. •...

Standard Job Description You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~   What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible  for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards.  The Production Flightline APG, F-16 Technician Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include:  • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery   The candidate will be required to:   • Comprehend documents such as safety rules, operating l be...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description Be More Than You Can Imagine. At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless.   Why Lockheed Martin At Lockheed Martin Aeronautics we value your unique skills and expertise and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our team’s favorite perks include: The promotion of Work Life Balance A competitive 401k match and bonus Comprehensive Benefits including Medical/Dental/Life Insurance Long term stability   The Challenge: This is an operational support role to an active fighter unit; you will be responsible for the security and integrity of our systems that keep...

Standard Job Description Be More Than You Can Imagine. At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless.   Why Lockheed Martin At Lockheed Martin Aeronautics we value your unique skills and expertise and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our team’s favorite perks include: The promotion of Work Life Balance A competitive 401k match and bonus Comprehensive Benefits including Medical/Dental/Life Insurance Long term stability   The Challenge: This is an operational support role to an active fighter unit; you will be responsible for the security and integrity of our systems that keep...

Standard Job Description We are seeking an experienced Autonomic Logistics Information System (ALIS) Administrator to provide operational and technical support to a U.S. Navy unit in Iwakuni, Japan. The ALIS system provides the critical IT infrastructure supporting the F-35 Lightning II, enabling aircraft planning, maintenance, logistics, and sustainment. In this expatriate role, you will help ensure the security, availability, and integrity of mission-critical systems that support aircraft readiness and operational effectiveness. The ideal candidate will have strong systems administration skills, attention to detail, and experience working in a mission-critical or military environment. As critical members of the F-35 Operations Team, all ALIS administrators must be able to: * Obtain and maintain Special Access Program clearance required for program access * This is an operational support role to active fighter units. Administrators must be willing and able to travel for...

Standard Job Description You will be the Material Handler for the Warehouse. Our team is responsible for supplying build material and hardware to support F-16 production and/or sustainment operations.    What You Will Be Doing   As the Material Handler you will be responsible for but not limited to the following tasks:  - Performing warehouse receiving, put away, picking or delivery operations for required material to support production and sustainment operations. - Performing required cycle counts of material and help maintain inventory accuracy. - Must have a valid State issued Driver’s License. - Must be able to stand and walk during the majority of work shift. - Must be able to operate warehouse machinery, to include Order Picker, Fork Lift, Reach Truck - Must be able to lift up to 25 lbs occasionally. - Must maintain clean work environment and required cleanup at end of shift. - Assists with other duties as required by Warehouse Leadership Team.   What’s...

Standard Job Description You will be a member of the Greenville Production Planning organization in support of the F-16 production line.  The Production Planning department is responsible for writing and maintaining work instructions, controlling configuration management, and incorporating engineering changes for F-16 production.   What You Will Be Doing   The Production Planner Sr will be responsible for the job functions and roles listed below: • Maintains the planning of various manufacturing processes including fabrication, assembly, and installation relating to a specific build area. • Incorporates work instruction change requests into master planning. • Creates work instructions for unscheduled production tasks (QARs, GPRs). • Provides customer support and works closely with cross-functional groups.. What’s In It For You: 3 day weekends every weekend!    ~ Candidate must be willing to work 4x10A Monday-Thursday 2nd Shift ~ From onsite to remote, we...

Standard Job Description   You will be the Avionics Technician Lvl 3 for the Lockheed Martin Greenville Avionics Backshop Team. Our team is responsible for building and repairing electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations.  ~This Position will be Mon-Thurs 4x10A Week schedule- 2nd Shift 3PM-130AM~   What You Will Be Doing   As a Backshop Avionics Technician Lvl 3 you will be responsible for building and repairing wire harnesses. Testing/installing electrical harnesses/components, routing various wire/cables, terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals....

Standard Job Description You will be the Industrial Engineer Senior - Level 3 for the Industrial Engineering Team which is responsible for driving operational excellence across our production and manufacturing facilities.   What You Will Be Doing As the Industrial Engineer Senior - Level 3 you will be responsible for analyzing workflows, enhancing processes, and delivering efficiency improvements that directly boost performance, reduce cost, and increase safety. Your responsibilities will include: Analyze and design workflows, operation sequences, equipment layouts, and labor utilization to maximize productivity and eliminate inefficiencies. Support cost‑control initiatives by conducting detailed studies and recommending actionable solutions. Create and maintain schedule plans to meet monthly customer delivery targets. Lead cross‑functional continuous‑improvement teams, partnering with Operations, Manufacturing Engineering, Planning, Quality, Safety, Facilities, and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment as a C-130J Avionics and Electrical Field Service Engineer (FSE). This position is located at a customer operating site in Saudi Arabia.   What You Will Be Doing: Provide a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer. The candidate will serve as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) technical interface to the on‑site customer, resolving issues that arise from any activity related to the C‑130 aircraft, and will be a Subject Matter Expert (SME) in Avionics and Electrical Systems disciplines.  Additionally, the role requires deep technical expertise and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Field Service Engineer (FSE). This position is located in Sabena, Belgium and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency.  What You Will Be Doing: Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. Provide advice in the...

Standard Job Description You will be the Industrial Engineer - Level 2 for the Industrial Engineering Team which is responsible for driving operational excellence across our production and manufacturing facilities.   What You Will Be Doing As the Industrial Engineer - Level 2 you will be responsible for analyzing workflows, enhancing processes, and delivering efficiency improvements that directly boost performance, reduce cost, and increase safety.   Your responsibilities will include: Analyze and design workflows, operation sequences, equipment layouts, and labor utilization to maximize productivity and eliminate inefficiencies. Support cost‑control initiatives by conducting in‑depth studies and recommending actionable solutions. Create and maintain schedule plans to meet monthly customer delivery targets. Lead cross‑functional continuous‑improvement teams, partnering with Operations, Manufacturing Engineering, Planning, Quality, Safety, Facilities, and other...

Standard Job Description Dismantles, moves, assembles, installs, and repairs industrial machinery and equipment according to layout plans, blueprints, drawings, or verbal instructions. Dismantles machines using hammers, wrenches, crowbars, and other hand tools; moves machinery and equipment using hoists, dollies, rollers, and trucks. Assembles and installs equipment such as conveyors and tram rails using hand and power tools; constructs foundations; aligns machines; performs routine inspection and maintenance and may replace worn or broken parts and reassemble. Assists in the overhaul and repair of complex mechanical equipment as needed.   You will be the Facilities & Fire Protection Specialist for the Lockheed Martin Greenville Location. Our team is responsible for maintenance, inspection and repair of the Lockheed Martin Greenville facility.    What You Will Be Doing   As the Facilities & Fire Protection Specialist you will be responsible for  inspecting,...

Standard Job Description You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools.  What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. Proficient in AI prompting as it applies to this position and practice     What’s In It For You: 3 day weekends...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment Team. Our customers include both the U.S. Military and international governments and organizations. Our global reach and technical depth offer an endless amount of opportunities for up-and-coming Autonomic Logistics Information Systems (ALIS) or Mission Planning Environment (MPE) professionals seeking a place to make their mark – or for seasoned Autonomic Logistics Information Systems (ALIS) or Mission Planning Environment (MPE) professionals seeking their next career challenge. ALIS/MPE Administrators directly support JSF operations by assisting the customer meets their daily flight schedules and will serve as the point of contact in customer discussions during the flight and evaluation activities while maintaining system functionality. The candidate must be able to obtain and maintain Special Access Program clearance required for program access. This is an expat position located in Ghedi Air...